
Setup
Installation
Instalación

radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
plug. A polarized plug has two blades with one
wider than the other. The wide blade is provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
periods of time or during lightning storms.
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
the mains by pulling the mains power plug.
The socket - outlet shall be installed near the
equipment and shall be easily accessible.
replaceable. Discard used batteries according to
the manufacturers instructions.
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
IMPORTANT SAFETY INFORMATION
– Adaptive-frequency hopping
= 2.5mW (variable adaptive power

You must pair your headset to a
4. Follow the pairing instructions for your
this is done by going to a ‘setup’ or ‘connect’ menu and then selecting
the options to ‘discover’
Turning the headset on and off:
seconds. A repeating beep will indicate that the microphone is muted. Quick-Press of
Volume up or down to discontinue mute.
4. When the LED turns off, your headset is fully charged.
Wearing and Using your Headset
single beep when answered
double-beep every 30 seconds
Alternating RED and BLUE flashes
Alternating RED and BLUE flashes
single high-low tone beep
single high-low tone beep
ame (stored in phone) after tone
Press multi-function button for more than 3 seconds
Connection to power adapter charger and plugging
into electrical outlet
(Some funtions are phone dependent)

hours to charge your headset when the battery is completely discharged.
if the signal from the headset to the phone is lost?
A lost signal between the headset and phone could be caused either by a low battery or if the phone is out
feet of the headset. If the battery
Yes. You can find it at www.logitech.com/adapter_offer.
Yes. Whenever a call is not active, the headset
power-conserving standby mode.
Yes. WindStop technology ensures that your listener will hear you clearly in strong winds experienced
when walking outside in a stiff breeze, with your car windows rolled down, air conditioning blowing in your
This device uses a 4.0V, 140mAh Lithium-ion battery that should last the lifetime of the device. If you suspect your
Mobile Freedom™ Headset does not have a user-serviceable
to replace your battery, you should follow the disposal instructions below. Consult local laws and
The battery used in this device may present a risk of fi re,
in accordance
with these instructions
Battery Disposal & Recycling

other rights which vary under local laws.
to: (a) repair or replace the hardware, provided that the hardware is returned to the point of purchase or such other place
as Logitech® may direct, with a copy of the sales receipt, or (b) refund the price paid. Any replacement hardware will be
warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer. These remedies are void
disassembly. Upon request from Logitech®, you must prove the date of original purchase of the hardware by a dated bill of
sale or dated itemized receipt.
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD-PARTY
Some jurisdictions do not allow limitations on how long an
SUBSTITUTE PRODUCTS OR SERVICES, LOST PROFITS, LOSS OF INFORMATION OR DATA, OR ANY OTHER SPECIAL, INDIRECT,
CONSEQUENTIAL, OR INCIDENTAL DAMAGES ARISING IN ANY WAY OUT OF THE SALE OF, USE OF, OR INABILITY TO USE ANY
Some jurisdictions do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply to you. The above limitations will not apply in
case of personal injury where and to the extent that applicable law requires such liability.
This Class B digital apparatus complies with Canadian ICES-003 and part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
for ANY interference, for example RADIO OR TV interference, caused by unauthorized modifications to this equipment. Such
fonctionne pas normalement ou s’il est tombé.
APPAREIL A LA PLUIE NI A L’HUMIDITE
ATTENTION: RISQUE D’ELECTROCUTION