Linear Vi2301 Specsheet

Ethernet Extenders
Vi2301
MaxiiCopper High-Speed Ethernet Extender over UTP
Features
• Extends Ethernet beyond 328 feet (100 m) limitation up to 3,000 feet (914 m) over UTP cables.
• Saves additional networking equipment costs and reduces installation time.
• Extended Pass Through PoE (EPTP™) compatible with 802.3af and 802.3at Power over Ethernet (PoE).
• Mega-Pixel Certified (MPC™) High data rate, ideal for high bandwidth requirements of Mega-pixel cameras, multiple IP cameras systems and cameras requiring Jumbo Frame transmission.
• Symmetric Bandwidth (SBW™) provides consistent upload and download with Virtual Zero Packet Loss (VZPL™).
• Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards.
• Supports one pair or four-pair UTP wires with built-in transceiver cable connectivity tester.
• Type tested for -40°C to +75°C temperature range under conforming to NEMA-TS2 testing standards.
• Data rate selectable to for maximum bandwidth utilization
• Complies to major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPS.
• USA designed and manufactured.
• Limited Life Time Warranty.
Applications
• Extending Ethernet distances beyond Ethernet 100 m limit
• Retrofit UTP analog CCTV installations into Digital systems
• Extending Networks in industrial environment
TM
Vigitron’s MaxiiCopper™ Vi2301 UTP Ethernet extender brings new performance standards to the growing need for high speed transmis­sion of full bandwidth Ethernet and PoE power over extended distances. Its unique Symmetric Bandwidth(SBW™) assures full bandwidth transmission is maintained over the entire operational distance for both uploads and downloads with Virtual Zero Packet Loss (VZPL™). Bandwidth assurance provides the ability to transmit multiple cameras on single camera runs with no information loss. It can use one pair or 4 pairs of UTP.
Extended Pass Through PoE (EPTP™) eliminates the need for additional remote site power while allowing a single PoE source, such as a PoE network switch, to provide power to both transceivers and the camera. This feature eliminates the need for local and remote site power supplies. Type tested under NEMA-TS2 environmental standards for extended temperature operation between -40C° to +75C°, the Vi2301 is the perfect solution for extended distance data and power transmission for warehouses, parking lots, campuses, casinos, and many more. MaxiiCopper’s Vi2301 is low power and easily fits inside most cameras housing and junction boxes. Best of all, the Vi2301 is MegaPixel Certified (MPC™), type tested to network packet performance standards, and major camera brand compatibility tested to assure you error free and reliable operations. The Vi2300 series is available in single, four, eight and sixteen channel combinations to meet every system application requirement.
Installation cost savings, proven performance, and major camera brand compatibility all go into making Vigitron’s MaxiiCopper™ Vi2301 your best choice for extended distance data and power transmission.
Application Diagram
Up to 3,000 ft./914 m Cat-5
Cat-5
Vi2301
IP Camera
NVR
Data
Network Switch
Cat-5
Vi2301
RoHS
The Smart Choice for Transmission Solutions www.vigitron.com
DSVi2301_0212
Technical Specification
Electrical
Ethernet Interface Standard 10/100BaseT
Data Rate Dip switch selectable 10/100 Mb/s Full speed / full duplex at maximum rated distance
2
UTP 100 Ohm +/- 20%, Cat5 or better 10BaseT: up to 3,000 ft. (914 m) 100BaseT: up to 2,100 ft. (640 m)
Power Supply 12 VDC, 24 VAC, POE af/at @150 mA maximum
1.5 W with external power supply
2.5 W using PoE
Status LEDs Power On Standard Ethernet: Traffic, Link Extended Ethernet: Traffic, 10/100BaseT
Connectors Ethernet Interface: RJ-45 Connector Extended Interface: RJ-45 Connector Power: IEC380-8 inlet
RFC 2544 TCP/IP Packet Transmission
Compatible with IEEE 802.3af PoE, IEEE 802.3at PoE
RFC 768 UDP, 2068 HTTP, 793 TCP 791 IP, 1783 TFTP, 894 IP over Ethernet
PoE Compatibility IEEE 802.3af, IEEE 802.3at
Jumbo Frame Support Yes
5
1
Ordering Information
PART No.
Vi2301 Single port UTP Ethernet Extender
Vi2304 4-port UTP Ethernet Extender
Vi2308 8-port UTP Ethernet Extender, 19”, 1U
Vi2316 16-port UTP Ethernet Extender,
Vi0012 12 VDC Wall-mount Power Supply
System Configuration
Vi2301
Description
3,000 ft.
914 m
19”, 1U
Regulatory
FCC Part 15, Subpart B, Class B 2010
Emissions EN 5502:2006+A1:2007
EN 61000-3-2:2006+A1:2009+A2:2009 EN 61000-3-3:2008 EN 55024:1998+A1:2001+A2:2003
Safety CE, UL
Environmental RoHS
Environmental
Humidity 0 to 95%, non-condensing
Temperature Operating: -40°C to +75°C per NEMA-TS2 testing
Storage: -40°C to +85°C
Mechanical
Dimensions 1.15x1.6x3.73 in., 3.0x4.0x9.5 cm (HxWxL)
Weight 0.212 lb, 96 g
Material Extruded Aluminum
Accessories
12 VDC wall-mount power supply (optional)
3.73"
9.5 cm
Vi2301
1-Pair
(Data only)
2, 4
Data and PoE Distance
3
Data Rate
10BaseT
100BaseT
1. Specifications subject to change without notice.
2. Distance figures are obtained using in house testing mirroring installations. Factors
such as cabling, connections, use of power and environmental conditions may affect actual distances and should be taken into consideration.
3. Specifications reflect operating using Pass Through PoE (PTP™) providing power for both transceivers and camera from a single source. Distances may increase if transceivers are locally powered.
4. System can be powered for 802.3af using PTP™ reference used is Class 2.
5. The 802.3at operation requires PSE to run in forced mode.
4-Pair
(Data + PoE class 2)
n/a
2,100 ft. (636 m)
3,000 ft. (914 m)
1,000 ft. (303 m)
Extended
Ethernet
10/100
Left View
Traffic
Off:10BaseT
S1
{
On:100BaseT Off:Slave
S2
{
On:Master Off:4-Pairs
S3
{
On:1-Pair
S1 S2 S3
High Speed Ethernet Extender
1.15"
Off
3 cm
On
Power
Top View
Vi2301
over UTP
www.vigitron.com
1.6" 4 cm
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205 13906 Sparren Ave. San Diego, CA 92129, USA • info@vigitron.com • www.vigitron.com
12V /24V
Right View
10/100Base-T
Traffic
Link
Made in U.S.A.
© Copyright 2012 Vigitron, Inc.
Loading...