Lincoln Electric V155-S User Manual 2

Invertec®V155-S

PHASE

STICK WELDERS

Portable. Professional. Rugged. Affordable.

The NEW Invertec®V155-S offers much more than you would expect from a welder this size. Weighing

n at just under 15 lbs. (6.8 kg) the Invertec

i punch of a heavyweight professional that you can take to the most demanding job sites. With 120/230V auto reconnect operation, the Invertec It can also plug into a 200 foot (61 m) 230V extension cord so you can weld just about anywhere. The tough dent resistant case is IP23 rated for outdoor use.

Backed by a 3-Year Lincoln warranty, this tough reliable welder is packed with innovative unique features like built-in Hot-Start stick soft, stick crisp and Touch Start TIG is available in two models: a base unit with stick accessories or a complete Stick/TIG ready to weld package in an Easy-Store/Easy-Carry Suitcase.

Processes

Stick, DC TIG

Advantage Lincoln

• Portable

- 120/230V auto reconnect input power.

- Long 230V extension cord usage - up to 200 ft. (61 m).

- Engine driven power generator capability.

- Weighs less than 15 lbs. (6.8 kg).

• Professional Performance

- Touch Start TIG™DC operation allows you to strike the arc easily without high frequency or tungsten contamination.

- Auto Adaptive Arc Force puddle without compromising arc stability or increased spatter.

- Automatic Hot-Start striking an arc easier.

- Two stick modes, SOFT and CRISP, provide the right arc characteristics for different types of electrodes.

- Ideal for stick welding with popular Lincoln Fleetweld

35, Fleetweld®37, Fleetweld®180 and Excalibur

7018 MR.

™

minimizes electrode sticking in the

™

boosts the current during starting to make

155-S is no lightweight contender. It packs the full

V155-S can operate from a portable generator.

™

, Auto Adaptive Arc Force™,

DC modes. The Invertec®V155-S

• Tough & Rugged

- Dent resistant case is IP23 rated for outdoor use.

- Auto Restore Fuse protects the machine from input over-current and self resets without any difficult fuse changes.

- Fan-As-Needed machine.

- 3-year Lincoln

• Base Unit (K2605-1) Includes

- Invertec®V155-S.

- Stick electrode holder, cable and Twist-Mate™plug.

- Work cable and clamp with Twist-Mate™plug.

- Fully adjustable shoulder strap.

- 120/230V input cord [6.6 ft. (2 m)] with a 120V 15 Amp plug.

electrodes, including

- Extra 120V 20 Amp plug.

™

(F.A.N.™) to reduce noise and dust inside the

Warranty.

hown:

2606-1 Ready-Pak

Output

Input

kg.

TECHNICAL SPECIFICATIONS

Product Product Current/Voltage/Duty Cycle Input Current @ H x W x D Net Weight

Name Number Input Power (104°F, 40°C) Rated Output

Invertec

V155-S and 100A/24.0V/30% Stick 33.8A Max OCV: 75V (288 x 158 x 392) (6.7)

K2605-1 120V/1/50/60 75A/23.0V/100% Stick 24.0A 5-155 Amps DC 11.3 x 6.2 x 15.4 14.7

K2606-1 105A/14.2V/100% TIG 21.5A

230V/1/50/60 100A/24.0V/100% Stick 21.0A

Rated Output Dimensions

(1)

Output Range inches (mm) lbs.(kg)

130A/15.2V/30% TIG 28.8A

145A/25.8V/30% Stick 31.0A 100A/14.0V/100% TIG 14.1A

155A/16.2V/30% TIG 22.8A

(1)

Input amps on 60Hz input.

Publication E2.141 9/07

www.lincolnelectric.com

A CLOSER LOOK

SYSTEM SELECTION

TIG Ready-Pak®Welding Package Order a Lincoln TIG Ready-Pak®Package and get a complete welding package.

Each Package Contains:

• Invertec®V155-S

• Stick electrode holder and cable [10 ft. (3.0 m)] with Twist-Mate™plug

• Work clamp and cable [10 ft. (3.0 m)] with Twist-Mate™plug

• Fully adjustable shoulder strap

• 120/230V input cord [6.6 ft. (2 m)] with a 120V 15 Amp plug

• Extra 120V 20 Amp plug

• Gas Regulator

• PTA-17V TIG torch with Ultraflex™cable and Twist-Mate™adapter

• PTA-17 TIG accessory kit (KP508)

• Easy-Store/Easy-Carry Suitcase

Order:

K2606-1 Invertec®V155-S TIG Ready-Pak®Package

Shown: K2606-1 Ready-Pak®Pkg.

Key Controls

1) Stick/Touch Start TIG

2) Status Lights

3) Output Control

4) Twist-Mate™Connectors

Modes

Touch Start TIG®Mode

Machine has a low open circuit voltage in TIG mode to reduce tungsten contamination. Simply touch the tungsten to the work piece and lift off. The machine will instantly ramp up the voltage and current to establish the arc without the use of high frequency.

Two Stick Modes

Soft Mode

Provides a lower arc force level to deliver a smooth arc with reduced spatter. It provides a clean flat fillet weld with excellent wetting and bead appearance.

For stainless electrodes such as Red

Baron

308L (E308L-16), rutile elec-

Crisp Mode

Provides a more dynamic arc characteristic for welding in all positions.

For cellulosic electrodes such as Fleetweld®35 (E6011).

trodes such as Fleetweld®37 (E6013),

and low hydrogen electrodes such as Excalibur®7018 MR.

[2]

Invertec®V155-S

www.lincolnelectric.com

+ 2 hidden pages