Switch on from stand-by 11
Switch on/off with the remote control 11
Changing channels 12
Calling up audio/video channel positions 12
General information about the menu operation 13
Adjusting the sound 14
Setting the volume 14
Sound off/on 14
Other sound settings 14
Setting the picture 14
Downloaded From TV-Manual.com Manuals
- 2
Operation on the TV set 14
Switching channels on the TV set 14
Volume, brightness, contrast, color and picture format 14
Modes of operation 15
TV mode 15
Functioning of the colour buttons in TV mode 15
Show status display 15
Open index 15
Select picture format 15
Moving the picture vertically 15
TV menu 16
Teletext mode 17
Page selection with the coloured buttons 17
Other page selection options 17
Displaying teletext pages 17
Teletext menu 18
Radio mode 18
Radio menu 18
EPG - Programme guide 19
Using the EPG 19
EPG menu 20
Station selection 20
Switch on TV at memo 20
Operating additional equipment 21
Connecting recorders 21
Log in the device 21
Video playback 21
Calling an AV program in the AV selection list 21
Calling AV stations with the channel overview 22
Operating Loewe video recorders and Loewe DVD players directly 23
Functions for Loewe video recorders – Remote control RC4 23
Functions for Loewe DVD players – Remote control RC4 23
What to do, if ... 24
Technical data 25
General 25
Connections 25
Accessories 26
Service 27
Dolby and the double ‘D‘ symbol are
trademarks of Dolby Laboratories
Remote control RC4 – TV functions
Sound off/on
Switching over to operate VCR
Switching over to operate the TV
Timer functions
Picture adjust
Set picture format
Electronic Programme Guide
(EPG) on/off
Show/hide menu
Teletext mode on/off
Red button:
No function
Green button:
Personal/factory values
for picture and sound
In the menus: Connections
/initial installation - back
Switch on from standby
/switch off to standby
Switching over to operate
TV
VCR
T-C
DVD
DVD players
Picture menu on/off
Sound menu on/off
DISC-MENU
SV SP/LP 000
RADIO
Radio mode on/off
Select station directly
abc def
/in the menu: enter numbers
or letters
ghi jkl
mno
Call AV selection
pqrs
(1
EPG
tuv
AV
wxyz
PIP
No function
Status display on/off
/in the menu: back or hide menu
Index on/off
/in the menu: info texts on/off
P+/P– select station up/down
In the menu: select/set
V–/V+ Volume quieter/louder
Station table on
/in the menu: confirm/call
V–
V–
P–
P–
OK
OK
P+
P+
V+
V+
TEXT
V–
MENU
P+
OK
P–
END
INFO
V+
Blue button:
programme info
Yellow button: last station
No function
Downloaded From TV-Manual.com Manuals
(1
only for DVB-T models and
DVB-T stations.
Alternative
remote control
3 -
Control unit
Indicator:
red = standby
green = operation
orange = operation without screen display
(e.g. for radio operation)
Channel down,
in the menu: left
Radio on/off (back to TV mode),
Downloaded From TV-Manual.com Manuals
- 4
in the menu: down
Call the menu,
in the menu: up
Channel up,
in the menu: right
Switch TV set on/off
to standby
Connections to rear panel - Xelos A20 / Mimo L20
Input S-Video
Headphone socket
Input Video
Audio inputs
white: left
red: right
On/Off button
(mains voltage)
Downloaded From TV-Manual.com Manuals
220 - 240 V ~
AV 1
Socket
Euro-AV 1
AV 2
Socket
Euro-AV 2
AUDIO OUT
L R
Audio outputs
white: left
red: right
Service
Connect
service
ANT VHF/UHF
Antenna socket
TV/FM Radio
5 -
Connections to rear panel - Xelos A20 DVB-T / Mimo L20 DVB-T
Input S-Video
Headphone socket
Input Video
Audio inputs
white: left
red: right
On/Off button
(mains voltage)
220 - 240 V ~
AV 1
Socket
Euro-AV 1
AUDIO OUT
L R
Audio outputs
Service
Connect
service
Antenna socket
Antenna output
DVB-T tuner
DVB-T
connecting
DVB-T
Antenna
(1
cable
ANT VHF/UHF
Antenna socket
TV/FM Radio
white: left
(1
If the set is connected to an antenna system in which the digital (DVB-T) and analogue antenna signals are distributed together house internally, a connecting cable
must be plugged as illustrated. The antenne bridge then makes the connection with the analogue tuner.
In all other cases, connect your antennal(s) as described on page 9.
Downloaded From TV-Manual.com Manuals
- 6
Welcome
Thank you
for choosing a Loewe product.
We are happy to have you as a customer.
At Loewe we combine the highest standards of technology, design and user
friendliness. This applies equally for TV, video and accessories.
Neither technology nor design is an end in itself, but both are intended to provide our customers with the best possible audio and visual experience.
We have designed the TV set in such a way that it is easy to operate with
menus. Information about settings in menus is shown automatically for fast
comprehension of the situation.
You will fi nd the answers to many of your technical queries in the index of your
TV. If it is a matter of operating the TV, you can access a function directly from
the index. This saves you from having to read through detailed operating instructions and is the reason, why this operating manual only explains the most
important operating steps.
Features
You can fi nd out the features of your TV set by calling Index - Integrated fea-
tures (call up by pressing the INFO key in TV mode, while no menu is displayed).
With the remote control RC4, you can operate three Loewe units, this TV, a
Loewe video recorder and a Loewe DVD player.
Transporting
Only transport the unit in an upright position. Hold the set by the top and bottom edges of the housing. The LCD screen is made of glass and/or plastic and
may break if not handled carefully. Should the LCD screen become damaged
or should the liquid crystal begin to leak, then it is imperative you wear rubber
gloves when removing the set. Should the liquid come in contact with your skin,
thoroughly rinse with water immediately.
