With GoControl-branded smart home solutions, you get
fully-compatible, easy-to-use and affordable smart products
that satisfy your family’s home control needs and desires.
GoControl Smart products are so easy to install—and they work with nearly
®
everything else that talks Z-Wave
to create your own personal mix of smart control. Even add other brand smart
products to rev-up your smart home IQ!
Easy-to-UseCompatibleAffordable
. Mix and match GoControl smart products
Page 3
Control your home’s mood remotely
Using your Z-Wave hub, connect and control your GoControl light
bulbs and lighting fixtures from the switch or wirelessly from your app
to get the mood for comfortable living just right.
SMART ELECTRICAL
LB60Z-1
Bulbz
Smart Dimmable LED Standard Light Bulb
The GoControl model LB60Z-1 instant-on smart LED screw-in
light bulb is fully-dimmable, and provides pleasant soft-white
illumination equivalent to a 60-watt incandescent bulb, yet uses
only 9 watts of energy. You get great value and Z-Wave remote
control convenience with an estimated 22+ year lifespan
LBR30Z-1
Flood Light Bulb
Smart Dimmable LED Indoor Flood Light
By simply removing an existing ood light bulb and screwing in this GoControl
smart LED dimmable indoor ood light bulb, you’ll get beautiful, warm 65-watt
equivalent lighting for only 7.5 watts of energy use. Using your Z-Wave hub,
you’ll also get ’scene’ control for setting the right mood, or making this light
turn on or off when other Z-Wave devices are activated whether you’re at
home or away!
LB65R6Z-1
In-Ceiling
Smart LED Recessed Retrofit Lighting Kit
The GoControl Smart LED Recessed Retrot Light Kit is designed to
replace a conventional 5" or 6" recessed downlight. The kit comes with
a new white trim ring providing a fresh, clean look. It is simple to install
and setup and provides a long, 20+ years of life (3 hrs. /day). The light
provides instant-on, bright and fully-dimmable illumination, equal to
65-watt incandescent bulbs, but uses only 8.5 watts of energy—far
superior than either incandescent or uorescent light bulbs.
Page 4
SMART ELECTRICAL
WA00Z-1
Smart Battery-Powered
Wall Switch
• Great for controlling GoControl (or
other brand) Z-Wave lightbulbs installed
in xtures that use a wall switch
• Easily controls ON/OFF or dimming
of lighting
• One switch can be programmed to
control up to 10 Z-Wave lights, switches
and other Z-Wave automation devices
• Can be mounted over any standard
or decorator-style switch, or on just
about any surface (Simple self-adhesive
mounting pads included; can also
screw-mount over switch if desired)
• No need to do any wiring at all!
WD500Z-1
Smart Dimmer Switch
500 Watt
Our Wall Mount Dimmer allows remote ON/
OFF control and dimming of connected
lights. The dimmer switch is easily wired in
place of a standard wall dimmer, and requires
a Neutral connection.
Also Available: WD1000Z-1
We also make a 1,000 watt capacity smart
wall mount dimmer.
Replaceable Trim Ring Option
This device’s color can be changed easily in
the eld with our eld-replaceable trim rings
available in black, brown and almond.
WS15Z-1
Smart Wall Switch
Our WS15Z-1 Wall Mount Switch allows
remote ON/OFF control of loads connected
to the switch, and is easily wired in place of a
standard wall switch.
Replaceable Trim Ring Option
This device’s color can be changed easily in
the eld with our eld-replaceable trim rings
available in black, brown and almond.
WT00Z-1
Smart 3-Way Wall Switch
The WT00Z-1 Wall Mount Accessory Dimmer
Switch allows remote ON/OFF control and
dimming of lights controlled by associated
Z-Wave modules, creating a virtual 3-way
circuit. The WT00Z-1 controls no load
directly, so it can be wired anywhere power is
available, without the need for a traveler wire.
Replaceable Trim Ring Option
This device’s color can be changed easily in
the eld with our eld-replaceable trim rings
available in black, brown and almond.
WO15Z-1
Smart Wall Outlet
Our WO15Z-1 Wall Outlet is wired in place
of a standard duplex receptacle. This device
allows remote ON/OFF control of loads
connected to the bottom outlet (the other
outlet remains powered at all times).
2008 National Electric Code Compliance
The 2008 NEC requires that all new
installations of single and multi-family homes
install tamper-resistant outlets. The WO15Z-1
is fully compliant with this code.
Page 5
Smart Lighting Control Made Easy
GoControl smart home solutions help make busy lives easier,
giving you the smart remote control you want most.
With GoControl, just about anything in your home that you want to control,
automate and monitor is just a click away. We give you affordable and intelligent
solutions to set the right mood and help protect the people and places you hold
dear. GoControl smart products really rev-up your smart home’s IQ!
