Page 1
Audiodesign
Loewe klang 5 subwoofer
Operating manual
Page 2
Page 3
Loewe klang 5 subwoofer
Operating manual
Table of contents
Table of contents .......................................................................................3
Welcome! .....................................................................................................4
Delivery specification ................................................................................4
For your safety ............................................................................................ 5
Cleaning ...................................................................................................... 5
Mounting the cable holding-down device ...............................................6
Connectors and operating controls ......................................................... 7
Configuration examples ............................................................................ 8
Connector/set-up solution with one subwoofer (2.1 system) ................................8
Connection/set-up solution with two subwoofers
via WIRELESS DIGITAL AUDIO LINK (5.2 system) .................................................. 8
Connection/set-up solution with two subwoofers
via DIGITAL AUDIO LINK and LOEWE KLANG LINK (5.2 system) ......................... 9
Connecting Subwoofer via Digital Audio Link ...................................... 10
Connecting Subwoofer via LINE IN ........................................................ 11
Settings directly on the Subwoofer ....................................................... 12
Settings via control buttons ........................................................................................12
Pairing with Loewe klang link ................................................................. 14
Configuration of the subwoofer via Digital Audio Link ....................... 14
Configuration of the subwoofer via LINE IN ......................................... 16
Software update ........................................................................................17
english
Specifications........................................................................................... 18
Disposal ..................................................................................................... 18
Conformity / Manufacturer’s declaration ............................................ 18
Legal details .............................................................................................. 18
3
Page 4
Loewe klang 5 subwoofer
Operating manual
Welcome!
Delivery specification
Thank you
for choosing a Loewe product! We are happy to have you as a customer.
Loewe stands for the highest standards of technology, design and ease of operation. This applies equally to TV, DVD/Blu-ray, audio and accessories.
Neither technology nor design is an end in itself, but both are intended to provide our customers with the best possible audio and visual experience.
Our design is not influenced by short-term, fashionable trends. You have, after all, purchased a high-quality piece of equipment which you do not want to tire of
tomorrow or the day after.
The Loewe klang 5 subwoofer is designed for Loewe TV sets and Loewe speaker systems. The device has a powerful bass amplifier and is prepared for wireless operation with the Wireless Digital Audio Link function.
Loewe TV sets with integrated digital multi-channel audio decoder direct the sound signals and information on the set settings via the DIGITAL AUDIO LINK IN connection to the subwoofer. You can conveniently configure the configuration and settings for the klang 5 subwoofer and the connected speakers via the current Loewe
english
TV sets. The connection via DIGITAL AUDIO LINK OUT also offers the possibility to connect a second subwoofer to obtain a balanced and even more powerful bass.
Via an analogue LINE IN connector, you can also use the klang 5 subwoofer for Loewe TV sets without DIGITAL AUDIO LINK connector or other audio sources.
Delivery specification
Loewe klang 5 subwoofer
Mains cable
Digital Audio Link-cable
Cable holding-down device
L- k e y
2x screws Torx T20
Operating manual
4
Page 5
Loewe klang 5 subwoofer
Operating manual
For your safety
Cleaning
For your safety
For your safety, and to avoid unnecessary damage to your unit, please read and
follow the safety instructions below:
The unit is intended exclusively for the playback of audio signals.
Pull the power plug before connecting or disconnecting other devices or
speakers.
Do not operate the unit unattended. In case of longer absence, pull out the
power plug.
The power plug of the TV set must be easily accessible so that the TV can be
disconnected from the power supply at all times.
When unplugging the unit from the mains, pull at the connector body and not
at the cable. The cables in the mains plug could otherwise be damaged and
could cause a short-circuit when plugged in again.
Pull out the power cable during thunderstorms. A voltage surge caused by
lightning conducted through the mains could damage the unit.
Place the unit on a firm, level surface.
Do not set up the unit near strong heat sources or in direct sunlight.
Do not place objects containing liquids on top of the unit.
Candles and other open flames must be kept away from the unit at
all times to prevent the spread of fire.
When installing in a cabinet or closed shelf: leave about 10 cm free
space around the unit to allow the air to circulate freely, thereby avoiding a
build-up of heat and an influence on the sound reproduction.