Note on LCD screen
The screen you have purchased meets the highest quality requirements in this
segment and has been tested for pixel errors. Despite the utmost caution in production of the sets, it cannot be totally ruled out that some of the pixels might
be defective for technological reasons.
Please understand that such effects cannot be considered as a unit defect in
the sense of the warranty as long as they are within the limits specifi ed by the
standard.
Installation options
as a desktop unit
Use the base included in delivery.
as a wall-mounted unit
•
Wall holder WM35, Loewe order no. 65495A00.
•
VESA adapter, Loewe order no. 89691A00
as a freel-standing unit
•
Flat-TV F-Stand 2, Loewe order no. 63495A00.
Cleaning
Use only a soft, clean, damp cloth to clean the TV, LCD screen and remote
control (don’t use any caustic or abrasive cleaning agents).
Disposal
Packing and box
You have chosen a long lasting technical product of very high quality. We have
paid a fee to authorised recyclers who will collect the packing from your dealer
for disposal, pursuant to domestic regulations. Nevertheless, we recommend
you to keep the original box and packing material for optimum protection if you
have to transport the set.
The set
Attention: The EU directive 2002/96/EC regulates the proper
way to recycle, handle and utilise used electronic devices.
Hence, all used electronic devices are to be disposed of
separately. Please do not dispose of this set in the normal
household rubbish.
You may return your used set free of charge at designated
recycling centres or at your specialist dealer whenever you purchase a new,
comparable set. You can fi nd out more about recycling (also for countries out-
side the EU) from your local government.
Downloaded From TV-Manual.com Manuals
7 -
For your safety
100 mm
For your safety and to avoid unnecessary damage to your TV set, please
read and observe the following safety instructions:
• This TV set is designed exclusively for reception and reproduction of video
and audio signals.
• This equipment is designed for domestic and offi ce environments and must
not be used in rooms with high humidity (e.g. bathroom, sauna) or high
concentrations of dust (e.g. workshops). If the equipment is used in the
open air, ensure that it is protected against moisture (rain, drips, splashes,
sprayed water or dew). Do not place any containers fi lled with liquids or lit
candles on top of the TV.
High levels of moisture and concentrations of dust cause leakage currents in
the equipment, which can lead to danger of electric shock or fi re.
The manufacturer‘s warranty is only valid for use in the specifi ed permissible
environment.
• If you have moved the TV set out of the cold into a warm environment, leave
it standing for about an hour since condensation may form.
• This equipment must only be connected to a mains power supply which has
the same voltage and frequency as that specifi ed on the rating plate; use
the power cable provided. Incorrect voltages can damage the equipment.
• Like all electronic equipment, your TV needs air for cooling. Obstruction
of the air circulation can
cause fi res. Therefore the
air vents on the back must
always be kept free. Please
do not place newspapers or
100
mm
100 mm
cloths on/over the TV.
If the TV is placed in a cabi-
net or on a shelf, leave at
least 10 cm at the sides and
10 cm at the top to ensure
suffi cient air circulation.
Position the set so that it is
not exposed to direct sunlight and additional heating from radiators.
• Prevent any metal parts, needles, paper clips, liquids, wax or the like from
getting into the TV set through the air venting slits in the rear panel. This
can lead to short-circuits and possibly to fi re. If something should get into
the inside of the TV set, pull out the plug immediately and notify customer
service.
• Never remove the back of the TV set yourself. Repair and servicing of your
TV set should only be carried out by authorised TV technicians.
• Place the TV set on a level, fi rm base. The set should not protrude at the
front when installing in cabinets or shelves.
Downloaded From TV-Manual.com Manuals
- 8
100
mm
Only use original accessories if possible, e.g. Loewe wall holders and stands.
Never let children handle the TV unattended.
Do not allow children to play in the immediate vicinity of the TV, they could
knock, shift or pull it over and injure someone.
Never leave the TV on unsupervised.
• Do not install the TV where there may be vibrations. Vibrations can lead to
material stress.
• Pull out the power and antenna cables during thunderstorms. Surge voltages caused by lightning strikes can damage the TV through the antenna
system and the mains. Also remove the antenna and mains plugs in long
periods of absence.
• The mains plug of the TV set must be easily accessible so that the set can be
disconnected at any time.
• Lay the mains cable in such a way that it will not be damaged. The power
cable may not be kinked or laid over sharp edges, not stood on and not exposed to chemicals, the latter also applies to the device as a whole. A mains
cable with damaged insulation can lead to electric shocks and is a fi re risk.
• When removing the mains plug, pull the plug housing and not the cable.
The wires in the plug could be damaged and cause a short circuit the next
time it is plugged in.
Initial installation
Remote control
Batteries
To insert or change the batteries press on the arrow. Slide the battery compartment cover downwards and remove it. Insert Alkali Mangan LR 03 (AAA) batteries and ensure that the + and – ends are connected correctly.
Slide the cover upwards to shut.
+
+
Information for the disposal of batteries
The batteries provided contain no harmful materials such as
cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries
may no longer be thrown out with the household rubbish.
Deposit any used batteries free of charge into the designated
collection containers set up at commercial businesses.
Antenna
Connect the cable system on the back of the set to the ANT VHF/UHF socket.
If separate antenne exist for the radio and TV reception, the two antenne must
be connected by an antenna switch. Appropriate antenna switches are available
from your dealer.
In DVB-T models, connect the DVB-T antenna to the DVB-T socket and connect
a FM (VHF) antenna to the ANT VHF/UHF socket if necessary (please remove
any plugged antenna bridge, see page 6).
Lay the cables in the cable holder in the rear middle of the TV set.
220 - 240V~
ANT
VHF/UHF
Xelos A 20
Mimo L 20
TV
R
220 - 240 V ~
220 - 240V~
DVB-T
ANT
VHF/UHF
Set the remote control for operating the TV
TV
How to operate other Loewe equipment is described on page 23.
Press the TV button.