Page 6
GoControl Product Specification Chart
SMART SENSORS
Part NumberDescriptionZ-Wave Range (line of sight)Operating TemperaturePower/BatteryColorSecurity CompatibleRepeats Signal
WAPIRZ-1Passive Infrared Motion DetectorUp to 100'5° - 140° F3 VDC/CR123AWhiteYN
WADWAZ-1Door-Window SensorUp to 100'5° - 140° F3 VDC/CR123AWhiteYN
WA105DBZ-1Siren/Strobe Warning DeviceUp to 100'5° - 140° F
GB00Z-2Glass Break SensorUp to 100'32° to 120° F3 VDC/CR123A (2)WhiteYN
WF00Z-1Water Leak SensorUp to 130'32° to 120° F3 VDC/CR123AWhiteYN
WL00Z-1Water (Pipe) Flow DetectorUp to 130'32° to 120°F
SMART CONTROL
Part NumberDescriptionZ-Wave Range (line of sight)Operating TemperaturePower/BatteryColorSecurity CompatibleRepeats Signal
GD00Z-4
GC-TBZ48Battery-powered Smart Thermostat Up to 100'32° to 120°F
Controller: 12 VDC from
120 VAC/60Hz power supply;
Tilt Sensor: CR2032
4 x ‘AA’; Can be powered by
24V HVAC “R” or “C” wire
BlackYY
BlackYY
White
w/silver trim
YN
500W
(installed lighting, no receptacles)
1000W
(installed lighting, no receptacles)
960 W max, 120 VAC, TV8
(Tungsten)
NYY
NYY
NNY
Page 8
SMART ELECTRICAL
PD300Z-2
Smart Plug-In for Lamps
The GoControl PD300Z-2 Plug-in Lamp
Dimmer provides Z-Wave control to a
connected dimmable lamp. Plug the module
into any standard grounded AC wall outlet,
and plug in any dimmable lamp or light.
Using your hub, the lamp can be dimmed or
turned on or off remotely or the lamp can be
controlled locally using the module’s button.
The module has two power receptacles—
one controlled, and one pass-through
(powered at all times).
AutoSense
The unique AutoSense feature allows for
local lamp activation independent of the
Z-Wave controller status. With AutoSense,
one can simply switch the connected lamp’s
manual switch off, then on, and AutoSense
will instruct the module to turn the lamp on.
PS15Z-2
Smart Plug-In for Appliances
The GoControl PS15Z-2 Plug-in Appliance
switch provides on/off control to a
connected load. Plug the Appliance Module
into any standard grounded AC wall outlet,
and plug the small electrical appliance
for remote or local control. The module
contains two power receptacles - one
controlled, and one pass-through (powered
at all times).
FS20Z-1
Smart Fixture Module
GoControl’s Isolated Contact Fixture Module
can be mounted in a single- or multi-gang
electrical box to operate loads or control
relay-based devices. The relay can be
isolated for dry contact applications or
powered to switch live loads. This device can
operate loads of up to 277v.
Possible Applications: Commercial Lighting,
In-Ceiling Lighting/fans, Dry-Contact Relays,
Pool Pumps, Water Heaters.
Page 9
SMART SENSORS
WADWAZ-1
Smart Door/Window Sensor
A two-piece sensor designed to be afxed
to a door, window or other permanent
xture that opens and closes, such as a
drawer, safe, or valuables storage cabinet.
Once paired with a compatible Z-Wave
hub, the sensor will report when the xture
has been opened or closed via wireless
Z-Wave transmission.
Specications
• Maximum Sensor Gap: 0.75"
• Supports External Contact: Yes
• Long-life battery included
• For non-life safety applications
WAPIRZ-1
Smart Motion Detector
Our Passive Infrared Motion Detector
(PIR) is a wireless indoor security device
that senses and reports motion activity
and transmits alert signals via Z-Wave.
The PIR conveniently delivers a lowbattery alert signal when the battery
needs replacement. The PIR also senses
temperature changes and can trigger an
alert based on specific changes to the
room’s temperature.
Specications
• Motion Detection Range: 6' to 32'
• Horizontal Coverage Angle:
120 Degrees
• Temperature Change Alert: 2° F
• Long-life battery included
• For non-life safety applications
WA105DBZ-1
Smart Siren-Strobe Alarm
Our combination Siren/Strobe smart warning
device alerts intruders of a security system
presence. Once paired with a compatible
Z-Wave hub, the sensor can be turned on or
off remotely via the Z-Wave network. When on,
the siren emits a very loud 105 dB alert tone
and the integrated strobe ashes brightly.
The WA105DBZ-1 Siren/Strobe wall-mounts,
and comes with a UL-approved AC plug-in
power supply and offers an integrated battery
backup, in case of AC power interruption.
