Little Wonder 6232 User Manual

LITTLE WONDER

PARTS LIST, OPERATING AND

ASSEMBLY INSTRUCTIONS FOR

PRO HONDA EDGER, MODEL #6232

6. DON’T OVERREACH OR STAND ON UNSTABLE SUPPORT - Keep good footing and

balance at all times.

7. NEVER DIRECT DIS-

CHARGE OF MATERIAL TOWARD BYSTANDERS OR ALLOW ANYONE NEAR THE AREA OF OPERATION. Use

care in directing discharge to avoid glass enclosures, automobiles, and the like.

8. OBJECTS STRUCK

BY THE BLADE CAN CAUSE SEVERE INJURIES TO PERSON.

The lawn should always be carefully examined and cleared of all objects prior to use.

9. STAYALERT FOR UNEVEN SIDEWALKS, HOLES IN TERRAIN OR OTHER SIMILAR CONDITIONS. Always push slowly over rough

ground.

10. NEVER OPERATE MACHINE WITHOUT GOOD VISIBILITY OR LIGHT.

11. STAYALERT - Watch what you are doing - use

common sense. Do not operate product when fatigued or under the influence of alcohol or drugs.

12. DRESS PROPERLY - Wear safety glasses or goggles. Do not wear loose clothing or jewelry. They can be caught in moving parts. Use of sturdy gloves and safety footwear is recommended. Always wear pants that cover legs.

13. DISCONNECT (UNPLUG) SPARK PLUG LEAD WIRE:

- When not in use.

- Before servicing, cleaning and the like.

- Before changing blade, belt, etc.

14. MAINTAIN PRODUCT WITH CARE Follow maintenance instructions given in Manuals. To reduce the risk of fire, do not allow excessive grass, leaves, or grease to accumulate on the machine.

To avoid injury when using your Honda Edger, follow

basic precautions, including the following:

1. READ THESE IMPORTANT SAFETY INSTRUCTIONS, THE OPERATING INSTRUCTIONS, ASSEMBLY INSTRUCTIONS, USER MAINTENANCE INSTRUCTIONS, AND THE HONDA OPERATING AND MAINTENANCE INSTRUCTIONS CAREFULLY AND COMPLETELY. Be thoroughly familiar with the controls

and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly. SAVE MANUALS AND INSTRUCTIONS AND KEEP IN A SAFE PLACE.

2. ROTATING BLADE

• Keep both hands on handles when blade is rotating.

• Keep feet and hands away from cutting area.

• Do not attempt to remove cut debris or hold material to be cut when engine is running or when blade is moving.

• Make sure spark plug wire is disconnected when clearing jammed material from blade or cutter head.

CAUTION - Blade coasts after machine is turned off.

3. DO NOT USE MACHINE ON GRAVELED SURFACES.

Thrown objects can cause serious injuries and/or property damage.

4. KEEP OPERATING AREACLEAR - Keep the area of operation clear of all persons and pets.

5. USE EDGER PROPERLY - Use only for edging the type of shrub, growth and the like described in the operating instructions. Do not abuse machine. Do not use in rain or wet locations.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

▲

DANGER

▲

WARNING

▲

DANGER

▲

DANGER

▲

The engine exhaust from this product contains chemicals known to the

State of California to cause cancer, birth defects or other reproductive harm.

Warning:

▲

15. STORE MACHINE INDOORS - When not in use, store indoors in a dry place, locked or otherwise inaccessible to children.

16. DO NOT ATTEMPT TO REPAIR MACHINE

- Have repairs made by qualified dealer or repairman. Use only original Little Wonder replacement parts.

17. HANDLE GAS WITH CARE; IT IS HIGHLY FLAMMABLE.

a) Use a gas container acceptable for the purpose and do not store gas in the house. b) Never add gas to a running or hot engine. c) Fill gas tank outdoors with extreme care. Never fill gas tank indoors. d) Replace gas cap securely. e) If gas is spilled, move Edger and gas container from area and do not create a source of ignition.

18. To reduce the risk of fire, replace gasoline cap securely.

19. START THE ENGINE CAREFULLY. Keep hands, feet, clothing and the like well away from blade and moving parts.

20. NEVER ATTEMPT TO MAKE ADJUSTMENTS while the engine is running, except to the

carburetor.

21. DO NOT RUN THE ENGINE INDOORS -

Exhaust flames are dangerous The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

22. IF BLADE STRIKES A FOREIGN OBJECT, FOLLOW THESE STEPS:

a) Stop the engine. b) Disconnect the spark plug lead. c) Inspect for any damage. d) Repair any damage before restarting and operating the machine.

23. DISENGAGE THE BLADE AND/OR STOP THE ENGINE WHEN THE MACHINE IS TRANSPORTED OR NOT IN USE.

CAUTION

▲

WARNING

▲

24. STOPTHE ENGINE WHEN LEAVING THE MACHINE UNATTENDED.

25. WHEN CLEANING, REPAIRING, OR INSPECTING, make certain the blade and all mov-

ing parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug so that unintentional starting does not occur.

26. NEVER OPERATE THE MACHINE without guards or other productive devices in place. Before each use, check all fasteners and safety devices for proper function.

27. MULTIPLE OPERATORS - Keep a safe distance between two or more operators when working together simultaneously.

28. BE SURE MACHINE IS FULLY ASSEMBLED - Never operate without all guards

and deflectors in place. Ensure that all nuts, bolts, screws are installed and properly tightened. Check pulley set screws and all fasteners for tightness and lubricate cutter head shaft, key, keyway and bushings with light oil prior to each use.

29. ALWAYS KEEP THE THROTTLE IN THE “STOP” POSITION WHEN NOT IN USE.

30. LABELS SHOULD BE INSPECTED BEFORE EACH USE. Replace damaged labels

immediately. See Safety Decal Identification on page 4.

SAFETY DECAL IDENTIFICATION

Key #87 P/N 210

Key #84 P/N 4036

Key #85 P/N 211

Key #86 P/N 260

6232

+ 8 hidden pages