Connection
Power mains
Plug the small plug of the power cable into the mains socket on the
back of the TV, the large plug into a a 220-240V/50–60 Hertz power
outlet.
Downloaded From TV-Manual.com Manuals
Xelos A 20 DVB-T
Mimo L 20 DVB-T
TV
R
220 - 240 V ~
If the reception conditions are good, then a room antenna may be used for
DVB-T. Passive and active room antennas are available on the market. The power is supplied for an active antenna via the antenna connection. For automatic
programming or in “TV Menu – Connections – Antenna DVB-T,“ the distribution
voltage (5 volts) is to be set correspondingly.
It may be practical to use a nondirectional antenna. If the location is outside the
normal transmitting range, then a unidirectional antenna may also be used to
improve the reception quality.
You can fi nd out more on the digital stations that can be received in your area
at your specialist dealer.
9 -
Initial installation
Switch On/Off
Press the On / Off button (mains voltage) on the right hand
side of the set until it locks.
The red indicator on the TV set now lights up (standby mode).
Switch on the set with the switch integrated in the display. The
(
green indicator now lights up (other operating possibilities,
see page 11).
It takes about 2 minutes after switching for the screen to reach full brightness
due to the LCD technology.
If you will not be using the TV set for a long time, e.g. during a vacation, switch
it off with the On/Off button (mains voltage). The set is then disconnected from
the power supply.
Automatic programming
Automatic programming of the TV set is started the fi rst time you switch it on.
Follow the menus
OK
OK
By pressing the OK button in the direction of the arrow
you select the setting ...
... and confi rm your settings with OK. You then go to the next
menu.
Back to the previous menu.
5. With OK you get an overview of which settings are to be used for the auto-
matic programming.
6. Press the OK button again to start the station search. The set searches for,
sorts and stores all receivable TV stations, according to your setting and the
connected antenna.
7. When the TV stations are stored, an appropriate message is displayed.
8. The radio stations are then searched for with OK.
9. The TV set searches for, saves and sorts all radio stations which are receivable on your antenna system.
10. When the radio stations are stored, an appropriate message is displayed.
11. The station search is terminated with OK.
12. Finally log in your recorder, DVD player etc. and connect it with the TV set
(also see page 21)
You can repeat initial installation at any time, e.g. after moving house.
INFO
OK
OK
Call the index with the INFO button.
Select the index item “Repeat initial installation“.
Start with OK.
Channel sorting
You can change the station sorting that was carried out automatically later at
any time, see “TV menu – Settings – Channels – Change“.
1. First you have to select the menu language.
In models without DVB-T, please continue with step 3.
2. Press the OK button to go to the ”Signal source” menu. If you want to re-
ceive terrestrial stations
digitally (only in DVB-T
models), select “DVB-T”,
confi rm with the yellow
colour button. If you se-
Signal source
Antenna/cable
DVB-T
OK
Proceed
Mark/unmark
Back
lect ”Antenna/cable” as well, you can also search for and store conventional
analog stations.
3. For specifi c national station sorting and pre-settings, enter the location at
which your TV is being used.
In models without DVB-T, please continue with step 5.
4. When you have selected ”DVB-T”, you go to the ”Antenna DVB-T” menu. If
you are using an active antenna, mark “yes (5V)”.
Downloaded From TV-Manual.com Manuals
- 10
Initial installationDaily operation
m
Directing DVB-T antenna
(only for DVB-T models)
If you use a room antenna to receive one or more DVB-T stations that have
picture and sound interference, then you should change the location of where
the antenna is set up.
To help you direct your antenna or to help you determine the most suitable location to set up the antenna, your TV set has a display for the signal quality C/N
and the signal strength Level.
Consult your specialist dealer to fi nd out which channels and frequency bands
(VHF or UHF) are used to broadcast the digital TV stations in your area.
On any one channel, several digital stations are broadcast.
Select a TV channel
1. Call the “TV menu“ via the MENU button.
2. Use to select “Settings“, then use to select the menu line under-
neath.
3. Select “Channels“, then use to select the menu line underneath.
TV menu
Settings
Channels
Manual settings
search
4. Select “Manual settings“ and call the menu using OK
Manual settings
Signal source
Channel
Frequency
Name
C/N 96
5. For digital stations, select “Signal source – DVB-T“.
6. Use the numerical buttons to specify the corresponding channel number.
When you receive a digital station, the system displays the signal quality
C/N via a bar/numeric value and the signal strength via Level. The antenna‘s direction or position is best when the largest values possible are
displayed (long bar) for the signal quality and signal strength.
7. Direct the antenna so that the largest numerical value/bar size is reached.
8. If no signal is found in the channel set, you can start the frequency search
run by pressing the blue button within the band selected (VHF or UHF).
9. Check the other channels one after another on which digital stations are
broadcast terrestrially in your area.
For the weakest station, direct the antenna so that the maximum numerical
value/bar size is achieved.
10. After you position or direct the antenna, we recommend to search for all the
stations using the “Search wizard“ (TV menu – Settings – Channels – Automatic search).
Downloaded From TV-Manual.com Manuals
OK
DVB-T
E 05
177.50 MHz
Test
Level 99
Change
Search
Store
Antenna/cabl
END
INFO
Switch on from stand-by
On the set:
If the LED on the set glows red or orange:
Press the display window to switch the set on.
(
If the red LED on the set is not alight:
Press the On / Off button (mains voltage) on the right hand
side of the set.
Switch to stand-by:
Press the display window, the LED changes colour from green
(
Switch on/off with the remote control
END
INFO
Auto
wxyz
OK
RADIO
RADIO
END
to red.
The set is on stand-by, the red LED is alight:
Press the blue on/off button on the remote control to switch
on the set or ...
AV
with a numeric key (0 – 9) or ...
with the OK button.
The green operating LED then lights up.
Switch on radio mode:
(see also page 18).
Press the Radio button.
