2010 Product Line Catalog
Electronic Access Control
Locksets
Now Part of
1
ELECTRONIC
ACCESS
CONTROL
With thousands of units in operation worldwide, IEI locksets are recognized
for the highest level of quality and reliability. Combining eld proven keypad
technology with a Grade 1 lockset that features metal alphanumeric Braille
keys, UV conformal coated electronics and a neoprene gasket, the LS Series
UL listed Locksets are rugged and provide true indoor/outdoor durability. LS
Series Electronic Access Control Locksets provide the value and accountability
of access control where traditional locks and keys were used in the past.
LOCKSETS
The LS Series locksets are available in a variety of lock congurations to
accommodate customer applications. Special order nishes are available
to meet most architectural requirements. The LS Series are simple to install
with only one additional 1 inch hole (model dependent) where existing locks
were installed. For added protection the LS Series provide a through-door
wire raceway preventing wire chafng and additional protection from
moisture related failures.
There are three different functional variations of LS series locksets to choose
from. The LS1 stores up to 120 users and is programmable from the
keypad. The LS2 & LS2P models use the Hub Manager Professional Software
program to manage people and doors through step-by-step wizard assisted
conguration and easy to use management reports and have full functionality
of traditional access system.
Locksets
Lock Types
Finishes & Options
Dimensions
Order Guide
4
6
8
8
9
LS Series
Locksets
LS1
Providing the combination of access control protection, and an ANSI Grade-1 lockset, the
LS1 series locksets are a perfect choice to manage door access that may otherwise not be
available through traditional hardwired access systems. The access decisions are made at the
door and access is granted to those that have a valid PIN programmed into the LS1.
FEATURES
• Non-volatile eeprom memory allows in-shop programming
• One non-handed unit for both indoor and outdoor applications
• Wire raceway provides clean installation and protects wires inside door
• Programs the same as all IEI products
• Durable alphanumeric Braille keys
• Selective Lockout of grouped of users
• Passage/Toggle codes allow door to remain unlocked
• Service codes allow one-time entry then are deleted
automatically
• Error Lockout for successive invalid attempts
• Two-stage Low Battery Alert assures entry
• Propped Door and Forced Door alerts when used with a
normally open magnetic switch
• Request to Exit allows door to be unlocked from a distance
Compliance
ANSI 156.2, Series 4000 Grade 1
Federal Handicap and ANSI A117.1 Accessibility Code
Federal FF-H-106C
California: (Formerly Title 19, State Fire Marshall)
Environmental
Electronics sealed in conformal coating process
Through door wire raceway reduces wire exposure to moisture
Neoprene gasket seals exterior housing
-20F to 120F, up to 98% humidity (non-condensing)
Electrical
Power: 4 AA alkaline batteries
Cycles: Up to 150,000
04
Electronic Access Control Locksets
Electronic Access Control Locksets
LS2 & LS2P
The full featured LS2 & LS2P series locksets provide large system features from an at the door solution.
The LS2 & LS2P series locksets are a perfect choice to manage door access that may otherwise not be
available through traditional hardwired access systems. The LS2 & LS2P series locksets use an ANSI
Grade-1 lockset and the powerful management capabilities of the Hub Manager Professional software.
FEATURES
• 2,000 individual users per lockset
• 2,000 transactions stored per lockset
• Wireless lockset programming and audit trail retrieval
with PDA running Palm OS version 3.5 or newer
• Managed with Hub Manager Professional Software
version 4 or higher
• Unlimited Access Levels including Time Zones and Holidays
• 20,000 users per system
• Unlimited Sites
• Import user names
LS2P:
• Reads HID proximity cards and fobs up to 37-bit
• Users can be Code, Card, Code and Card, Code or Card
ELECTRONIC ACCES S
CONTROL LOCKSETS
Compliance
ANSI 156.2, Series 4000 Grade 1
Federal Handicap and ANSI A117.1 Accessibility Code
Federal FF-H-106C
California: (Formerly Title 19, State Fire Marshall)
Environmental
Electronics sealed in conformal coating process
Through door wire raceway reduces wire exposure to moisture
Neoprene gasket seals exterior housing
-20F to 120F, up to 98% humidity (non-condensing)
Electrical
Power: 4 AA alkaline batteries
Cycles: Up to 90,000
Data Transfer Device (DTD)
Each lockset can be wirelessly programmed through infrared
(IR) signals with the Model DTD Data Transfer Device or via
select IR equipped PDAs. User codes, access privileges,
lockset programming, and transaction history can be
transferred between the lockset and a PC running Hub
Manager Professional software, which also provides in-depth
management reports of people and door activity.
Electronic Access Control Locksets
05
LS Series
Lock Type
Cylindrical
This lockset easily retrots into an ANSI 151.8 prepared
door and requires only one additional 1” hole for
installation.
FEATURES
• Lock Body: Grade 1 Cylindrical Lockset w/ clutch
mechanism
• Latch: Grade 2, 3 hour re rating reversible with 1/2”
throw, 23/4” backset
• Strike Plate - 2 3/4” “T” strike
• Door Thickness: 1 5/8” to 1 7/8”. 1 3/8” with optional
spacer kit
• Cylinder: Solid Brass Schlage “C” keyway, 6 pin,
with (2) nickel silver keys
• Optional Cylinders: I/C Core Prep Lever to accept
OEM cylinders (see conguration guide for details)
See Order Guide 2 - page 45
Mortise
This lockset retrots most ANSI 115.1 Mortise prepared
doors with the additional of (2) through holes. The LS
Series Mortise lockset can be easily installed in a door
with an existing mortise lock.
FEATURES
• Lock Body: Grade 1 Mortise Lock body
• Latch: Stainless Steel Latchbolt with 3/4” projection
1/2” Throw Deadlocking latch
• Door Thickness - 1 3/4” to 2 1/4”
Handing: Field reversible on Crescent and American
handles.
