Sun Saver
Solar
Water Heaters
Standard Features
• Exceeds ASHRAE Energy Standards
• Foam Insulation – Improved formulation provides
uniform tank coverage with a thick blanket of insulating
foam. This non-CFC polyurethane closed cell foam
minimizes standby heat loss and maximizes heat retention.
• Glass-Lined Tank – Fused to the tank at 1600ºF, the
durable glass lining is triple-tested, assuring lasting
protection against rust and corrosion while providing
clean, clear hot water.
• Magnesium Tank Saver – A large diameter anode rod
provides lasting protection from the effects of electrolytic
corrosion.
• Dielectric Nipples – Protect the tank from corrosive action
between dissimilar metals, and reduce installed cost.
• Thermal Isolation – Unique design prevents heat loss
through the bottom of the tank.
• Side Relief Valve Tapping – This provides quicker,
labor-saving installation.
• Pre-Wired Tank Sensor Lead
• Heating Element – 4500 watt immersion type heating
element for heating system back-up.
• Certified at 300 psi test pressure – for 150 psi working
pressure all models .
• Brass Drain Valve
• Warranty - Six year limited tank warranty.
Six year warranty on parts.
(See warranty for details)
Ten year limited tank warranty upgrade also available.