Under no circumstances, the air supply of the subwoofer may be obstructed.
Make sure it is far enough away (> 10 cm) from the floor or wall.
Lay the speaker and power cables in such a way that they cannot be damaged.
The power cable may not be kinked or laid over sharp edges, not stood on and
not exposed to chemicals; the latter also applies to the system as a whole. A
power cable with damaged insulation can lead to electric shocks and is a fire
risk and must therefore be changed before operation of the set continues.
The speakers generate magnetic dispersion fields which act in the vicinity of
the housing. We recommend a minimum distance of > 0.5 m from magnetically sensitive equipment, such as magnetic data media etc.
If you have moved the unit out of the cold into a warm environment, leave it
switched off for about an hour to avoid condensation forming. Do not switch
the unit on until it has reached room temperature. This prevents serious
damage to the components.
WARNING: To prevent electrical shock, do not open the unit. There are no
parts inside the unit that can be repaired by the user. Repairs should only be
carried out by a Loewe dealer.
Protect the unit from ...
Water, dampness, dripping or sprayed water or steam
Impacts and mechanical stresses
magnetic and electric fields
higher electrical powers than specified
cold, heat, direct sunlight and high temperature fluctuations.
Dust
Covering which obstructs air circulation
Interference with the internal workings of the unit
This device has been built exclusively for private use in domestic environments.
Warranty services cover this intended use.
See the rating plate on the bottom of the set for the precise product designation.
Cleaning
Clean the top side of the subwoofer made of aluminium with a damp, soft and
clean cloth only (without any abrasive cleaning agent).
The housing of the subwoofer is fabric covered. Vacuum the surface regularly
with a soft brush attachment.
In case of dirt or stains:
Moisten a soft, colour-neutral cloth with detergent or normal stain remover and
gently rub away the stain. You can also treat the stain directly with normal dry
stain remover spray (vacuum up powder).
Do not moisten the fabric cover directly with detergent or stain remover (risk of
encrustation). Do not use any solvents to clean the fabric.
Follow the manufacturer‘s instructions when using stain removers.
There is an increased risk of encrustation when cleaning the cloth grills with
nicotine deposits.
english
5
Page 6
Loewe klang 5 subwoofer
Operating manual
Mounting the cable holding-down device
Mounting the cable holding-down device
The cable holding-down device is exclusively used for cable routeing!
It has not been designed as a carrying handle!
The screws of the cable holding-down device must not be screwed into
the thread up to stop without the cable holding-down device!
Exercise due care when handling tools.
Preparing the subwoofer
english
Remove the separate package from the Loewe klang 5 transport box. Lift the
subwoofer out of the box and place the subwoofer with its top side on a soft,
clean surface. You can use the fleece from the packaging material.
Mounting
1. Only screw the two supplied screws into the threads provided so that they
cannot fall off by themselves.
2. Slide the cable holding-down device with its open side from below between
the screw head and the subwoofer.
3. Turn the screws hand-tight using the supplied L-key.
6
Page 7
Loewe klang 5 subwoofer
Operating manual
Connectors and operating controls
Connectors and operating controls
1
2
11
10
3 4
9
5
8
7
english
6
1
220-240 V ~ 50/60 Hz – Mains connection
2
DIGITAL AUDIO LINK IN – Audio input (digital)
3
DIGITAL AUDIO LINK OUT – Audio output (digital)
4
SERVICE – Service interface for internal purposes
5
LINE OUT – LEFT/RIGHT – Audio output left (analogue)
6
LINE IN – LEFT/RIGHT – Audio input left (analogue)
7
MODE – Setting/display of the on/off behaviour of the subwoofer
8
POLARITY – Setting/display of the phasing
9
SUBWOOFER GAIN – Setting/display of the bass intensity
10
SUBWOOFER POSITION – Setting/display of the subwoofer position
11
PAIRING/RESET – Establishing the connection to Loewe klang link (Wireless
Digital Audio Link)
7
Page 8
Loewe klang 5 subwoofer
Operating manual
Configuration examples
Configuration examples
Only one of the given examples is possible at the same time.