Switch off radio mode:
Press the Radio button again or ...
press the button END.
11 -
Daily operation
Changing channels
1. With cursor ring
P+
P–
OK
V–
V+
2. With the numeric keys of the remote control
pqrs
abc
pqrs
pqrs
wxyz
P+ / P-: Channel up/down.
1 digit stations
Press keys 0 – 9 for one second, and the station changes
instantly.
Or press button 0 – 9 briefl y, the station then changes after
2 seconds (the station changes immediately when only 9 stations are stored).
2 digit stations
After briefl y pressing the fi rst numeric button keep the second
numeric button pressed for one second, the station then
changes immediately.
Or press both numeric buttons briefl y, the station then
changes after 2 seconds. (the station changes immediately
when only 99 stations are stored).
3 digit stations
After briefl y pressing the fi rst and second numeric button keep
the third numeric button pressed for one second, the station
then changes immediately.
Or press the three numeric buttons briefl y, the station then
changes after 2 seconds (the station changes immediately
when only 199 stations are stored).
12 WDR
13 BR
14 HR
15 MDR
16 ARTE
17 KIKA
18 PHOENIX
19 BR-ALPHA
20 3SAT
21 KABEL
22 CNN INT.
23 H O T
24 TV 5
25 TRT 1
or
AV
wxyz
OK
select with numeric buttons,
call selected station.
Note: Digital DVB-T stations (only in DVB-T models) are marked by “D“.
Calling up audio/video channel positions
OK
OK
via the station table:
AV1 for playing a video device which is connected to the
EURO AV socket 1.
AV2 for playing a video device which is connected to the
EURO AV socket 2.
(AV2 is not available in DVB-T models).
END
MENU
The set has 200 TV memory locations and 3 audio/video memories (AV). DVB-T
models have 2 audio/video memories (AV).
Downloaded From TV-Manual.com Manuals
- 12
OK
AVS for playing a video device which is connected to the right
hand side of the set at the ”S-Video input” or ”Video input”.
Call with the OK button.
(Further information can be found on page 22).
Daily operation
General information about the menu
operation
We show you how to navigate with the menus with the TV menu as an example.
You‘ll be able to see which to use from the dark blue box on the right.
MENU
OK
OK
OK
OK
Open TV menu (in TV mode).
END
TV menu
Picture
Sound
Connections
INFO
Settings
Select the function in the TV menu, e.g. “Sound“ (for sound
settings). With you move the menu items displayed on the
right to the dark blue box, with the menu items displayed
on the left.
END
INFO
Picture
TV menu
Sound
Connection
Settings
Select the sound function below with , you will then see a
list of the sound settings.
TV menu
Sound
Sound adjust
normal
Listening mode
Loudness
Treble
Bass
END
INFO
For the audio settings also select the function with , e.g.
“Loudness“ (for treble and bass increase at low volume).
TV menu
Sound
g mode
Loudness
off
Treble
Bass
other ...
END
INFO
To switch on the Loudness function, mark with “on“.
TV menu
Sound
Loudness
off on
END
INFO
OK
or select “off“ with .
TV menu
Sound
Loudness
onoff
END
INFO
If you want to make other audio settings, go up to “Loudness“
with and select “other“ with for example. You can
OK
also move up further to “Sound“ with and select other
settings in the TV menu.
OK
OK
OK
OK
INFO
TV menu
Bass
Sound
other ...
OK
Have the other audio settings displayed with OK. With
select the audio setting, e.g. “Maximum volume“
TV menu
signal
Sound
Maximum volume
26
and mark the setting bar for maximum volume with .
TV menu
Sound
Maximum Volume
26
Set maximum volume with Information about the current setting is displayed in the top part of the screen when you
press the INFO button.
END
INFO
Sound adjust
END
INFO
Sound adjust
END
INFO
You can hide the infos by pressing the INFO button again.
You can increase the treble (values 1 to 12)
or reduce it (values -1 to -12).
TV menu
END
Sound
Tre bl e
0
Bass
other ...
To hide all menus, press the END button.
INFO
END
Sound
You are now familiar with handling of the menus so that you can easily operate
the TV with the other menus.
Downloaded From TV-Manual.com Manuals
13 -
Daily operation
Adjusting the sound
Setting the volume
P+
V+
With V- / V+.
Volume
24
P–
OK
V–
Sound off/on
Sound off;
Sound on: Press button again or ...
adjust volume with V- / V+.
Other sound settings
Call the sound menu.
TV menu
Sound
Sound adjust
normal
OK
OK
Select the sound function to be set with and with to
the appropriate selection...
TV menu
Sound
Listening mode
Stereo
... and select/set with .
Sound settings: Sound adjust (normal, Pop, Classical, Speech), Listening mode
(Stereo, Panorama, Dolby Virtual), Loudness, Trebel, Bass.
Under “other ...“ you will fi nd Sound via (TV or HiFi), Loudspeaker sound, AV
audio signal, Maximum volume.
Listening mode Loudness Treble Bass
Panorama
Dolby Virtual
Setting the picture
Open the Picture menu.
TV menu
Picture
Picture adjust
normal
OK
Downloaded From TV-Manual.com Manuals
- 14
Select the picture function to be set with and with to
the appropriate selection...
and sharpness. After ”others....” you will fi nd brightness, tint in NTSC, picture
format (4:3, cinema, zoom, 16:9 zoom, 16:9), Move pict. up/down and movie
mode (DMM).
Operation on the TV set
Switching channels on the TV set
+ Channel up
(
– Channel down
Volume, brightness, contrast, color and picture format
END
INFO
(
END
INFO
Direct control on TV set
VolumeBrightness
24
Contrast
Open the menu with M.
Brightness
Direct control on TV set
Contrast
18
Picture format
Service
Select the function to be set with – or +.
Direct control on TV set
Contrast
18
With R to the appropriate setting/selection.
