Page 1
Linear Z-Wave Lighting, Security & Control Products
Linear’s family of Z-Wave certied wireless lighting, security and
control products bring a new level of intelligent wire-free capability to
commercial and residential environments.
The Z-Wave wireless protocol is an international wireless standard
for remote home automation, security and other applications.
Embedded in each device, the Z-Wave smart chip enables two-way
RF communication among hundreds of Z-Wave enabled devices,
allowing products and services from multiple manufacturers to
work seamlessly.
Linear Z-Wave products are easy to install, and allow dealers to
create an integrated wireless network with nearly limitless expansion
and interoperability with security and health monitoring systems,
energy management, home entertainment, appliances, and more.
Home and business owners gain a host of wireless lifestyle
advantages:
• Convenience
• Affordability
• Compatibility with building automation systems
• Ease of Use
• High reliability
• Scene Capable
All products operate at the standard 908.42 MHz frequency,
supporting network wide inclusion and are security system
compatible.
Get even more from Z-Wave devices with a mobile
control service - available from any of Linear’s home
automation service partners.
All Linear Z-Wave products integrate with other Linear Z-Wave enabled
products, and can also act as a wireless repeater to ensure that
commands intended for another device in the network are received
(useful when a device would otherwise be out of radio range).
Page 2
Linear Z-Wave Lighting Products
LB60Z-1 Dimmable LED Light Bulb
The LinearLinc™ LB60Z-1 is a Z-Wave controllable and fully-dimmable, instant-on LED screw-in light
bulb that provides pleasant soft-white illumination equivalent to a 60-watt incandescent bulb, yet uses
only 9 watts of energy. The LB60Z offers great value and convenience with an estimated 22+ year
lifespan (3 hrs./day avg.), and remote control through a compatible Z-Wave hub or controller.
WS15Z-1 Wall Mount Switch
The Linear WS15Z-1 Wall Mount Switch allows remote ON/OFF control of loads connected to the switch,
and is easily wired in place of a standard wall switch.
Replaceable Trim Ring
The WS15Z-1 Wall Mount Switch has a eld replaceable trim ring - the color of the device can be altered
with the Trim Ring Kit model in black, brown and almond.
WT00Z-1 3-Way Wall Mount Accessory Dimmer/Switch
The WT00Z-1 Wall Mount Accessory Dimmer Switch allows remote ON/OFF control and dimming of
lights controlled by associated Z-Wave modules, creating virtual 3-way switches. The WT00Z-1 controls
no load directly, so it can be wired anywhere power is available, without the need for a traveler wire.
Replaceable Trim Ring
The WT00Z-1 3-Way Wall Mount Accessory Dimmer/Switch has a eld replaceable trim ring - the color
of the device can be altered with the Trim Ring Kit model in black, brown and almond.
WD500Z-1 Wall Mount Dimmer
The Linear WD500Z-1 Wall Mount Dimmer allows remote ON/OFF control and dimming of connected
lights. The dimmer switch is easily wired in place of a standard wall dimmer, and requires a Neutral
connection.
Replaceable Trim Ring
The WD500Z-1 Wall Mount Dimmer has a eld replaceable trim ring - the color of the device can be
altered with the Trim Ring Kit model in black, brown and almond.
Also Available: WD1000Z-1
Linear also offers a 1,000 watt capacity dimmer, model WD1000Z-1.
Page 3
Linear Z-Wave Lighting Products
WO15Z-1 Wall Mounted Outlet
The Linear WO15Z-1 Wall Outlet is wired in place of a standard duplex receptacle. This device allows
remote ON/OFF control of loads connected to the bottom outlet (the other outlet remains powered at all
times).
2008 National Electric Code Compliance
The 2008 NEC requires that all new installations of single and multi-family homes install tamper-resistant
outlets. The WO15Z-1 is fully compliant with this code.