Connector/set-up solution with one subwoofer (2.1 system)
When configuring a 2.1 system, the subwoofer is connected to the audio source
either via DIGITAL AUDIO LINK IN or LINE IN. In a 2.1 system, two speakers are
connected to the subwoofer; this applies only to the connection via LINE IN.
TV-set
english
TV speakers as
front speakers L / R
klang 5 subwoofer
DIGITAL AUDIO LINK / LINE IN
DIGITAL AUDIO LINK / LINE IN
An example of TV set with subwoofer
Front
left
Front
left
klang 5 subwoofer
Front
right
LINE IN
klang 5 subwoofer
An example of a 2.1 system
Fron t
right
TV-set
Connection/set-up solution with two subwoofers via WIRELESS
DIGITAL AUDIO LINK (5.2 system)
Your speakers and subwoofers have been already prepared by Loewe for wireless
operation at the factory. The function can be used with the Loewe klang link box.
To do this, connect the box to your TV set using the DIGITAL AUDIO LINK cable.
TV set
klang 5 subwoofer
(2)
Front
left
Front
left
Surround
left
TV speaker
as centre speaker
Loewe klang link
TV speaker
as centre speaker
klang 5 subwoofer
(1)
Surround
right
An example of a 5.2 system
Fron t
right
Front
right
A set-up example of a 2.1 system
How to connect the subwoofer via DIGITAL AUDIO LINK is described on page
10. The connection via LINE IN is described on page 11.
8
klang 5 subwoofer (1)
Surround
left
klang 5 subwoofer (2)
Surround
right
A set-up example of a 5.2 system
How to connect the Loewe klang link box can be found in the instruction manual
supplied with the Loewe klang link box.
Page 9
Loewe klang 5 subwoofer
Operating manual
Configuration examples
Connection/set-up solution with two subwoofers via DIGITAL AUDIO
LINK and LOEWE KLANG LINK (5.2 system)
If you use a 5.2 system with a Loewe klang link box, you can connect the speakers
and subwoofers much more easily and without much effort. This applies also to
other connection/set-up solutions using the Loewe klang link box.
TV set
klang 5 subwoofer
TV speaker
as centre speaker
(1)
english
klang 5 subwoofer
(2)
Surround
left
Front
left
Front
left
Surround
left
Loewe klang link
TV speaker
as centre speaker
DIGITAL AUDIO LINK
klang 5 subwoofer (1)
klang 5 subwoofer (2)
Front
right
Surround
right
An example of a 5.2 system
Fron t
right
Surround
right
A set-up example of a 5.2 system
How to connect the subwoofer via DIGITAL AUDIO LINK is described on page
10.
9
Page 10
Loewe klang 5 subwoofer
Operating manual
Connecting Subwoofer via Digital Audio Link
Connecting Loewe klang 5 subwoofer via Digital Audio Link
Via the DIGITAL AUDIO LINK IN interface, you can digitally connect the klang 5 subwoofer to your TV set
Disconnect all devices from the mains before connecting.
Using the included digital audio link cable, connect the DIGITAL AUDIO LINK interface of the Loewe TV set to the DIGITAL AUDIO LINK IN interface of the klang 5
subwoofer. If you want to connect another klang 5 subwoofer or klang 5 speaker, connect the DIGITAL AUDIO LINK OUT interface of the first subwoofer/speaker to
the DIGITAL AUDIO LINK IN interface of the second subwoofer/speaker.
You can connect the subwoofer to your existing system at any point. After a speaker of the Loewe klang 5 series already integrated via DIGITAL AUDIO LINK, or directly
after your TV set.
Connect the speaker cable to the speaker according to the corresponding installation instructions.
english
Use the mains cable supplied to connect the 220-240 VAC 50/60 Hz socket of the klang 5 subwoofer to a 220-240V 50/60 Hz socket.
DAL cabel
Mains socket
(1
.
DIGITAL AUDIO LINK OUT
TV - set / Subwoofer / Speaker
klang 5 subwoofer
Mains cable
DIGITAL AUDIO LINK IN
Subwoofer 2 / Speaker
(1
Availability and position of the DIGITAL AUDIO LINK interface depends on the type of TV set.
