Lincoln MKT (2011) Navigation System [ru]

Download

Navigation System

if equipped

Introduction

System introduction 5 Driving restrictions 6 What is SYNC威?7 Safety information 8 How to get going 9

System overview

Map display options 21 Display voice commands 21 Status bars 22 Home screen 22 Loading pictures 23 Reverse camera 25 Quick reference chart 26 Setting the clock 28

Voice recognition system overview

How to use voice commands 34 Adjusting the voice prompt volume 35 Voice recognition tutorial 37 Tutorial voice commands 37 Voice name tags 38 User profiles 38 User profile voice commands 40

Audio features

AM/FM 43 HD Radio™ 45 Radio voice commands 45 SIRIUS威 satellite radio voice commands 52 Satellite radio 52 CD 55 CD voice commands 58 Playing a DVD in the system 58 DVD voice commands 60 Video CD voice commands 60

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Table of Contents

Disc voice commands 61 Jukebox features 61 Recording (saving) music to your jukebox 61 Accessing the music in your jukebox 62 Creating a playlist 64 Jukebox voice commands 66 User Device (if equipped) 68 Rear DVD voice commands 70 DVD (if equipped) 70

Climate features (if equipped)

Climate voice commands 74

Information menu

Where am I? 75 Hybrid information 75 SIRIUS威 Travel Link™ 83 SIRIUS威 Travel Link™ voice commands 87 Accessing your calendar 88 Accessing the help screen 89

Sound menu features

Setting a destination

Setting a destination by voice 94 Quick destination options 95 Standard destination options 96 POI categories 102 Route selection 108 Destination voice commands 110 Quick touch buttons 113 Map icons 114

Navigation route preferences

117

Map preferences 119 Route preferences 120 Navigation voice commands 124

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Table of Contents

General Information

Map updates 125 Navigation end user license agreement 125 Glossary 131

SYNC姞 phone features (if equipped)

Quickstart - How to get going 135 Pairing your phone through your navigation system 135 Making a call 137 SYNC威 phone features 138 Accessing your phone book 139 Call history 140 System settings 140 Adding (pairing) a phone 141 Connecting a phone 142 Deleting a phone 142 Advanced settings 143 Turning Bluetooth on/off 144 911 assist™ 145 Vehicle health report 149 Setting a ring tone 153 Message notification 154 Automatically download your phone book 155 Modifying your phone book and call history 156 Turning prompts on/off 158 Returning to factory defaults 159 Performing a master reset 159 Installing new vehicle applications 160 Accessing SYNC威 system information 161 SYNC Apps 162 Traffic, Directions and Information 167 Text messaging with your navigation system 169 Forwarding a text message 173 Voice commands in phone mode 174

125

135

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Table of Contents

SYNC姞 media features (if equipped)

Connecting your digital media player to SYNC威 177 SYNC威 media features 178 What’s playing? 179 Supported player, media formats and metadata information 179 Accessing and using your USB port 179 Streaming music from your phone 180 Using the Auxiliary input jack (Line in) 181 Using the play all feature 182 Selecting and playing specific artists 183 Selecting and playing specific albums 184 Selecting different genres 185 Accessing your playlists 185 Playing a specific track 186 Exploring the USB device 186 Accessing BT devices 187 Adding a new device in discovery or discoverable mode 188 Voice commands in media mode 189

SYNC姞 End user license agreement

Index

177

191

199

All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Introduction

MOBILE MEDIA NAVIGATION SYSTEM

Your vehicle is equipped with a mobile media navigation system which allows you to listen to, record and save music, play DVDs (audio and video), navigate the vehicle and operate climate control functions (if equipped).

Your system has a large range of features, yet is easy to use. The display screen is the primary means for operating the system through the use of its vertically tabbed menus, text screens and menu displays. Screen selections are made by touching the desired selection on the touch screen. The “tabs” along the left side of the screen represent the major components of the system. The status bars at the top and bottom of the screen will stay present for the majority of the time once the system is turned on and ready for operation. The top status bar will contain menu names, icons, and a clock. The lower status bar contains climate information (if equipped), icons and advisory messages. Please refer to Status bars in the System Overview chapter for more information. Navigation guidance is shown on the display touch screen and is supplemented with voice prompts.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Introduction

DRIVING RESTRICTIONS

In order to prevent the navigation system from distracting you while driving, access to certain functions are restricted when the vehicle is traveling above 5 mph (8 km/h). At this time, only the Quick Destination menu items are available for destination entry. Restricted functions include:

• Touchscreen keyboard during destination entry (Street address, POI, Freeway Entrance/Exit, Intersection)

• Scrolling of long lists

• Travel Link subscriptions (if active) such as movie times, ski

conditions, sports scores and scrolling of the weather map

• Editing/Adding entries in the Address Book

• Editing/Adding entries in the Avoid Areas List

• Jukebox restrictions such as creating/editing playlists, sorting playlists,

editing track, artist and album names

• Uploading photographs

Note: If your vehicle is equipped with SYNC威, similar features will be restricted also.

