Linear SWD-211, SWR-211, SWR-221 Specsheet

SWING GATE OPERATORS

SW Series

SWC COMMERCIAL

• 1/2 or 1 HP continuous-duty PSC motor

• 115 VAC or 230 VAC single phase

SWD COMMERCIAL/RESIDENTIAL

• DC-powered battery back-up with advanced soft start/soft stop motor control

• Full-time 1/2 HP DC motor

• Selectable fail-safe or fail-secure modes of operation

• Solar power capable

SWR RESIDENTIAL

• 1/2 HP PSC motor

• 115 VAC or 230 VAC single phase

COMMON FEATURES

• Crank style

• Black UV Stabilized polyethylene cover

• Pad mount standard; post mount optional

• Exterior reset button

• UL325/UL991 compliant APeX controller

• Fully integrated radio receiver

All Models ETL Listed;

UL325 Compliant

Supporters and Proud Members of

ELECTRICAL

SW SERIES SWING GA TE OPERA TOR SPECIFICA TIONS

V oltage Drive Maximum Maximum Seconds Maximum

Model HP (Single Phase) Ty pe Gate Length Gate W eight to Open Cycles

SWC-2 1/ 2

SWC-1 1

SWD-211 1/ 2

SWR-211 1/2

SWR-221 1/2

115 or 230 Vc rank 17’ 600 lbs 11-14

115 or 230 Vc rank 19’ 1000 lbs 11-14

crank 18’ 700 lbs 11-14

115 V crank 15’ 500 lbs 11-14 150/day

230 V crank 15’ 500 lbs 11-14 150/day

SW C

SWD

SWR

continuous duty

115V 24 VDC battery backup (solar charger optional)

• Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety

• Continuous tone entrapment alarm with reset button

• Integrated programmable warning beeper during gate movement

• LED diagnostic display for ease of setup and troubleshooting

• Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm

• Regulated 24 Volt DC power available for access control accessories

• Integrated maximum run and auto close timer (0-9 minutes)

• Built-in networked dual

➎

gate capability using 3-wire shielded cable

MECHANICAL

• Heavy-duty, zinc-plated, steel chassis

• Right-angle gear reducer

• 1” diameter output shaft

• Optional adjustable torque limiter

• Heavy-duty pillow block bearings

• Universal pad mount standard; optional post mount kit

➌

➊

Cam Operated Limits

➊

Easily accessible through access door

APeX Controller

➋

• UL325/UL991 compliant 24 VDC control module

• Full featured for access

➍

control, security, and entrapment protection

➋

• Includes APeX Controller with integrated radio receiver, plug-in loop detector capability, surge protection, and easy to read labeling standard.

Steel Crank

➌

• Easily removable

• Integrated manual disconnect

Heavy-Duty Components

➍

Gear reducer and pillow block bearing for smooth, reliable, quiet power transmission

Standard Convenience

➎

Features

• Exterior reset button

• Power on/off button

• Accessory power outlet on 115 V machines

• Integrated 3-button station

Dimensions

CAUTIONS

• Automatic gates not for pedestrians

• Automatic gate operators designed for vehicular traffic only; operators are powerful and can cause serious injury or death; DIRECT ALL PEDESTRIAN TRAFFIC TO SEPARATE PEDESTRIAN GATE

• UL325 requires use of contact or non-contact anti-entrapment devices

• ASTM F2200 requires that all exposed rollers are covered

(800) 421-1587 • www.linearcorp.com