Linear SLR-211, SLR-221, SLD-211 Specsheet
SLIDE GATE
OPERATORS
SL Series
SLC COMMERCIAL
• 1/2 or 1 HP continuous-duty PSC motor
• 115 VAC or 230 VAC single phase
SLD COMMERCIAL/RESIDENTIAL
• DC-powered battery back-up with advanced soft
start/ soft stop motor control
• Full-time 1/2 HP DC motor
• Selectable fail-safe or fail-secure modes of
operation
• Solar power capable
SLR RESIDENTIAL
• 1/2 HP PSC motor
• 115 VAC or 230 VAC single phase
COMMON FEATURES
• Black UV Stabilized polyethylene cover
• Reliable chain drive
• Pad mount standard; post mount optional
• Exterior reset button
• UL325/UL991 compliant APeX controller
• Manual disconnect
• Fully integrated radio receiver
All Models ETL Listed;
UL325 Compliant
Supporters and Proud Members of
ELECTRICAL
SLC
SLD
SLR
SL SERIES SLIDE GATE OPERATOR SPECIFICATIONS
V oltage Drive Maximum Maximum Gate Maximum
Model HP (Single Phase) Ty pe Gate Length Gate W eight Speed Cycles
SLC- 21 /2
SLC- 11
SLD-211 1/ 2
SLR-211 1/2
SLR-221 1/2
115 or 230 V #41 c hain 37’ 1000 lbs 11”/sec
115 or 230 V #40 c hain 45’ 2000 lbs 11”/sec
#41 c hain 40’ 1000 lbs 12”/sec
115 V #41 chain 25’ 500 lbs 11”/sec 150/day
230 V #41 chain 25’ 500 lbs 11”/sec 150/day
continuous
duty
continuous
duty
continuous
duty
115V
24 VDC battery
backup
(solar charger
optional)
• Integral entrapment sensing
system with digital set point
for quick accurate adjustment
and enhanced safety
• Continuous-tone entrapment
alarm with reset button
• Integrated programmable
warning beeper during gate
movement
• LED diagnostic display for ease
of setup and troubleshooting
• Selectable pre-start alarm with
provision for ADA compliant visual
pre-start and run alarm
• Regulated 24 Volt DC power
available for access control
accessories
• Integrated maximum run and
auto close timer (0-9 minutes)
• Built-in networked
dual gate capability
using 3-wire shielded
cable
MECHANICAL
• Heavy-duty, zincplated, steel chassis
• Easy-to-operate
emergency manual
disconnect handle
• 1/2 HP #41 chain,
1 HP #40 chain - 31' included
• Universal pad mount standard;
optional post mount kit
➊
➎
➌
Rotary Mechanical Limits
➊
Easy access inside control
box
APeX Controls
➋
➍
• UL325/UL991 compliant
24 VDC control module
• Full featured for access
control, security, and
entrapment protection
➋
• Includes APeX Controller with
integrated radio receiver, plug-in loop
detector capability, surge protection,
and easy to read labeling standard.
Manual Disconnect
➌
• Simple and secure manual
operation during power
failure or emergency
• Optional remote cable kit
for outside-the-gate access
Heavy-Duty Components
➍
Gear reducer and pillow
block bearing for smooth,
reliable, quiet power
transmission
Standard Convenience
➎
Features
• Exterior reset button
• Power on/off button
• Accessory power outlet
on 115 V machines
• Integrated 3-button station
Dimensions
CAUTIONS
• Automatic gates not for pedestrians
• Automatic gate operators designed
for vehicular traffic only; operators
are powerful and can cause
serious injury or death; DIRECT
ALL PEDESTRIAN TRAFFIC TO
SEPARATE PEDESTRIAN GATE
• UL325 requires use of contact
or non-contact anti-entrapment
devices
• ASTM F2200 requires that all
exposed rollers are covered
Copyright 2010, Linear LLC P/N 223141 F
(800) 421-1587 • www.linearcorp.com
Loading...