Linksys WPC600N User Manual
Installation1�
INSTRUCTIONS FOR
WINDOWS VISTA™
USERS ONLY
Package Contents
Dual Band Wireless-N Notebook
•
Adapter
Setup Wizard CD-ROM
•
User Guide on CD-ROM
•
Quick Installation
•
Model No: WPC600N
QUICK INSTALLATION
Dual Band Wireless-N
Notebook Adapter
The Notebook Adapter is installed and set up using the Setup Wizard that
is on the enclosed Setup Wizard CD.
This Quick Installation is for Windows Vista users only. If you have Windows
XP or 2000, use the other enclosed Quick Installation.
IMPORTANT: Do not install the Adapter in your PC until you are
instructed to do so or the Adapter will not install correctly.
Insert the Setup Wizard CD into
A.
your CD-ROM drive.
NOTE: Windows Vista or other personal rewalls may ask for
permission to run the software or program. You will need to allow
the software to run in order to continue.
The Welcome screen appears on
B.
your monitor.
Click the Click Here to Start
button.
Read the License Agreement
C.
and click Next to continue the
installation.
Find an available CardBus slot on
D.
your notebook PC.
With the connector pin end facing
the CardBus slot and the label
facing up, slide the Adapter into the
CardBus slot until it locks in place.
Click Next.
After you install the Adapter
E.
correctly, the Congratulations
screen appears. (It may take a
moment for the screen to appear.)
Click Finish.
The first Windows Vista Wireless
F.
Network Configuration utility
screen appears. Select your
network, then click Connect.
If your network has no wireless
G.
security, this screen appears. If your
network has wireless security, go to
step H.
To continue to your unsecured
network, click Connect Anyway
and go to step I.
If your network has wireless
H.
security, this screen appears. Enter
the security key or passphrase (also
known as pre-shared key or WEP
key, depending on your type of
security).
Click Connect.
This screen appears while the
I.
Adapter connects to your network.
Do not cancel, unless you want to
end the installation.
This screen appears when you are
J.
connected to your network.
Select Save this Network, if you
want to save your settings.
Click Close.
The Network Location screen may
K.
appear to help apply the correct
settings for your type of location. If
it doesn’t appear, go to step M.
Select from Home, Work, or Public
location.
This screen varies according to the
L.
selected location.
Click Close.
The Windows Vista Wireless
M.
Network Configuration utility
appears on your desktop’s system
tray.
You can use this utility to configure
or change your wireless settings.
NOTE: For help with the Windows Vista Wireless Network
Configuration utility, refer to Windows Vista Help and Support, by
clicking Vista’s Start button > Help and Support.
Installation is complete!
For additional information or troubleshooting help, refer to the User Guide on the CD-ROM.
Additional support is also available via e-mail or by phone.
24-Hour Technical Support
800-326-7114 (toll-free from US or Canada)
E-mail Support
support@linksys.com
Website
http://www.linksys.com
http://support.linksys.com
Linksys is a registered trademark or trademark of Cisco Systems, Inc.
and/or its affiliates in the U.S. and certain other countries. Copyright
© 2007 Cisco Systems, Inc. All rights reserved. Other brands and
product names are trademarks or registered trademarks of their
respective holders.
70402110NC-BW
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Loading...