Picture format
(
Brightness
24
Set/select with – or +.
END
INFO
INFO
With M you go back up one level and can select other functions with – or +.
END
Modes of operation
TV mode
In initial installation and daily operation, the TV set is in TV mode. This is also
the case when none of the other modes of operation such as EPG, Teletext or
Radio has been selected. Each of these modes of operation has a menu, which
you can call with the MENU button and with some color button assignments.
Functioning of the colour buttons in TV mode
red: no function
green: call personal values/factory values for picture and
sound, save picture and sound values as personal values.
Standard settings
Call up personal settings
yellow: call last viewed channel. You can switch back and
forth quickly between two channels with this button.
blue: call programme info
(for DVB-T stations
(1
the EPG with the current station info is
called, see page 19).
301 301 ARD-Text Mo 05.12.05 16:16:42
05.30 ZDF-Morgenmagazin
09.00 heute
09.05 Die glückliche Familie
Tami in Gefahr
09.55 ARD-Wetterschau
10.00 heute
10.03 Verstehen Sie Spaß?................................314
If other languages are broadcast by DVB-T stations
guage/Sound Selection” is displayed under the station display.
Call the Language/Sound selection with the green colour button and select with . Confi rm the setting with OK.
If DVB-T stations
(1
offer subtitles, “DVB subtitles” is displayed
under the station display. Call the setting for DVB subtitles
with the yellow colour button and select the options with
. Confi rm the setting with OK.
OK
Call up factory settings
Mo 05.12.05 Das Erste
morgen morgen
INFO
(1
the “Lan-
Open index
INFO
END
The index answers many questions, concerning your TV set. If you have a question about the operation, you have direct access to it from the index.
This set is delivered in different variants. You can fi nd out what equipment your
TV has under the menu item “Integrated features”.
Open index.
In the "Language" menu you can select your menu language for
operating the TV set.
Index 1/2
Language
Additional functions
Channels
Connections
Integrated features
Parental lock
Picture Setting
Programme info
OK
Activate
P+/P- Page /
OK
END
Select picture format
If you want to set a different format, press this button until the
desired format is selected or select the format with .
Picture format
4:3
cinema zoom
zoom 16:9
16:9
Moving the picture vertically
OK
(1
only for DVB-T models.
To reveal picture captions, the picture can be moved vertically
up and down with in the “Cinema” and “Zoom” picture
formats. The vertical moving of the picture is only possible
when the picture format menu is displayed and the appropriate picture format has been set.
15 -
Modes of operation
TV menu
MENU
You will fi nd a description of the picture and sound settings on page 14. The TV
menu offers other settings for the TV set and for connected devices.
Select devices to be connected under “Connections”:
For example video recorder, DVD player/recorder, camcorder/digital camera or
Pay-TV decoder.
Select the connection (AV1, AV2
1.
device.
Confi rm with OK.
2.
3.
Select the device type , e.g. DVD and the signal type CVBS in the list which
appears.
4.
Confi rm with OK.
5.
Specify which colour standard (e.g. PAL) the connected device transmits the
signal with. Note: The signal cannot always be displayed correctly when the
“Colour standard Automatic” is selected.
6.
Confi rm with OK.
Other settings under ”Connections”
7.
”RGB insertion yes” (via AV1) to play RGB signals e.g. from a games console
on all channel positions.
8.
”Switching voltage yes” so that the picture is immediately visible on the
screen when playing back from a video device connected to the EURO-AV
socket.
Call up TV menu.
TV menu
Picture
INFO
Sound
(1
or AVS) to which you want to connect the
Connections
Settings
END
Under “Settings“ you will fi nd the following functions:
Channels
• Automatic search • Manual settings • Change
Parental lock
If you do not want your children to be able to use the TV unsupervised, activate
the parental lock by entering a four-digit access code. You can change or delete
this access code in the ”Parental lock” menu (see also page 28).
Switch the set to stand-by after entering the access code or switch it off with
the On/Off button (mains voltage). When switching on the set only shows a
picture when you enter your access code.
Timer functions
You can have your TV switch off at pre-programmed times or wake
you/remind you with radio or TV. If you are not present at the time, a safety
prompt makes sure the TV switches off again after 5 minutes.
• TV off once only • One-time reminder • Wake up (Mo - Su)
• Wake up with TV or Radio • Wake up volume
Time and date
When you receive teletext, the correct date and time setting is picked up by the
set automatically. The time is for information for timing services, e.g. alarm. If
you do not receive teletext you have to set the date and time manually.
Use the numeric buttons on the remote control and the arrows to move
from one digit position to the next.
In the time and date menu you can also set when you want the TV set to automatically start and end daylight saving. You can also set a deviation UTC.
Language
You can set the language in which the menus are displayed under Settings
- Language.
If “your“ menu language is not set, you may have to select the “Language“
menu in a language you cannot understand:
1.
Press the INFO key while no menu is displayed. The index appears.
2.
Select the fi rst entry on the fi rst page (1/2), if it is not selected automatically.
3.
Confi rm with OK.
You are now in the language menu and can select your language and enter it
with ”OK”.
(1
AV2 is not available in DVB-T models.
Downloaded From TV-Manual.com Manuals
- 16
Modes of operation
Teletext mode
Teletext transmits information such as news, weather, sport, program
previews and subtitles.
TEXT
Many stations use the TOP operating system, some use FLOF (e.g. CNN). Your TV
supports both these systems. The pages are divided into topic groups and topics. After switching on the teletext, up to 252 pages are stored for fast access.
Page selection with the coloured buttons
The coloured bars (in TOP) or the coloured writing (in FLOF) in the penultimate
row show you which coloured buttons to use, to scroll to topic groups and
topics.
Formel 1: Schumacher erneut vorne . . . . . . . 213
Teletext menu
Reveal
Reveal +
Seitenauswahl
ARD TEXT
Teletext im Ersten
OK
Settings
Index
> 101
INFO
END
Radio mode
RADIO
You can switch radio operation on and off with the
RADIO button on the remote control or ...