10
DAL cabel
Page 11
Loewe klang 5 subwoofer
Operating manual
Connecting Subwoofer via LINE IN
Connecting Loewe klang 5 subwoofer via LINE IN
Via the LINE IN analogue interface, you can connect the klang 5 subwoofer to your TV set or any audio source.
Disconnect all devices from the mains before connecting.
Connect the analogue audio output AUDIO OUT
use the supplied 3.5mm jack/2 x cinch audio cable. If an audio source is used, which has separate jacks for left/right; use appropriate standard cinch cables.
Connect the speaker of the Loewe klang 5 series that is positioned to the left of your TV set to the white jack (LEFT) of the subwoofer using a cinch cable.
Connect the speaker of the Loewe klang 5 series that is positioned to the right of your TV set to the red jack (RIGHT) of the subwoofer using a cinch cable.
Connect the cables to the speaker according to the corresponding installation instructions.
Use the mains cable supplied to connect the 220-240 VAC 50/60 Hz socket of the klang 5 subwoofer to a 220-240V 50/60 Hz socket.
If the menu item TV speaker is active in the sound components wizard of the Loewe TV set, it may happen that after turning on the TV set, the klang 5 subwoofer
connected to AUDIO OUT is operated at a high volume. Therefore, select in the sound components wizard first the Speaker system (AUDIO OUT)
16) before connecting the subwoofer to the mains.
(1
of the TV set or of another audio source with the LINE IN audio inputs LEFT/RIGHT of the subwoofer. To do so,
TV-set
AUDIO OUT
(1
(see page
english
Mains socket
Audio cable 3.5mm jack / 2x cinch
Mains cable
(1
For Loewe TV sets as of chassis SL3xx and software V2.2.13 without AUDIO OUT connector, use the HEADPHONE connector.
klang 5 subwoofer
Cinch cabel
Cinch cabel
Speaker
Right
Speaker
Left
11
Page 12
Loewe klang 5 subwoofer
Operating manual
Settings directly on the Subwoofer
Settings directly on the klang 5 subwoofer
Before commencing the start-up and settings, please make sure that all cables
are connected correctly.
Status LED
Meaning of the colours of the status LED:
Blue: DIGITAL AUDIO LINK – input active
Yellow: WIRELESS DIGITAL AUDIO LINK – mode active
Green: LINE IN – input active (analogue signal)
White: no signal detected
english
Red: Disorder
Status appears for ca 15 min., then the LED will turn off.
Settings via control buttons
Using several control buttons you can make various settings on the subwoofer.
The corresponding LEDs indicate the status. The LED display switches off after
ca 15 min.; when pressing one of the control buttons, the LEDs turn on again.
The handling of the settings directly on the subwoofer will depend on the connection types of the subwoofer. Depending on whether the subwoofer is connected via DIGITAL AUDIO LINK or LINE IN to the TV or an audio source.
When the subwoofer is connected to a Loewe TV set (chassis SL3xx and higher
versions) via DIGITAL AUDIO LINK, the POLARITY and SUBWOOFER GAIN
settings can only be made via the TV set. A local change on the klang 5 subwoofer will not result in a feedback to the TV set.
When connecting the subwoofer to a TV or any audio source via LINE IN, these
settings must be made directly on the klang 5 subwoofer.
MODE settings
With the MODE button you can set the on/off behaviour of the subwoofer. The
LED indicator ON shows the selected mode. If this LED lights, the ON mode is
active. If no LED lights, AUTO ON/OFF is active.
The setting for MODE will only be made locally on the subwoofer.
Selecting AUTO ON/OFF:
By selecting AUTO ON/OFF, the subwoofer automatically switches on from
standby, when a connected TV set is switched on at the DIGITAL AUDIO LINK
IN or WIRELESS DIGITAL AUDIO LINK connector or when an audio signal is
applied at the cinch jacks LINE IN (LEFT/RIGHT).
If both connectors are simultaneously used (switched on TV set at DIGITAL
AUDIO LINK, audio source signal at LINE IN) DIGITAL AUDIO LINK has priority.
