LINDY 51245 User Manual

Tested to Comply with
FCC Standards
For Home and Office Use!

PCIe Low Profile

2 Serial & 1 Parallel Card

User Manual English

No. 51245

www.lindy.com

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (APRIL 2016)

Bus No

Device No

Func No

Vendor ID

Device ID

Device Class

IRQ

0 7 1

8086

7010

IDE Controller

14 0 13 0 1409

7168

Simple COMM. Controller

10

Introduction

This card is equipped with one high speed RS-232 serial interfaces. The serial ports include 128Byte
FIFO with speeds up to 921Kb/Sec.

Specification

 Chipset: Oxford 952, 128Byte DMA FIFO
 Compatible chips: with 16C950, 16C750, 16C650, 16C550, and 16C450.
 IEEE standard: RS-232 Interface
 Max. Speed: Bi-directional speeds from 50 bps to 15Mbps/port.
 2 x DB9 Male
 Support x1,x2,x4,x8,x16（lane）PCI-Express Bus connector keys
 Operating system: DOS, WIN 2000, XP, 2003 Server, VISTA, Win7, Win8.1, Win10, LINUX,
 5V / 12V / RI (no power) power selectable on each individual port (Pin 9th )
 Ready of the Intel and AMD 32/64-bit CPU System
 Built-in 128 byte hardware FIFO
 IRQ and IO address assigned by System
 Certified by Microsoft WHQL, CE, FCC approval
 PCB: 80 x 65 mm

Package Contents

 1 x LINDY PCIe Low Profile 2S Card
 Additional Low Profile DB9 Port Bracket
 LINDY User manual
 LINDY Driver CD

Installation

1. Turn off the power of your computer and remove the power cable

2. Install the PCIe Low Profile card into an available PCIe Low profile slot in your computer

3. Connect the peripheral ie Printer, Modem, etc. to the adapters port

4. Re-connect the power cable & turn on the power of your computer

PCI device listing display (for example…)

If the Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error occurs, please try another
PCI slot.
Once the hardware has installed correctly you can start installing the software from the driver CD.