Linksys LGS124P User manual

The

Linksys

24-Port Gigabit PoE Switch, LGS124P is an unmanaged 24-port switch with Power

over Ethernet (PoE) that offers a quick and easy solution to extend your office network
with plug-and-play installation. With built-in PoE+, networking devices such as network
hubs, IP phones and IP cameras can be located anywhere without the need for AC
outlets. There's also a built-in full-duplex 10/100/1000 Switch to connect your wired
Ethernet devices together at up to gigabit speeds.

Fast and convenient access to your file

The LGS124P switch offers Gigabit speeds to minimizing your transfer times and
greatly enhancing your ability to stream high-bandwidth files to connected devices
without interference.

Easy to configure and operate

Convenient quick and easy set up with plug-and-play installation.

Port Speed 10/100/1000 Mbps

Protocol IEEE 802.3, 802.3u, 802.3x,

802.3ab, 802.3az

PoE IEEE 802.3af and IEEE 802.3at

Dedicated PoE Power Budget

(Entire switch)

120 Watts

PoE Ports 12 Ports (1-6, 13-18)

Real deliver power budget 110 Watts

Max PoE LED (85% total budget) On over 95 Watts

Off low 95 Watts

QoS 802.1p and DSCP

Jumbo Frame Support Yes

LEDs System

LED

Blue

Link/Act/GB Green Amber

Getting to know the Linksys 24-Port Gigabit PoE
Switch, LGS124P

PoE Max Amber

PoE Green

Dimensions 440 x 200 x 44 mm

Weight 2.76 kg

Power 100 V-240 V 50/60 HZ Internal

Mountable Rack

Environmental Temperature

Operating 0°C~ 50°C (32°F ~

122°F)

Storing -40°C ~ 70°C (-40°F

~ 158°F)

Humidity

Operating 10 ~ 90% (non-

condensing)

Storing 10 ~ 90% (non-

condensing)