If you switch the TV set at DIGITAL AUDIO LINK to standby mode, the subwoofer
automatically switches to LINE IN.
If the TV set connected to the subwoofer at DIGITAL AUDIO LINK IN is switched
to standby, or an audio signal is not applied at LINE IN, the subwoofer in AUTO
ON/OFF mode will automatically switch off after 10 min (standby mode).
When connected to LINE IN, the subwoofer may be automatically turned on,
if we have interference signals on the audio lines (LINE IN).
When connected to LINE IN, the subwoofer can switch off automatically
during longer, very quiet periods. In this case, increase the volume.
Selecting ON:
When being in mode ON, the subwoofer will automatically switch off after 4
hours (standby mode), on the condition that the TV set connected to the subwoofer at DIGITAL AUDIO LINK or WIRELESS DIGITAL AUDIO LINK is switched
to standby or an audio signal is not applied at LINE IN.
All set values remain unchanged after the subwoofer has been switched on and
off.
12
POLARITY settings
With the POLARITY button you can set the phasing of the subwoofer. The two
LED indicators 0º and 180º indicate the selected setting.
Test both values (0º and 180º) and select the one with which you perceive a
clearer bass reproduction at your listening position.
When connecting the subwoofer via DIGITAL AUDIO LINK, the setting is made
in the sound components wizard (Setting of the subwoofer phase, see page
15) on the TV set.
Page 13
Loewe klang 5 subwoofer
Operating manual
Settings directly on the Subwoofer
Adjusting the SUBWOOFER GAIN
Using the SUBWOOFER GAIN +/-
volume. The three LED indicators -6 dB / 0 dB / +6dB indicate the adjusted
volume.
The adjustment range of -6 dB to +6 dB can be changed in steps of 1 dB. The
corresponding LED will light up for the values -6 dB, 0dB and +6dB. For intermediate values, the LEDs will be dimmed accordingly.
buttons you can adjust the basic bass
When connecting the subwoofer via DIGITAL AUDIO LINK, the subwoofer
volume is set in the sound components wizard (Adjusting the speaker volume,
see page 15) on the TV set.
Setting the SUBWOOFER POSITION
When using the SUBWOOFER POSITION
quency ranges (20 Hz - 50 Hz) for bass reproduction to be raised or lowered. The
three LED indicators CORNER / WALL / FREE indicate the selected setting.
button, you can set the lowest fre-
The setting for SUBWOOFER POSITION will only be made locally on the
subwoofer.
Selecting CORNER:
When the subwoofer is near the corner of the room, select the setting CORNER
(-3 dB).
Selecting WALL:
When the subwoofer is near a wall, select the setting WALL (0 dB).
Selecting FREE:
When the subwoofer is in free space, select the setting FREE (+3 dB).
PAIRING/RESET Setting
To use the function (WIRELESS DIGITAL AUDIO LINK), you need the Loewe
klang link box and a TV set (chassis SL3xx or higher with software V4.1.x or
higher) with a digital audio link connection.
The Loewe klang link box is not included in the set of equipment supplied.
When pressing the PAIRING/RESET button, the subwoofer is ready to be wire-
lessly integrated into an existing system, or to be connected alone to the Loewe
klang link box and the TV set.
Meaning of the LED after pressing the PAIRING/RESET button:
Permanently: The subwoofer has found the Loewe klang link box and is con-
nected to it.
Flashing: The subwoofer has not yet/not found the Loewe klang link box. If
there is still no connection after 1 minute, a new attempt must be
initiated manually.
english
13
Page 14
Loewe klang 5 subwoofer
Operating manual
Pairing with Loewe klang link
Configuration of the subwoofer via Digital Audio Link
Connecting the Loewe klang 5 subwoofer via
Loewe klang link
You cannot use the system in a mixed mode. You must decide between a
wireless or wired connection. Your TV set detects automatically whether it is
connected wirelessly or wired.
The sound components wizard can be opened via System settings –
Connections – Sound components.
Sound playback
english
via ...
Speaker
configuration
Select the Loewe klang Sound system.
