Lincoln Electric V275-S User Manual

Invertec®V275-S

For Stick and DC TIG Welding

The Invertec®V275-S power source is ideal for the rigors of the construction site. IP23S rated and equipped with weather resistant features, this Stick and TIG power source is designed for outdoor use. Up to 275 amps of output gives you access to a greater number of stick electrodes, and outstanding 6010 performance.

The Invertec 4-pack or 8-pack racks for convenience on the construction site. Standard features such as selectable Hot Start and adjustable Arc Force provide a level of arc control you won’t find anywhere else in this class of machine.

Processes

Stick, TIG, Gouging

V275-S is available as a single unit or mounted in

STICK WELDERS

Note: Plugs not included with Tweco

model.

Output

Input

Advantage Lincoln

• Truly outstanding E6010 and E7018 performance using up to

7/32” diameter electrodes that enables both whip and drag techniques for a variety of construction and fabrication applications.

• Touch-Start TIG®design permits the DC TIG welding arc to be established without high frequency starting.

• Air Carbon Arc cutting and gouging with up to 3/16” (4.8 mm) diameter carbon electrode.

• Adjustable Arc Force and a two-position Hot Start switch provide a level of arc control you won’t find in comparable machines.

TECHNICAL SPECIFICATIONS

Product Product Input Current/ Input Current Output H x W x D Weight

Name Number Power Voltage/Duty Cycle @ Rated Output Range inches (mm) lbs (kg)

Invertec

V275-S K2269-1 208/230/460/575/3/60 275A/31V/35% 38/37/19/16 5-275A 13.6 x 9.0 x 20.25 54.5

Invertec

V275-S K2269-3 250A/30V/60% 34/33/17/14 (345 x 229 x 514) (24.7)

®)(1)

(Tweco

208/230/460/575/1/60 275A/29-31V/35% 68/67/38/31

220/380/400/415/440/3/50 250A/30V/35% 32/20/19/18/17

220/380/400/415/440/1/50 250A/30V/35% 63/42/40/38/36

Rated Output Dimensions Net

200A/28V/100% 27/25/13/11

250A/30V/60% 63/62/33/27

200A/28V/100% 49/48/26/21

200A/28V/100 25/15/15/14/13

200A/28V/100% 48/32/30/29/27

• No de-rating on single phase as with competitive models – get the same performance using single or three phase input.

• Aluminum chassis, protective boots on switches and potted and trayed PC boards for extreme environmental protection.

• Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.

• Three-year warranty on parts and labor. Two-year extended warranty available in U.S.

(1)

Tweco®is a registered trademark of Thermadyne.

Publication E2.161 11/07

www.lincolnelectric.com

A CLOSER LOOK

PERFORMANCE

• Truly outstanding E6010 and E7018 performance that enables both whip and drag techniques for a variety of construction and fabrication applications.

• Selectable Hot Start – Turn it off for thin material or flip it on to get the extra starting amperage you need for thick, rusty or dirty material.

• Variable Arc Force – Dial in the “soft” or “crisp” arc you want as conditions require. A crisper arc can be used to increase penetration or reduce electrode sticking on some applications.

• Touch-Start TIG™ design permits the TIG welding arc to be established without high frequency starting.

FEATURES

• Full-featured MS-style remote capabilities – variable output control using a remote control device such as a foot pedal or hand control.

• 208/230/400/460/575 input volt settings – all-in-one machine. No need to buy separate models for added voltage.

• No single phase de-rating.

Key Controls

• Easy access reconnect panel – two quarter-turn captive screws. No need to remove several panels or machine case to switch input voltages.

• Recessed Control Panel – Provides optimal operating angle and helps protect controls from damage.

Preset Output Amps Control

A A B

“On” Light

Hot Start Control

On/Off Switch

Negative and Positive Output Terminals

(Twist-Mate™ or Tweco®)

Remote Output Control Receptacle - 6-Pin

Arc Control Knob

Mode Selection Switch (Stick/Touch-Start

)

TIG

Local/Remote Output Control

WHAT’S INCLUDED

K2269-1, V275-S Includes:

• Invertec®V275-S (Tweco®)

• Input Power Cable, 10 ft.

• Twist-Mate™ Cable Plugs (K852-70), quantity 2

K2666-1, V275-S (Tweco

• V275-S Tweco®Model power sources (K2269-3), quantity 4

• Inverter Rack

K2666-2, V275-S (Tweco

• V275-S Tweco®Model power sources (K2269-3), quantity 8

• Inverter Rack

• An ideal system to group several inverter power sources in an industrial portable package. Entire system meets National Electrical Code (NEC) standards.

) 4-Pack Inverter Rack Includes:

) 8-Pack Inverter Rack Includes:

[2]

Thermal Protection Indicator

K2666-2, V275-S (Tweco®)

8-Pack Inverter Rack

Invertec®V275-S

www.lincolnelectric.com

+ 2 hidden pages