Linear WTWSKIT User Manual

Replacement Paddle Instructions

WTWSKIT

The kit includes a snap-on replacement
switch paddle and a decorator wall plate with
two mounting screws.

1. Using a small screwdriver, pry up on the edges
to remove the existing paddle from the switch.

2. Align the replacement paddle over the switch
being sure to align the status indicator light
pipe on the paddle with the light pipe slot on
the switch.

3. Snap the replacement paddle securely onto
the switch.

4. Attach the wall plate to the switch with the two
screws provided.

PRY HERE

SNAP NEW PADDLE

ONTO SWITCH

PRY UP EDGES

TO REMOVE

OLD PADDLE

PRY HERE

STATUS
INDICATOR
LIGHT PIPE

USA & Canada [phone] & [phone]

[phone] - Toll Free FAX [phone]

www.linearcorp.com

LIGHT PIPE

SLOT

P1924 X3