Little Giant TE-7-MD-HC User Manual

TE-7-MD-HC

Features

n Thermally protected, totally enclosed, fan

cooled, capacitor start motor

n Ball bearings

n Conduit box (must be field wired —

cord not included)

n Specific gravity to 1.1

n Fluid temperature to 200°F

Magnetic Drive

n Ambient air temperature to 77°F

n Run-dry capability up to 8 hours

NOTE: Consult your local distributor or the

factory for applications with higher ambient
temperatures, specific gravities and viscosities.

Construction

n Volute — Glass-filled Ryton

n Housing — Glass-filled Ryton

n Impeller — Glass-filled Ryton

n Shaft — Ceramic

n Thrust Washers — Ceramic

n O-Ring — Viton

®

®

®

®

w/carbon bushing

The Little Giant MD-HC series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersible
use. Volute, magnet housing and impeller are glass-filled Ryton® for excellent chemical resistance. Ceramic shaft
and thrust washers are 99.5% pure alumina for excellent wear and trouble-free service. Pumping heads are easily
rotated, cleaned or serviced. Spindle shaft is supported at both ends to prevent impeller damage during start-up and
stop of pump.

TE-7-MD-HC

NOTE: Designs and dimensions may vary for various reasons (i.e. type of motor). This information should be used as

general guide rather than an unqualified guarantee. Specifications are subject to change without prior notice.

Specifications

Model

No.

TE-7-MD-HC 587010 1-1/2" FNPT 1" MNPT UR/C-CSA 3/4 115 50/60 10.4/11.8 1080/1230 53 46.7 40 30.8 21.6 58.9 25.5 N/A 40.00

TE-7-MD-HC 587040 1-1/2" FNPT 1" MNPT UR/C-CSA 3/4 230 50/60 2.4/2.9 1080/1230 53 46.7 40 30.8 21.6 58.9 25.5 N/A 40.00

3 Phase 460 50/60 1.2/1.45 1080/1230

TE-7-MD-HC 587103 1-1/2" FNPT 1" MNPT Pump Head Less Motor 8.00

Item

No.

Intake

Size

Discharge

Size Listing(s) HP Volts Hertz Amps Watts

230 50/60 5.2/5.9 1080/1230

Performance (GPM @ Head) Shut Off

Power

Cord (ft.)

Weight

(lbs.)1' 10' 25' 40' 50' Feet PSI

Replacement Parts

ITEM PART NO. DESCRIPTION

A 187005 Volute
B 187085 Thrust washer
C 187056 Shaft
D 187172 Impeller/Bushing
E 924016 O-ring
F 187023 Backplate
1 903712 Bolt
2 921050 Washer
3 187121 Drive magnet
4 187073 Magnet housing

NOTE: Parts A–F contact fluid

PO Box 12010 • Oklahoma City, OK 73157

Phone: [phone] • Fax: [phone]

E-mail: [e-mail]

Form 995786 — 03/2003www.LittleGiantPump.com