3-Phase, 10-Slot Power Supply System
STARTUP GUIDE
PF-2223-1-ST-02 Page 1 of 10 July 2015
STARTUP GUIDE
PF-2123-2, PF-2223-1
10-Slot Power Supply System
© 2015 Copyright Lite-On Technology Corporation ALL RIGHTS RESERVED. Lite-On is a trademark of Lite-On Technology Corporation, registered in
the United States and other countries. This document may contain inaccuracies and typographical errors. Lite-On cannot be held responsible for
any errors or omissions contained in this document. All content is provided “As Is” and “As Available”. Lite-On reserves the right to correct errors
or omissions in this document. Other brand names mentioned herein are for identification purposes only and may be the trademarks of their
respective holder(s). Specifications and data are subject to change without notice.
Contents
Introduction ...................................................................................................................................................... 3
General Safety .................................................................................................................................................. 3
Required Tools for Startup ............................................................................................................................... 4
Startup Checklist ............................................................................................................................................... 4
Initial Power Activation .................................................................................................................................... 5
Shelf Power Activation...................................................................................................................................... 7
C13 Voltage Tests ............................................................................................................................................. 7
Installing Power Supply Units ........................................................................................................................... 8
Related Documentation .................................................................................................................................... 9
PF-2223-1-ST-02 Page 2 of 10 July 2015
STARTUP GUIDE
PF-2123-2, PF-2223-1
10-Slot Power Supply System
3-phase Input Power Configuration
Model Number
Indicates highly-dangerous consequences such as fire, serious injury, or death when
failing to comply with the instructions.
Indicates dangerous consequences such as moderate injury or equipment damage when
failing to comply with the instructions.
Introduction
The 3-Phase Power Supply System is a 10-slot chassis with 2.5KW Power Supply Units (PSUs) that provides
stable DC output power. This 21-inch power system uses up to 10 high-power, hot-swappable PSUs for
flexibility in full power or redundant operation.
There are different models of the 10-Slot Power Supply System depending on output power requirements
and input power configuration as shown in the table below.
PF-2223-1L1N – 10 slot single input
Line-to-Line 4-Wire System
Line-to-Neutral 5-Wire System
The 2.5kW PSUs efficiently supply both main output DC power and standby DC power from either AC or DC
sources. These compact PSUs provide 2.5kW, 12.5V / 200A for main power output and 30W, 12V / 2.5A for
standby power applications. In addition, they support PMBUS 1.2 with boot loader, LED status indicators,
and circuit protection features. For more information about the 2.5kW PSU, refer to the Lite-On 2.5kW
Power Supply Unit Datasheet.
This startup guide provides instructions to startup the 10-Slot Power Supply System for the first time. It
assumes that the 10-Slot Power Supply System has been properly installed and is ready for initial power up
and testing. Refer to Lite-On 3-Phase 22.5kW Power Supply System User Guide for installation instructions.
PF-2123-2LNN – 5+5 slot single input
PF-2223-1LDN – 10 slot dual input
PF-2223-1L1M – 10 slot single input
PF-2123-2LNM – 5+5 slot single input
PF-2223-1LDM – 10 slot dual input
General Safety
This startup guide uses the safety conventions described below. Ensure that you follow the safety
instructions in this guide and observe its directives to protect you from injury and to protect your
equipment from damage.
WARNING
Caution
PF-2223-1-ST-02 Page 3 of 10 July 2015
Loading...