OK Confirm selection.
Proceed to next step.
Configuration of the klang 5 subwoofer (DIGITAL
AUDIO LINK/WIRELESS DIGITAL AUDIO LINK)
After switching on the TV set, the sound components wizard detects that a
Loewe klangSound system was connected to DIGITAL AUDIO LINK and automatically displays it in the sound components wizard. A system 3.1 is assumed
as a configuration example.
The sound components wizard can be opened via System settings – Con-
nections – Sound components.
The automatic recognition of the Loewe klang Sound system is
dependent on the Loewe chassis type and the software version used (as of
chassis type SL3xx and software version V4.x). For other types of chassis/
software versions call manually the sound components wizard to select the
Speaker system (DIGITAL AUDIO LINK). The order and appearance of
the menu items can be different from the case described here..
Sound playback
Sound playback
via ...
via ...
Select Pairing
Proceed to next step.
Once you have selected Pairing and aroused the speaker/subwoofer by pressing any button, press the PAIRING button for every Loewe klang 5 speaker/
subwoofer. The speakers/subwoofer and your TV set connect themselves
now automatically. The connected speakers/subwoofer are now shown in the
Linking menu.
Complete linking.
When the pairing has been performed properly, the Loewe klang 5 system can
now be configured via the TV set.
14
Speaker
configuration
Proceed to next step.
The speakers currently found are displayed.
Proceed
TV loudspeakers as centre speaker
.
Page 15
Loewe klang 5 subwoofer
Operating manual
Configuration of the subwoofer via Digital Audio Link
TV loudspeakers
as centre
speaker
Distance to left
front speaker
Select whether you want to use the TV speaker as centre
speaker.
Proceed to Distance to left front speaker.
Set the distance between the left front speaker and your
listening position in 10 cm stepsn.
Measure the distances from your listening position to the
front speakers and the centre speaker (if used). The system
calculates delay times from this for the loudspeaker signals,
so that these reach the listener simultaneously.
Proceed to the respective other speakers (right front
speaker, centre speaker and subwoofer) and also
set distance. The selected speaker will be coloured blue.
After setting the distance to the subwoofer.
Proceed to Adjust speaker level.
Adjust speaker
level
Subwoofer
phase
Adjust the level for the speaker.
Select speakers.
The selected speaker will be coloured blue.
For balanced audio reproduction all speakers should be set
to the same volume level. A noise signal will be reproduced
automatically on each speaker in succession. Adjust every
speaker to equal perceived volume from your listening
position.
After adjustment of the last speaker.
Proceed to Subwoofer phase.
Switch to a station with music or start playing music with a
DVD player.
Test both values (0º and 180º) and select the one with
which you perceive a clearer bass reproduction at your
listening position.
Back: End of wizard.
This ends the sound components wizard for connecting and
setting up a speaker system.
english
15
Page 16
Loewe klang 5 subwoofer
Operating manual
Configuration of the subwoofer via LINE IN
Configuration of the klang 5 subwoofer (LINE IN)
Configure the sound components wizard of the Loewe TV set telling that you
use a klang 5 subwoofer that is connected to AUDIO OUT
set. A system 3.1 is assumed as a configuration example.
When the klang 5 subwoofer is connected to AUDIO OUT
to return to the selection of TV speakers , unplug the power cord of the
subwoofer before you select the TV speakers. At the AUDIO OUT
the audio signal may be output with high volume in the selection of TV
speakers.
english
HOME: Call Home view.
Mark System settings,
OK call System settings.
Select Connections,
go to next column.
Select Sound components,
go to next column.
Sound playback
via...
(1
via LINE IN of the TV
(1
and you want
(1
connector,
Connect
speakers
Select TV speakers + Subwoofer or Subwoofer + ext.
front speakers.
Specify here whether you want to operate the speakers
of the TV set with an additional subwoofer or a subwoofer with external front speakers at the AUDIO OUT socket
of the TV set.
Continue with the appropriate selection
TV speakers + Subwoofer
Adjust
subwoofer level
.
Select Speaker system (AUDIO OUT)
OK Confirm selection.
Proceed to next step.