R on the operating ring on the TV.
(
You see a station table of the radio stations.
Radio mode: 5 ROCK ANT
Pop
1 B5 AKTL
2 BAYERN 1
3 BR4 KLSK
4 SUNSHINE
5 ROCK ANT
6 ANTENNE
OK
Switch over
09
Select station
Scan stations
Previous station
Screen off
You can switch off the screen with the red button. The LED on the TV changes
from green to red. You can switch the screen display back on with the red or the
END button on the remote control or with R on the operating ring of the TV set.
Station switching with dark screen: with – or + on the operating ring on the TV
set or with the remote control P– and P+ or with the numeric buttons.
The Sound menu can be called with the
Search for radio channels and store them (automatically or manually), delete,
move or rename them.
•
Set timer functions.
Call Radio menu.
Radio menu
Sound
Channels Timer functions
INFO
END
Modes of operation
EPG - Programme guide
(only for DVB-T stations)
EPG is an electronic program guide. With this system, you can easily fi nd the
stations that interest you (sorted according to date, time, channel and topic)
and tag these stations if required.
Using the EPG
EPG
Switch EPG on/off
EPG (Electronic Programme Guide) Tue 10.09./14:14
Tue 10.09.
Date
now
Time
Channels
P+/P–
The programme guide menu is divided into two areas: at the top, you can
make the settings for the programme list (date, ..., topics); on the bottom, the
programme list is displayed. Use the blue coloured key to switch between the
two areas to make your selections.
All programmes currently running are listed initially in the programme list. With
the buttons, select the programme you want to watch and switch over
with the OK button.
Use P+/P– to scroll up or down through the pages of the programme guide. In
the selection lines for date and time above, you will see the time change when
scrolling; when you scroll further, the date also changes. When the “Time” line
is selected, you can enter the time as of which the programmes are to be displayed; use the numeric buttons on your remote control to do this. Always enter
four digits, such as 0900 for 9 a.m.
If programmes are displayed which have not yet started, you can mark these
with the OK button. The TV set then switches automatically to this station at the
given time.
You have direct access to the selection lines above to pre-select the day, the
time, the station and the topic.
all
all
Topics
13:20-14:15 Kabel 1 Die Waltons
13:30-14:15 H3 ARD-Buffet
13:55-14:20 Kinderkan Blaubär & Blöd (37)
14:00-14:15 ZDF heute - in Deutschland
14:00-15:00 RTL Das Strafgericht
14:00-15:00 Sat 1 Zwei bei Kallwass
14:00-15:00 Pro7 Das Geständnis - Heute sage ich al
14:00-14:30 N3 DAS! ab 2
14:00-14:20 WDR Die kleinen Strolche (10)
Familienserie - Sturzflug
OK
Page
/
View
Select date, ..., topics
OK
END
MENU
Blue coloured key: Call Select date/time/stations/topics
EPG (Electronic Programme Guide) Tue 10.09./14:14
Date
Tue. 10.09.
Time
Channels
Topics
now
all
all
06:00-06:20 ZDF Die Blobs
06:00-06:30 RTL Wunderbare Jahre
06:00-06:25 Kabel 1 Dennis
06:00-06:25 N3 Extra en español (5)
06:00-06:30 BR Goal. Speak English, Play Football
06:00-06:30 WDR Lokalzeit Südwestfalen
06:00-07:10 SuperRTL Infomercials
06:00-07:10 Kinderkan Reif für die Dodo-Insel (25)
14:00-14:20 9LIVE Reisetraum
Comedyserie - Kandidaten mit gewissen Fehlern
soon
Change to programme list
END
MENU
Use to select the menu line for the date, time, stations or topics. Use
to select within the menu line.
If, for example, you are looking for the next news, select today’s date, “Soon“
under Time, “All“ under Stations and “News“ under Topics.
Then you get a list of all news programmes in the programme list below.
If you want to mark one of these news programmes, return to the programme
list using the blue coloured key, select the desired news programme by using
and mark this by using OK.
In front of the programme’s title, the system places an
. This station is
switched later to this programme when the set is switched on. If the TV is off,
it switches on again automatically at the beginning of the marked programme
if this has been set in the EPG menu. If you are out, a security prompt prevents
the TV set staying on unattended.
Before leaving the upper selection lines using the blue coloured key, select a
specifi c line. If you have switched back to the programme list, you can change
this menu line using without having to leave the programme list.
Downloaded From TV-Manual.com Manuals
19 -
Modes of operation
EPG menu
MENU
You will fi nd the following settings in the EPG menu:
• Station selection • Switch on TV when marked
Call EPG menu
EPG menu
Station selection
OK
Switch on TV when marked
END
INFO
Station selection
If you want certain stations not to appear in the program guide, you can select
and deactivate these in the station selection. Call the station selection in the
EPG menu.
All stations are marked initially. These stations are then available for the
evaluation in the program guide (prerequisite: EPG data are transmitted for the
respective station).
You can change the station selection with:
OK
END
INFO
Switch on TV at memo
You can have the TV switched on automatically from standby at the beginning
of the memorized program. If you are not present at the time, a safety prompt
makes sure the TV switches off again after 5 minutes.
The prerequisite for switching on is that “Switch on TV when marked” in the
EPG menu is “yes”.
OK
Select/remove individual stations.
green coloured button: All stations are selected.
yellow coloured button: One station is selected. All selected
stations are then removed.
Downloaded From TV-Manual.com Manuals
- 20
Operating additional equipment
Connecting recorders
Connect your antenna or cable connection to the recorder (1).
1.
Connect the recorder to the Euro-AV sockets on the TV set if possible (2).
2.
Connect the antenna output of the recorder to the antenna input of the TV
3.
set (3). The antenna signal is then available to both the tuner in the recorder
and in the TV set.
