POWER-FIN®GAS BOILER 501, 751, 1001, 1300 MODELS
POWER-FIN
®
BOILER
Submittal Sheet
PB-Sub-10
JOB NAME ______________________________________________________________________
LOCATION ______________________________________________________________________
ARCH./ENGR.____________________________________________________________________
MECH. CONTRACTOR ___________________________________________________________
MODEL NO. _____________________________________________________________________
TYPE GAS ______________________________________________________________________
Btu/hr INPUT_____________________________________Btu/hr OUTPUT_________________
NOTES
Standard Features
• Up to 87% Thermal Efficiency
• Aquastat with Adjustable Differential
• Sequential & Diagnostic Control Panel
• Digital Display with Alarm & Status LEDs
• Radial Ceramic Burner
• Low NOx Operation Exceeds the most
Stringent Air Quality Requirements
• ASME Copper Finned Tube Heat Exchanger
• Gasketless Heat Exchanger Design
• 160 PSI Working Pressure
• Temperature & Pressure Gauge
• Combustion Air Filter
• Hot Surface Ignition
• Adjustable High Limit with Manual Reset
• Down Stream Test Cock
• Zero Clearance to Combustible Materials
• Slide Out Control Panel
• ASME Pressure Relief Valve
• Pump Delay
• Freeze Protection
• Flow Switch
• Small Footprint
• Flame View Port
• 24 Volt Control System
• 10 Year Limited Warranty on Heat Exchanger
(See warranty for details)
Optional Equipment
Place an X in the box by all options that apply
Alarm Bell
Contacts for Air Louvers
Contacts on any Failure
Cupro-Nickel Heat Exchanger
High Gas Pressure Switch
Low Gas Pressure Switch
Indoor/Outdoor Control
Low Water Cut-Off w/ Manual Reset
MP2Sequencer (F9 models only)
Harmony Sequencer (M9 models only)
Vent Diameter Reducer
Firing Control Systems
F=On/Off Fire M=Modulating Fire
F9 HSI (Standard)
M9 Hot Surface Ignition
with Modulation
F/M13 GE GAP/FM/IRI
F/M7 California Code