PD300Z-2 Plug-in Lamp Module
Z-Wave Plug-in Lamp Module
T
he Linear PD300Z-2 Plug-in Lamp Module is designed to provide Z-Wave control to a connected
dimmable lamp. The PD300Z-2 module is plugged into any standard grounded AC wall outlet, and the
lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off
remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and
one pass-through (powered at all times).
AutoSense
Unique to Linear, the AutoSense feature allows for local lamp activation independent of the Z-Wave
controller status. With AutoSense, one can simply switch the connected lamp’s manual switch off, then
on, and AutoSense will instruct the PD300Z-2 to turn the lamp on.
PS15Z-2 Plug-in Appliance Module
The Linear PS15Z-2 Plug-in Appliance Module is designed to provide Z-Wave control to a connected
load. The PS15Z-2 module is plugged into any standard grounded AC wall outlet, and the appliance or
other device is then plugged into the module. Once connected, the appliance/device can be turned on
or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled,
and one pass-through (powered at all times).
FS20Z-1 Isolated Contact Fixture Module
The Linear FS20Z-1 Isolated Contact Fixture Module can be mounted in a single- or multi-gang electrical
box to operate loads or control relay-based devices. The relay can be isolated for dry contact
applications or powered to switch live loads. This device can operate loads of up to 277v.
Possible Applications: Commercial Lighting, In-Ceiling Lighting/fans,
Dry-Contact Relays, Pool Pumps, Water Heaters.
Page 4
Linear Z-Wave Security Products
WAPIRZ-1 Passive Infrared Motion Detector
The Linear WAPIRZ-1 Passive Infrared Motion Detector (PIR) is a wireless indoor security device
designed to sense and report motion activity and transmit alert signals via a Z-Wave network.
The PIR comes with a long-life battery, and provides a low-battery alert signal when the battery
needs replacement. The PIR also includes a temperature sensor that can trigger an alert based
on specic changes to the room’s temperature.
SPECIFICATIONS
• Motion Detection Range: 6’ to 32’
• Horizontal Coverage Angle: 120 Degrees
• Temperature Change Alert: 2° F
• For non-life safety applications
WADWAZ-1 Door-Window Sensor
The WADWAZ-1 is a two-piece sensor designed to be afxed to a door, window or other
permanent xture that opens and closes, such as a drawer, safe, or valuables storage cabinet.
Once paired with a compatible Z-Wave controller or hub, the sensor will report when the xture
has been opened or closed via wireless Z-Wave transmission.
SPECIFICATIONS
• Maximum Sensor Gap: 0.75”
• Supports External Contact: Yes
• For non-life safety applications
• Long-life battery included
WA105DBZ-1 Sounder/Strobe Warning Device
The Linear WA105DBZ-1 is a Z-Wave enabled combination Sounder/Strobe warning device,
designed to alert intruders of a security system presence. Once paired with a compatible
Z-Wave controller or hub, the sensor can be turned on or off remotely via the Z-Wave controller
and network. When on, the sounder emits a very loud 105 dB alert tone and the integrated
strobe ashes brightly.
The WA105DBZ-1 Sounder/Strobe is designed to be wall-mounted, and comes with a ULapproved AC plug-in power supply and offers an integrated battery backup, in case of AC power
interruption.
SPECIFICATIONS
• Sounder Volume: 105 dB @ 1 Meter
• Strobe Illumination: 4 white LED, 360 lumens
• For non-life safety applications
Once paired with a compatible Z-Wave controller or hub, Linear Z-Wave products can also trigger other Z-Wave
devices to turn on or off automatically via the Z-Wave controller, such as security and control equipment or lights.
Page 5
Linear Z-Wave Control Products
GD00Z | Linear Z-Wave Garage Door Remote Controller Accessory
The Linear GD00Z Garage Door Remote Controller Accessory
opens or closes a sectional garage door remotely through a Z-Wave
certied Gateway or Security Panel. It is compatible with virtually
any automatic garage door opener connected to a sectional garage
door. Installers only need to ‘pair’ the unit into the Gateway, mount
the unit, connect two wires and plug it in. The GD00Z provides
both audible and visual warnings prior to remotely-activated door
movement, allowing it to meet UL 325-2010 safety requirements.