3
2
ENTREE
EURO AV2
DECODER
EURO AV1
AUDIO/
VIDEO
SORTIE
GL
D
ANTENNE
AUDIO
AERIAL
OUT
SORTIE
ANTENNE
R
RF OUT
Log in the device
Call the TV menu.
1.
Select “Connections“.
2.
Select the free connection (AV1, AV2
3.
Select the device type you want to connect and its signal type in the connec-
4.
(1
or AVS).
tion wizard, e.g. “VHS/8 mm....VCR“ for video recorder.
Confi rm with OK.
5.
Select the colour norm of the video device. If you do not know it, select
6.
”automatic”.
Confi rm with OK.
7.
Video playback
You get the best picture and sound reproduction when the recorder, DVD player
or camcorder is connected by an AV cable (Scart cable) to one of the AV sockets
of the TV.
When you are playing a video recorder, DVD player, camcorder or digital
camera, select the AV socket to which the video device is connected with ”AV
selection” (button 0 AV) or with the station table.
Recorders transmit a switching voltage during playback which the TV set can
decode (set Connections – Switching voltage to ”yes” in the TV menu). Then the
picture of the recorder is shown at the current channel position during playback.
Calling an AV program in the AV selection list
AV
Call AV selection.
AV selection
AV1
OK
OK
Select AV socket for external video device.
Call with OK.
1
OK
AV2
AVS
220 - 240 V ~
Downloaded From TV-Manual.com Manuals
Now you will see the playback from the connected video device.
(1
AV2 is not available in DVB-T models.
21 -
Operating additional equipment
Calling AV stations with the channel overview
OK
OK
OK
Now you will see the playback from the connected video device.
Call the channel overview with the OK button in TV mode.
Channel overview
AVS
AV 2
AV 1
0 VIDEO
1 ARD
2 ZDF
3 SAT.1
4 RTL
5 VOX
6 3SAT
7 S–RTL
8 N–TV
9 DSF
10 TM3
11 PRO7
OK
Switch over
0 9
- Select station
12 WDR
13 BR
3
14 HR
3
3
OK
15 MDR
3
16 ARTE
17 KIKA
18 PHOENIX
19 BR-ALPHA
20 3SAT
21 KABEL
22 CNN INT.
23 H O T
24 TV 5
25 TRT 1
Change programmes
You will always fi nd the AV sockets at the top of the list with-
out station numbers.
Select the AV socket.
Call with OK.
END
MENU
Search for and store the station of the video recorder (if no Euro AV
cable is available)
Switch on the test station on the VCR or insert a recorded tape and start playback. In some video recorders the station must be switched on by activating the
modulator.
Then call the AV selection on the TV set with 0 AV. Select the menu item “0 VIDEO“ in the AV selection and call with OK.
To prevent “normal” TV stations being found in the search, pull out the antenna
plug from the antenna input of the VCR temporarily (the cable to the antenna
system).
If you cannot see the test station or playback from the cassette, the VCR is
transmitting on a different channel. You then have to search for the station or
set it manually.
1.
Call the TV menu with the MENU button.
2.
Select the “Settings“ menu item with .
3.
Select the line below it with and “Channels“ with .
4.
Select the line below with and “Manual settings“ with and call this
menu with OK.
5.
For models without DVB-T:
Select “UHF” in the “Range” menu item and enter “E30“ under the “Channel”
menu item.
For models with DVB-T:
Select “Antenna/Cable” in the “Signal source” menu item and enter “E30“
under the “Channel” menu item.
6.
Start search with the blue button.
7.
If the station has been found, enter the name VIDEO, confi rm with OK and
save with the red button.
8.
A list of the stored stations is displayed.
9.
Select 0 (VIDEO) here and overwrite this program place with the red button.
10.
Hide the menu again with the MENU button.
Downloaded From TV-Manual.com Manuals
- 22
Plug the antenna plug back in.
If you now get interference because a TV station is transmitting on the same
channel as the VCR station, you have to change the transmitting station on the
VCR and search for the VCR station on the TV again.
Operating additional equipment
Operating Loewe video recorders and
Loewe DVD players directly
You can switch over the remote control of the TV set to operate Loewe video
recorders and Loewe DVD players. These devices can be operated directly.
Select the device to be operated:
VCR
DVD
TV
Functions for Loewe video recorders – Remote control RC4
Sound off/on (mute)
Operating the TV set
Display/close Timer list
ShowView timer Menu
Switch to Long Play
Call AV selection (TV)
/in menu: select/set
V–/V+ volume quieter/louder
Call up station list
/in menu: call up/confirm
/search backwards
Pause (still frame)
/frame-by-frame advance
Press VCR button, the lamp above lights for about 5 secs.
Press the DVD button, the lamp lights up for about 5 secs.
Switch back to TV operation: Press the TV button.
Switch recorder
Operating VCRs
Display/close
/Standard Play
VCR menu on
/in menu: back
Reverse play
Rewind
Start recording
VCR
TV
T-C
DISC-MENU
SV
SP/LP 000
abc def
ghi jkl
pqrs
tuv
EPG
AV
END
MENU
TEXT
P+
V– V+
OK
P–
on/off – in standby
Operating DVD players
DVD
Select picture and sound source
Select video and audio input
RADIO
Set time display to 0:00:00
Select station directly
/in menu: enter digits
mno
wxyz
PIP
Set picture format (TV)
Status display on/off
in the menu: Close menu
INFO
Status display on/off
on playback: Slow motion forward
/in the menu: select/set
or to the next menu
/
at stop: Program up/down
on playback: manual tracking
in the menu: Select position
Fast forward
/search forwards
Start playback
Stop tape
When operating in the VCR or DVD mode, the lamp above the VCR or
DVD button lights.
In DVD mode the following DVD players can be operated: Xemix
6122DO, 8122DA und 6222PS.