• Cylinder: Solid Brass 1 1/8” Schlage “C” keyway, 6 pin
mortise cylinder, with (2) nickel silver keys. 1 1/8” and
2” can be used with optional spacers
• Optional Cylinders: see conguration guide for details
06
Electronic Access Control Locksets
Exit
Allows the LS Series locksets to be installed in door
applications requiring emergency egress exit bar.
Easily installs requiring only (2) additional through holes.
Exit bar supplied by others.
FEATURES
• Door Thickness: 1 3/4” to 2 1/4”
• Cylinder: Solid Brass 1 1/8” Schlage “C” keyway, 6 pin
mortise cylinder, with (2) nickel silver keys. 1 1/8” and
2” can be used with optional spacers
• Optional Cylinders: see conguration guide for details
• Requires Exit Device Mounting Kit: see conguration
guide for details
• Also compatible with Rim panic devices, surface horizontal
rod devices. Contact factory for installation instructions for
these applications
Electronic Access Control Locksets
ELECTRONIC ACCES S
CONTROL LOCKSETS
Deadbolt
This lockset retrots most ANSI 115.1 Mortise with
Deadbolt prepared doors with the additional of (2)
through holes. The LS Series Deadbolt lockset can
be easily installed in a door with an existing mortise
and deadbolt lock.
FEATURES
• Lock Body: Grade 1 Mortise Lock body with Deadbolt
• Latch: Stainless Steel Deadbolt with 1” projection,
latchbolt with 1” projection and deadlocking latch.
Deadbolt may be projected from option 1 3/4” mortise
cylinder with cover cam or thumb turn from inside door
• Door Thickness: 1 3/4” to 2 1/4”
• Privacy Setting feature available
• Cylinder: Solid Brass 1 1/8” Schlage “C” keyway, 6 pin
mortise cylinder, with (2) nickel silver keys. To project
deadbolt from outside door requires a 1 3/4” mortise
cylinder. 1 1/8” and 2” can be used with optional
spacers and a straight cam
• Optional Cylinders: see conguration guide for details
Electronic Access Control Locksets
07
LS Series
LS Series Options
See Order Guide 3 - page 45 See Order Guide 4 - page 45 See Order Guide 5 - page 45
Finishes:
3 - Polished Brass / US3
10 - Dark Bronze / US10B / 613
26D - Brushed Chrome / US26D
LS Series Dimensions
Lever Choices:
Cylinder Types:
The standard cylinder is a solid brass Schlage “C” keyway
installed in the lockset body or handle.
For eld installation of commonly available OEM lock cylinders,
Cylindrical locksets can be ordered with an I/C core prep lever
(no cylinder in the lockset lever). Mortise, Exit, and Deadbolt
locksets can be ordered with no cylinder in the lockset body.
See Cylinder Type options in Step 5 of the Order Guide.
Standard
Schlage “C”
Keyways
Data Transfer Device
Hand-held Model DTD DATA TRANSFER DEVICE for wireless
infrared (IR) transfer of data and retrieval of stored events from
the software managed prox.pad plus IR and LS2P Series
wireless access control locksets. Data is saved to an internal
memory for transfer to a PC via USB connection. Powered by
4 “AA” batteries. Includes Hub Manager Professional software,
USB cable & batteries.
FEATURES
• Infrared hand held communication
• Battery powered
• Works with the LS2 & LS2P access control locksets
08
Electronic Access Control Locksets
Order Guide
The model number determines the lockset options.
Order using these easy steps
Electronic Access Control Locksets
2 Select Lock Type
LOCK TYPE
C-Cylindrical Lockset
M- Mortise Lockset
D- Mortise Lockset w/ deadbolt
E- Exit Trim
1 Select LS Model Type
LS MODEL TYPE
LS1
LS2
LS2P
LS2P C 26D CR – ICB
3 Select Finish Type
FINISH
Alternate Finish Orders (model LS2 & LS2P only)
consult factory for availability and pricing.
3 - Polished Brass / US 3
10 - Dark Bronze / US 10B / 613
26D - Brushed Chrome / US 26D
4 Select Lever Type
LEVER
CR - Crescent lever
(not available for Schlage IC core prep)
AM - American lever
KN- Knob
(cylindrical lock type only, special order
consult factory)
5 Select Cylinder Type
CYLINDER TYPE
Blank -Schlage C (standard)
*ICB - SFIC Best (specify 6 or 7 pin)
*ICY - RC Yale (specify 6 or 7 pin)
*ICC - RC Corbin (specify 6 or 7 pin)
*ICG - RC Schlage (6 pin only)
*ICS - RC Sargent (6 pin only)
LC - No cylinder
*For cylindrical locksets only
ELECTRONIC ACCES S
CONTROL LOCKSETS
SPECIAL HARDWARE ORDERS
Minimum order quantities may be required,
consult factory for availability and pricing
B2 - 2–3/8˝ Backset Latch
B3 - 3–3/4˝ Backset Latch Extender
B5 - 5˝ Backset Latch Extender
S2 - 2–3/4˝ T Strike
REX - Request To Exit Option In Handle
SO - Solid Exterior Lever
EXIT TRIM ADAPTER PLATES
LSEVD
LSEP
LSEYC
LSED
LSESA
Von Durpin 99
Precision 1100
Yale 7100 & Corbin ED5200
Dorma 9300
Sargent 8800 & Arrow 3800
Electronic Access Control Locksets
0270001
0270002
0270003
0270004
0270005
09
Li near LLC | 1950 Camin o Vid a Roble | Sui te 150 | Car lsbad, CA 92008 | 80 0.421.1587 | ww w.li nearc orp.co m
P924
Loading...