Longshine LCS-8337TXR User Manual

PCI Express Gigabit Ethernet

Adapter

User's Guide

FCC Certifications

This Equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to
correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received; including interference that may cause
undesired operation.

CE Mark Warning

This equipment complies with the requirements relating to
electromagnetic compatibility, EN 55022 class B for ITE, the
essential protection requirement of Council Directive 89/336/EEC
on the approximation of the laws of the Member States relating to
electromagnetic compatibility.
Company has an on-going policy of upgrading its products and it
may be possible that information in this document is not
up-to-date. Please check with your local distributors for the latest
information. No part of this document can be copied or
reproduced in any form without written consent from the
company.
Trademarks:
All trade names and trademarks are the properties of their
respective companies.

Copyright © 2006, All Rights Reserved.

1

Table of Contents

1. UNPACKING INFORMATION........................... 3

2. OVERVIEW................................................................ 3

2.1 INTRODUCTION........................................................ 3

2.2 KEY FEATURES ......................................................... 4

2.3 LED DEFINITION..................................................... 4

3. INSTALLING THE PCI EXPRESS GIGABIT

ETHERNET ADAPTER ................................................ 5

3.1 SYSTEM REQUIREMENTS......................................... 5

3.2 HARDWARE INSTALLATION ..................................... 5

3.3 DRIVER INSTALLATION............................................ 6

4. PRODUCT SPECIFICATIONS........................... 9

2

1. Unpacking Information

Thank you for purchasing this PCI Express Gigabit Ethernet
Adapter. Before you start, please verify that your package
contains the following items:

1. One PCI Express Gigabit Ethernet Adapter.

2. One Driver/ Manual CD-ROM

2. Overview

2.1 Introduction

This PCI Express Gigabit Ethernet Adapter is a high performance
Gigabit Ethernet adapter designed for PCI Express Bus, which has
better performance than the current PCI interface.

With supporting connection speed up to 1000 Mbps, it boosts your
networking throughput easily. It allows users to transfer
high-bandwidth needed files faster and hence get a real efficiency
improvement.

This adapter also supports NWay auto-negotiation that detects
the networking speed (10/100/1000 Mbps) and the duplex modes
(full/half) automatically. Auto-MDI/MDI-X is also supported to
alleviate the effort choosing crossover cables.

3