Specications
• Siren Volume: 105 dB @ 1 Meter
• Strobe Illumination: 4 white LED,
360 lumens
• For non-life safety applications
Home Security Suites
Wireless
Door-Window Sensors
Wireless
Door-Window Sensors
Motion Detector
Wireless
Motion Detector
Siren & Strobe
Wireless
Premium
Wireless
Essential
BOX INCLUDES:
• 3 QTY.
DOOR-WINDOW
SENSORS
• 1 MOTION DETECTOR
• 1 105 DB SIREN WITH
FLASHING STROBE
BOX INCLUDES:
• 2 QTY.
DOOR-WINDOW
SENSORS
• 1 MOTION DETECTOR
Page 10
SMART SENSORS
GB00Z-2
Smart Glass Break Detector
Using your Z-Wave hub receive an alarm
on your smart phone app if window breaking
sounds are detected.
Features:
• Always ready detection
• Spatial detection of window shattering
sounds
• Long-life battery included
• Z-wave communications test button
SMART SENSORS
WF00Z-1
Smart Water Leak Sensor
The GoControl Smart Water Leak Sensor is
great for multiple locations in your home—
set one by your toilets, water heater, under
sinks, and even near water-using appliances
like washing machines and dishwashers.
Easy to install – battery powered:
• Place sensor on the oor near potential
leak sources.
• 10+ year battery life (battery included)
• Great for second homes, while on
vacation, or when you’re away
SMART CONTROL
WL00Z-1
Smart Water Flow Detector
The GoControl Smart Water Flow Detector
easily attaches to nearly any copper
residential or light commercial main or other
water supply pipe and senses when water is
owing through the pipe. Works on copper
water supply pipes from 1/2" to 1 1/2" in
outer diameter. Detector can be custom
programmed to alert at specic times when
customers do not expect water to be owing,
or for when longer than normal duration ow
occurs. The Smart Water Flow Detector
requires an AC power source located within
10'of sensor placement on pipe.
HUSBZB-1
Smart PC-Based Combo
ZigBee/Z-Wave Hub
The GoControl QuickStick Combo is a simpleto-use combination ZigBee & Z-Wave controller
that plugs into your PC computer’s USB port,
allowing home automation control of ZigBee
and Z-Wave devices using its free smartphone
app. The QuickStick Combo devices comes
with free PC-based software and a free
downloadable app, allowing you to control
ZigBee and Z-Wave products from Nortek
S&C and other manufacturers. Remote control
requires that the associated PC remains
powered, turned on, and internet-connected.
(If the connected PC reverts to sleep or
hibernate mode, the remote control capabilities
will not function).
HUSBZ-1
Smart PC-Based Z-Wave Hub
The GoControl QuickStick is a simple-touse Z-Wave controller that plugs into your
PC computer’s USB port, allowing home
automation control of Z-Wave devices using
its free smartphone app. The QuickStick
devices comes with free PC-based software
and a free downloadable app, allowing you
to control Z-Wave products from Nortek
S&C and others. Remote Z-Wave control
requires that the associated PC remains
powered, turned on and connected to the
internet. (If the connected PC reverts to sleep
or hibernate mode, Z-Wave remote control
capabilities will not function).
Page 11
Your family’s comfort, safety & security are all right at hand with GoControl.
Our sensors and control equipment help to protect and preserve the lifestyle you want to live, whether
you’re relaxing at home, or away for a while. Live life richly and effortlessly with GoControl!
SMART CONTROL
GD00Z-4
Smart Garage Door Controller
Opens or closes garage door
remotely through a Z-Wave hub/
controller. Compatible with virtually
any garage door opener/sectional
door. Includes Tilt Sensor.
Specifications
• Power: 120VAC, 50/60 Hz
• Garage door position sensor frequency: 345 MHz
• Z-wave Frequency:
908.42 MHz
Z-Wave Specifications
• Range: Up to 100 feet
between the wireless
controller and/or the closest
Z-Wave receiver module
• Network wide inclusion
• Security compatible
• Scene: Command Class
Certifications
• FCC, UL
GC-TBZ48
Smart Battery-Powered Thermostat
Features
• Battery powered design
runs on 4 “AA” batteries
• Extremely long 2 year
battery life
• Can be powered by 24 VAC
“C” wire from HVAC system
• Z-Wave compatible -
Ver. 4.5.5
• Supports Z-Wave FLiRS
functionality
• Works on standard HVAC
systems: 2 stage heat/ 2
stage cool
• Works on heat pump HVAC
systems: 3 stage heat/ 2
stage cool
• Incredibly easy to install
and program
• USB rmware upgrade ability
• Wall mount or mounts on
single-gang junction box