(1
For TV set types without AUDIO OUT, use the HEADPHONE connector.
16
(1
.
Adjust the volume for the subwoofer.
Back: End of wizard.
This ends the sound components wizard for connecting and
setting up a speaker system.
Page 17
Loewe klang 5 subwoofer
Operating manual
Configuration of the subwoofer via LINE IN
Software update
Subwoofer + ext. front speakers
TV
loudspeakers
as centre
speaker
Select yes, if you want to use the built-in TV speakers as
centrespeakers.
If you select no here, no sound proportions will be trans-
ferred from the TV loudspeakers.
Proceed to next step
Adjust ext.
Speaker level
Software update
Software update via DIGITAL AUDIO LINK
If a new version of the Loewe klang 5 subwoofer software is available during an
update of the TV software, it will also be updated via the DIGITAL AUDIO LINK
interface. For more information on the software update, refer to the instruction
manual of your TV set.
During the update, you must not unplug the subwoofer.
english
.
Adjust
the volume of the external sound system optimally
to the TV volume
.
An audio broadband signal is transmitted via the
AUDIO OUT jack. Therefore, the level of the front
speakers and the subwoofer varies uniformly with the
volume setting.
Back: End of wizard
This ends the sound components wizard for connecting and
setting up a speaker system.
17
Page 18
Loewe klang 5 subwoofer
Operating manual
Specifications
Disposal / Conformity
Specifications
Order No. 56234xxx
Operating temperature [°C] 5 ... 35
Humidity [%] (no condensation) 20... 80
Dimensions [W x H x D in cm] W 32.1 x H 29.4 x D 32.1
Weight [kg] 11.2 kg
english
Digital power stages
Acoustic principle
Speaker equipment
Mains voltage [Volt 50/60 Hz] 220–240
Max. power consumption [Watt] 370
Network standby [Watt] < 0.6
Setting range of intensity [dB] +6/-6
Transmission range (acoustic) 29 Hz–150 Hz (± 3dB)
Maximum sound pressure
Transmission range (electrical)
Connections
Input sensitivity
Filter LINE IN/LINE OUT
Signal detection >1 mV at Line IN
2 x 150 W (sine wave)
2 x 300 W (music)
with passive resonators
1 x 8 inch woofer
2 x 8 inch passive speaker
111 dBA ± 1 dB at 1m
20 Hz–500 Hz
WDAL (wireless)
DAL OUT (RJ45)
LINE IN (CINCH)
LINE OUT (CINCH)
250 mV/20 kOhm
(@ +6 dB Intensity)
Low pass 2nd order 100
Hz High pass 2nd order
closed
distance
DAL IN (RJ45)
100 Hz
Disposal
Cardboard box and packaging
In line with national regulations regarding the disposal of packaging materials,
we pay a fee to authorised recyclers who collect packaging from dealers.
Nevertheless, we recommend that you keep the original cardboard box and
the rest of the packaging materials so that the device can, if necessary, be
transported under the safest possible conditions.
The device
Attention: The EU Directive 2002/96/EC governs the proper
return, handling and recycling of used electronic appliances.
Old electronic devices must therefore be disposed of
separately. Never dispose of this device in normal domestic
waste! You can hand in your old unit free of charge at identified
collection points or to your dealer if you buy a similar new unit.
Additional details about return (also for non EU countries) are
available from your local municipal authority.
Conformity / Manufacturer’s declaration
Loewe Technologies hereby declares that this product meets the
essential requirements and other relevant provisions of Directive
1999/5/EC and all applicable EU directives.
You can find the complete declaration of conformity in the product selection at:
www.loewe.tv/int/my-loewe
Legal details
Loewe Technologies GmbH
Industriestrasse 11
D-96317 Kronach
www.loewe.tv
All rights including translation, technical modifications and errors reserved. The
screen graphic displayed is only an example. Depending on the device type, the
available hardware/software components may be different.
Printed in Germany
Editorial date 01/17-2.0 PS
© Loewe Technologies GmbH, Kronach
Wireless transmission 5.8 GHz
Sound optimization Corner, wall, free standing
18
Loading...