Linear VB1005F, VB1005M Specsheet

VB1005F / VB1005M
Tool-less Twisted Pair Video Baluns
Features
• Quality video over 750 ft. (228 m) of unshielded twisted pair wires (UTP)
• Up to 3,000 ft. (915 m) with Vigitron Active Receivers
• NTSC, PAL and SECAM video formats
• Support for "up-the-coax" type signals
• No power required
• 60 dB crosstalk and noise immunity
• Compact size and easy to install
• Compatible with all qualified UTP cameras
• Limited lifetime warranty
Applications
• Security and surveillance
• Elevator surveillance
• Casino security
• Hospitals and airports
• School campuses
The Vigitron VB1005F and VB1005M are passive transmission devices that transport video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 ft. (328 m). Distances up to 3,000 ft. (915 m) can be achieved when it is used with Vigitron Active Receivers. They use Category 2-7 twisted pair wires, are easy to install and cost effective, and do not require power. The VB005F and VB1005M's unique and compact design allows mounting directly to the video source or receiver without needing any additional cabling. They are compatible with all qualified cameras with built-in twisted pair transmitter.
The VB1005F and VB1005M are equipped with tool-less connectors to expedite installation. Their crosstalk and noise immunity ensure quality video signals. The VB1001F and VB1001M offer quality video in a compact size. They are ideal for a wide variety of security and surveillance applications.
Application Diagram
Vi1005M
Cat-5
Vi1005M
Cat-5
DVR
16 Coax Jumpers
Vi6116: 16-Channel Active Receiver
Cat-5
Vi1005M
Cam # 1
Cam # N
Cam # 16
RoHS
The smart choice for quality video www.vigitron.com
DSVi1005FM_0212
Technical Specification*
Electrical
Video Format NTSC, PAL, SECAM Frequency DC to 10 MHz Coax 75 Ohm Twisted Pair 100 Ohms +/- 20%, 24 AWG minimum up to 1,000 ft. (305 m)* unshielded Category 2-7 Insertion Loss 0.3 dB CMRR 60 dB Power No power required Connectors Video: Male BNC (VB1005M) Video: Female BNC (VB1005F) UTP: Toll-less terminal block
Environmental
Humidity 0 to 95%, non-condensing Temperature Operating: -10°C to +50°C Storage: -30°C to +70°C
Mechanical
Dimensions 1.43x0.60x0.97 in., 3.6x1.5x2.5 cm Weight 0.2 oz, 7 g Material ABS plastic, UL rating of 94V-0
*Specifications are subject to change without notice.
Ordering Information
PART No. VB1005F Video Balun w/
VB1005M Video Balun w/ M
Description
System Configuration
750 ft. 228 m
Passive Transceivers Channels
VB1001F/M vb1005F/M VB1007M
1
Vi1001F/M/P Vi1003M Vi1006M
4
Vi1004 Vi1008
8
Vi1016
16
Vi1032
32
Maximum Cable
Distance
3,000 ft. 915 m
Active Receivers
Channels
1 4
8 16 32
Female BNC
ale BNC
ModelModel
Vi6100VR/Vi6200VR Vi6104/Vi6204 Vi6108/Vi6208/Vi6308 Vi6116/Vi6216/Vi6316 Vi6132/Vi6232/Vi6332
2,000 feet (610 m) for Vi6200 series
Opened Connector
Closed Connector
Wire and Cable Recommendations
The Vigitron products are designed to be used with unshielded twisted pair (UTP) wiring. The UTP wire must be 24AWG - 12AWG or Category 2-7 cable. Multi pair cable with an overall shield is acceptable, however individually shielded pairs should be avoided. Multiple UTP video feeds can be operated in the same communication cable along with telephone, computer, control signals and low power voltages. While UTP video may be routed through punch-down block terminals, any resistive, capacitive or inductive devices (such as T-taps or MOV's) must not be used. Please contact Vigitron for more specific information regarding wire types and proper installation techniques.
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205 13906 Sparren Ave. San Diego, CA 92129, USA • info@vigitron.com • www.vigitron.com
© Copyright 2013 Vigitron, Inc.
Loading...