Linear AV2500, AV3500, AV5500, AV4500, ZX5800 Owner's Manual

...
IMPORTANT SAFETY INSTRUCTIONS
CENTRAL CLEANING
SYSTEM INSTALLATION
INSTRUCTIONS
When using an electrical appliance, basic precautions
should always be followed, including the following:
READ ALL INSTRUCTIONS CAREFULLY
WARNING - To reduce the risk of fire, electrical shock or injury:
1. Electric shock could occur if system is operated on wet surfaces.
2. Do not allow to be used as a toy. Close attention is necessary when used by children.
3. Use only as described in this manual. Use only manufacturer's recommended attachments.
4. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
5. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
6. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
7. Do not use without dust bag and/or filters in place.
8. Turn off all controls before unplugging.
9. Use extra care when cleaning stairs.
10. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present.
11. Always turn off this appliance before connecting motorized nozzle or brush.
12. Connect to properly grounded outlet only.
13. A current-carrying hose contains electrical wires. Do not use the hose if it is damaged, cut, or punctured. Avoid picking up sharp objects with the hose.
1 of 17
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
TYPICAL VACUUM SYSTEM INSTALLATION
2 of 17
3 of 17
POWER UNIT INSTALLATION
ILLUSTRATION ABOVE SHOWS A TYPICAL AIR VAC UNIT
POWER UNIT INSTALLATION
1.0 POWER UNIT LOCATION AND CONNECTION
The Vacuum System Power Unit is normally placed in the garage (best location), utility room, or basement. Attic locations should be avoided (A) if canister is difficult for the user to service, (B) where temperature exceeds 140 degrees. The Power Unit should be located out of traffic while still accessible for emptying of dirt canister.
2.0 POWER UNIT MOUNTING
For the AV series vacuum the top of the power unit must be a minimum of 18" from the ceiling and 18" from the corner walls. For the FX/ZX series the bottom of the power unit must be a minimum of 18" from the floor and 18" from the corner walls. This clearance is necessary to allow adequate air flow to cool motors. If exhaust is used, refer to Figure 1.
Model Exhaust
Side
AV2500 R 14 16 2.8 4 8 23 24 38 18 AV3500 R 14 16 2.8 4 8 23 24 38 18 AV4500 R 14 16 2.8 4 8 23 24 38 18 AV5500 R 14 16 2.8 4 8 23 24 38 18 FX2000 L 14 16 8.9 4 7 4 28 30 18 FX3000 L 14 16 8.9 4 7 4 28 30 18
FX900 L 14168.94 7 4 283018 ZX5800 L 14 16 8.9 4 7 4 28 31 18 ZX6000 L 14 16 8.9 4 7 4 28 31 18 ZX7000 L 14 16 8.9 4 7 4 28 31 18 ZX8000 L 14 16 8.9 4 7 4 28 31 18
ABCDFG
H
IJ
Note: Dimensions above are in inches
4 of 17
Figure 1
5 of 17
Loading...
+ 6 hidden pages