In VCR mode the following VCRs can be operated: ViewVision 8106H,
8136H, 8176H.
For other Loewe equipment than that listed, please use the original
remote control.
DVD Recorder Centros: with the enclosed remote control of the Loewe Centros
DVD recorder it is also possible to control the TV functions.
Functions for Loewe DVD players – Remote control RC4
DVD
mno
wxyz
PIP
INFO
Switch DVD on /
off on standby
Operating DVD players
Select chapter
Repeat
Zoom
Select Chapter;
in menu: enter digits
Set picture format (TV)
Status display on;
in menu: close menu
DVD menu on,
previous function activ;
in menu: info on/off
/ :
Chapter up/down
in menu: select up/down
/
Search back/forward
in menu: select left/right
Next chapter
/search forward
Playback
Stop
Sound off/on (mute)
Operating VCRs
Operating the TV set
Set marker
Select camera position
User interface of
loaded DVD on
Call AV selection (TV)
DVD menu on;
in menu: back
V–/V+ volume
quieter/louder
Title/Chapter Table;
in menu: call/confirm
Beginning of chapter or
previous chapter
/search back
/single frame, slow motion
Pause
VCR
TV
T-C
DISC-MENU
SV SP/LP 000
ghi
pqrs
EPG
MENU
TEXT
V– V+
RADIO
abc def
jkl
tuv
AV
END
P+
OK
P–
Downloaded From TV-Manual.com Manuals
23 -
What to do, if ...
ProblemPossible causeHelp
The device cannot be operated.Parental lock is activated.Deactivate the parental lock: In the TV menu - Settings
- switch off parental lock or enter secret code.
General problems with connecting external devices
via an AV input.
No sound via the TV loudspeakers.In the Sound menu - other the item “Sound via ...“
All menus appear in the wrong language.Wrong menu language set.Press the INFO key while no menu is displayed. The
Various characters are displayed incorrectly in
teletext.
a) The AV standard is set incorrectly
b) The AV signal is set incorrectly
is not set to “TV“.
The wrong character set is set in the Teletext
menu.
a) Set the standard correctly
b) Set the AV signal correctly
If “Automatic“ is set for AV standard or AV signal, this
can lead to faulty detection in the case of non-standardized signals. Then the standard and the signal must
be set according to the specifi cations in the operating
manual of the external device.
Change setting to “TV“.
1.
index appears.
2.
Select the fi rst entry on the fi rst page (1/2), if it is not
selected automatically.
3.
Confi rm with OK.
You are now in the language menu and can select your
language.
Set the correct character set: Teletext menu - Settings Character set - Standard or the appropriate character set.
Dimensions with foot WxHxD (cm)
Dimensions without foot WxHxD (cm)
53,8x53,9x25,7
53,8x53,9x7,7
53,8x53,9x25,7
53,8x53,9x7,7
50,0x53,9x25,7
50,0x53,9x7,3
Image format4:34:34:34:3
Image diagonal (cm)51515151
Pixel format640 x 480640 x 480640 x 480640 x 480
Contrast ratio500:1500:1500:1500:1
Angle of viewing horizontal/vertical176°176°176°176°
Weight with foot (kg)
Weight without foot (kg)
9,9
8,5
9,9
8,5
9,8
8,4
Power consumption (Watt) IEC 6208752565256
Power standby (Watt)2,82,82,82,8
General
Ambient temperature 0º – 40º Celsius
Chassis name L 2100 / L 2110 (DVB-T)
Power supply 230 V +15/–20% / 45-65 Hz
Tuner VHF/UHF/cable
Hyper band 8 MHz 41 MHz to 860 MHz
Station slot memory 200
TV standards B/G, I, L, D/K
DVB-T
Colour standard SECAM, PAL,
NTSC-V, PAL-V (60Hz)
Sound standard mono/stereo/2-sound
Nicam B/G, I, L
Dolby Virtual
Rated audio power 2 x 2 Watt
Teletext Level 1.5
FM-Tuner 87,5 – 108 MHz
Connections
Jack 3.5mm Headphones 32–2000 Ohm
Mini-DIN (AVS) Video IN Y/C (S-VHS / Hi 8)
Cinch (yellow) Video IN CVBS (VHS/8 mm)
2 x Cinch (white/red) Audio IN L / R
2 x Cinch (white/red) Audio OUT (level adjustable) L / R
EURO AV 1 Video IN Y/C (S-VHS / Hi 8)
CVBS (VHS/8 mm), RGB)
Video OUT CVBS
Audio IN L / R
Audio OUT L / R
EURO AV 2
CVBS (VHS/8 mm)
Video OUT CVBS
(1
DVB-T
(1
DVB-T antenna output
(2
Video IN Y/C (S-VHS / Hi 8)
Audio IN L / R
(1
only for DVB-T models.
(2
AV2 is not available in DVB-T models.
Audio OUT L / R
Downloaded From TV-Manual.com Manuals
50,0x53,9x25,7
50,0x53,9x7,3
9,8
8,4
25 -
Accessories
Stand
Use the Flat-TV F-Stand 2 , Loewe order no. 63495A00.
Wall holder
Use the wall holder WM35, Loewe order no. 65495A00.
VESA adapter
The VESA adapter offers you the possibility of also using your TV set for other
VESA-compatible fastening devices.
Loewe order no. 89691A00
Note: Please only use the original LOEWE VESA adapter for your TV set and use
the VESA-compatible fastening devices recommended by LOEWE.
Loewe DVD players and recorders
The DVD players and recorders from Loewe are characterized by form and colour
which match Loewe TV sets, adapted user guidance and technology. A combination of the two devices forms a system which offers many advantages.
Subject to delivery options.
Downloaded From TV-Manual.com Manuals
- 26
Service
Loewe Austria GmbH
Parkring 10
1010 Wien, Österreich
Tel.: +43 - 810/0810-24 (zum Ortstarif)
E-Mail loewe@loewe.co.at