The GD00Z ships with a wireless tilt sensor that attaches to the
inside of the garage door, which reports ‘open’ or ‘closed’ status to
the controller.
Specications
• Power: 120VAC, 50/60 Hz
• Garage door position sensor frequency: 345 MHz
• Z-wave Frequency: 908.42 MHz
Z-Wave Specications
• Range: Up to 100 feet between the wireless
controller and/or the closest Z-Wave receiver
module
• Network wide inclusion
• Scene: Command Class
• Security compatible
Certications
• FCC
• ETL
Included Accessories
• Power supply 120VAC / 60Hz to 12VDC
• Garage Door Tilt Sensor
• Mounting Bracket and Hardware
DIMENSIONS
Controller - W x H x D (Inches): 6.94 x 1.38 x 5.0
Tilt Sensor - W x H x D (Inches): 1.69 x 0.88 x 1.19
Page 6
Linear Z-Wave Lighting, Security & Control Products
Part
Number
LB60Z-1 Dimmable LED Light Bulb
Part
Description Isolated Contacts /
Number
WT00Z-1 3-Way In-Wall Dimmer
Switch
WS15Z-1 In-Wall Switch 15 amps, 1800W max 1 H.P. max,
WD500Z-1 In-Wall Dimmer Switch,
500 W
WD1000Z-1 In-Wall Dimmer Switch,
1000 W
WO15Z-1 In-Wall Receptacle Outlet 15 amps, 1800W max n/a 600W max, 120 VAC Y N Y
PD300Z-2 Plug-In Lamp Dimmer
Module
PS15Z-2 Plug-In Small Appliance
Module
FS20Z-1 Fixture-Mounted Control
Module
Description Avg. Life Light Appearance Energy
(60-watt equivalent)
22.8 years
(3 hrs./day)
2700° K 9 watts 750 lumens Y
Motor Incandescent Auto
Resistive
None N Y Y
120 VAC
n/a n/a 500W (installed
n/a n/a 1000W (installed
n/a n/a 300W max, 120 VAC Y N Y
15 amps, 1800W max 1/2 H.P max,
120 VAC
20 amps G.P. max, 277
VAC, 10 FLA, 60 LRA,
250 VAC
1 H.P. max,
120/240 VAC
600W max, 120 VAC N Y Y
lighting, no
receptacles)
lighting, no
receptacles)
600W max, 120 VAC N N Y
960 W max, 120 VAC,
TV8 (Tungsten)
Sense
Brightness Z-Wave
Use
Repeater
Replaceable
Trim Ring
N Y Y
N Y Y
N N Y
Repeater
Z-Wave
Part
Number
WAPIRZ-1 Passive Infrared
WADWAZ-1 Door-Window Sensor Up to 100’ 5° - 140° F 3 VDC/CR123A White Y N
WA105DBZ-1 Sounder/Strobe
Part
Number
GD00Z-4 Garage Door Opener
Linear LLC | 1950 Camino Vida Roble | Suite 150 | Carlsbad, CA 92008 | 8 0 0.4 2 1.15 87 |
Description Z-Wave Range
(line of sight)
Up to 100’ 5° - 140° F 3 VDC/CR123A White Y N
Motion Detector
Up to 100’ 5° - 140° F 6 VDC/NiMH (permanent cell) White w/
Warning Device
Description Z-Wave Range
(line of sight)
Up to 100’ -4° to 122° F Controller: 12 VDC from 120 VAC/60Hz
Remote Controller
Operating
Temperature
Operating
Temperature
APPLIANCE CONTROLS
Power/Battery Color Security
red lens
Power/Battery Color Security
Black Y Y
power supply; Tilt Sensor: CR2032
www.linearcorp.com
Compatible
Y Y
Compatible
Z-Wave
Repeater
Z-Wave
Repeater
P/N 2 35610B
Loading...