Linksys LGS108P, LGS116, LGS116P, LGS124, LGS124P Quick Installation Manual

Package Content

-

LGS108P/ LGS116/

LGS116P/ LGS124/

LGS124P

Gigabit Switch

-Power

Adapter

(LGS108P,

LGS116,

LGS116P)

-Power

cord (LGS124, LGS124P)

Product Overview

-Quick

Installation Guide

- 4 x Foot Pads

-Wall-Mount

kits(LGS108P,

LGS116,

LGS116P)

-Rack-Mount

Kits (LGS124, LGS124P)

~

-

~l~~~

-

~

. . . . . . . . - - .

~

- .

.....

..

-

~~

LED definition

1.

System LED (Blue) The LED lights up and solid when

the

Switch

is power on

2. LINK/ACT/GB (Green) Each LED lights up when a

1Gbps

connection is detected.

It

flashes when

the

corresponding

port

is passing

traffic.

3.

LINK/ACT/GB (Amber) Each LED

lights

up when a

10M/100Mbps

connection is detected.

It

flashes

when

the

corresponding

port

is passing

traffic.

4. POE (Green) Each LED lights up when

the

port

deliveries

power

to

the

attached

device.

5.

PoE

MAX(Amber) For PoE SKUs,

the

LED lights

up

and solid when

the

delivered power exceeding

85%

total

PoE

budget.

Install Your Switch

1

2

Plug in

the

included

power

adapter

to

power

on

the

switch.

Use an

Ethernet

cable

to

connect your

switch

to

the

router.

Switch

3

Use an Ethernet cable

to

connect each additional device.

Specifications

Item

Specification

Model

LGS108P, LGS116, LGS116P,

LGS124, LGS124P

Standards

IEEE802

.3,

802.3u, 802.3x,

802.3ab

Ports

8/16/24 RJ-

45

10/100/1000Mbps

ports

Cabling Type

CatS

or

better

Ethernet Cable

System LED(Biue)*1

LEOs

LINK/ACT(Green/Amber) *

8/16/24

PoE

MAX(Amber) (LGS108P/LGS116P/LGS124P)

PoE(Green)

*4/8/12(LGS108P/LG

S116P/LGS

124P)

LGS108P: 210 x 104 x 25

mm(WxDx

H)

Dimensions

LGS116/LGS116P: 280 x 120 x 25

mm(WxDxH)

LGS124/LGS124P: 440 x 200 x 44

mm(WxDx

H)

Unit Weight

LGS108P: 900g,

LGS116: 1.7kg

, LGS116P:

2.0kg

,

LGS124

: 1.9kg, LGS124P : 2.5kg

LGS108P

: DC

54V/1.2A,

LGS116: DC

12V/1A

Power

LGS116P: DC

54V/1.66A

LGS124/LGS124P: 100-240VAC,

50-

60Hz

, internal

Certification

FCC Class A,CE Class A

Operating Temperature

32

to

122

°F(Oto 50°

C)

Storage Temperature

-40

to

158

oF(-40

to 70°

C)

Operating Humidity

10

to

90%

, non-condensing

Storage Humidity

10

to

90%

, non-condensing

Regulatory Information

Class A Products

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELEC­TROMAGNETIC COMPATIBILITY

We, LINKSYS of 131 Theory, Irvine, CA 92617, declare under our sole
responsability that the products to which this declaration relates, comply with Part
15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

This product has been tested and complies with the specifications for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used according to the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which is found by turning the
equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment or devices

• Connect the equipment to an outlet other than the receiver’s

• Consult a dealer or an experienced radio/TV technician for assistance
FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to operate this
equipment.

Mexico Regulatory Statement

La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es
posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este
equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda
causar su operación no deseada.

EAC Mark of Conformity for Russia, Kazakhstan and
Belarus