When the vehicle begins to move, and the Select Route Screen is shown, the highlighted route is automatically selected and guidance begins. When the vehicle speed is reduced to 5 mph (8 km/h) or less, system restrictions are lifted and you have full access to the system.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Introduction

SYNC姞 (IF EQUIPPED)

SYNC威 is a hands-free communications and entertainment system that literally ‘syncs up’ with all other multimedia systems in your vehicle. SYNC威 delivers convenience with voice activated calling and hands-free conversations, digital media player command and control as well as easy to use voice commands. The world outside your vehicle cabin may be chaotic, but inside, with SYNC威, it’s always a smooth ride. All you have to do is sync it and stow it. We’ll take care of the rest.

Welcome to the new world of ingenuity and passion - technology that is both fun and functional. Welcome to SYNC威.

Please visit www.SyncMyRide.com.

SYNC姞 features

SYNC威 offers a variety of phone and media features, such as:

• Send and receive hands-free calls

• Play your digital music through voice activated commands

• Use voice recognition to access your cell phone’s contact list

• Transfer an active phone conversation to a hands-free environment

• Play music stored on your digital media player

• Use your device while charging through the USB port

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Introduction

• Listen to music streaming from your Bluetooth威 enabled cellular phone

• Advanced voice recognition system fluent in English, French and Spanish

SAFETY INFORMATION

WARNING: Driving while distracted can result in loss of vehicle

control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road. Your primary responsibility is the safe operation of the vehicle. We recommend against the use of any handheld device while driving and that you comply with all applicable laws.

• Do not attempt to service or repair the system. See your authorized dealer.

• Do not operate playing devices if the power cords and/or cables are broken, split or damaged. Carefully place cords and/or cables where they will not be stepped on or interfere with the operation of pedals, seats and/or compartments, or safe driving abilities.

• Do not leave playing devices in the vehicle in extreme conditions as it could cause damage to your device. Refer to your device’s user guide for further information.

• For your safety, some functions are speed dependent and cannot be performed when the vehicle is traveling at speeds 5 mph (8 km/h) and below.

• Ensure that you review your device’s user guide before using with SYNC威.

PRIVACY INFORMATION

When a cellular phone is connected to SYNC威, SYNC威 creates a profile within your vehicle that is linked to that cellular phone. This profile is created in order to offer you more cellular features and to operate more efficiently. Among other things, this profile may contain data about your cellular phone book, text messages (read and unread), and call history, including history of calls when your cell phone was not connected to SYNC威. In addition, if you connect a media device, SYNC威 creates and retains an index of media content supported by SYNC威. SYNC威 also records a short development log of approximately 10 minutes of all

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Introduction

recent SYNC威 activity. The log profile and other SYNC威 data may be used to improve SYNC威 and help diagnose any problems that may occur.

The cellular profile, media device index, and development log will remain in the vehicle unless you delete it and are generally accessible only in the vehicle when the cellular phone or media player is connected. If you no longer plan to use SYNC威 or the vehicle, we recommend you perform a Master Reset to erase all information stored in SYNC威.

SYNC威 data cannot be accessed without special equipment and access to the vehicle’s SYNC威 module. Ford Motor Company and Ford of Canada will not access SYNC威 data for any purpose other than as described absent consent, a court order, or where required by law enforcement, other government authorities, or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada. For further privacy information, see the sections on 911 Assist™ (if equipped), Vehicle Health Report (if equipped), and Traffic, Directions and Information (if equipped).

VOICE RECOGNITION

Your navigation system is equipped with a voice activated feature which allows you to “speak” certain commands to the system. For further information, please refer to the Voice recognition chapter. You can also press

QUICK START

and say a command or “Help” after the prompt.

WARNING: Driving while distracted can result in loss of vehicle

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Introduction

TO PLAY A RADIO STATION

1. Ensure that the navigation system is on.

2. Press the RADIO hard button.

3. Select the ‘AM’ or ‘FM’ tab on the touchscreen.

• Turn the TUNE knob to the right/left to go up/down the frequency band in individual increments.

• Or, press SEEK to find the next strong station up/down the frequency band.

Note: If RDS is ON and PTY (Program type) is selected, the station selection will be limited to that specific genre. In satellite radio mode (if activated), seek is limited to the selected genre.

TO PLAY SATELLITE RADIO (IF ACTIVATED)

1. Ensure that the navigation system is on.

2. Press the RADIO hard button on the navigation system.

3. Select the ‘SAT’ tab on the

touchscreen. (If your vehicle is equipped with Satellite Radio, the SAT tab will be present on the radio screen).

For further information on Satellite Radio, refer to Satellite Radio in the Audio Features chapter.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Introduction

TO LOAD A CD OR DVD:

1. Insert a CD or DVD into the slot.

2. A CD will begin to play. A DVD will play audio and video if the vehicle is in Park (P). Otherwise, only the audio will play.

3. Use the touch controls on the screen to advance tracks, scan, pause, view the track list, etc.

TO PLAY A PREVIOUSLY LOADED CD OR DVD:

1. Ensure that the navigation system is on.

2. Press the MEDIA hard button on the navigation system.

3. Select CD/DVD tab on the touchscreen (if there is not a CD or DVD loaded into the system, the tab will be disabled and NO DISC will appear in the Status Bar when you try to select it).

4. A CD will begin to play. A DVD will begin to play audio and video if the vehicle is in Park (P). Otherwise, only audio will play.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Introduction

TO SET A DESTINATION USING THE NAVIGATION SYSTEM:

1. Ensure that the navigation system is on.

2. Press the DEST hard button on the navigation system.

3. Select the ‘Standard’ tab on the

touchscreen and then press ‘Street Address’ to enter a specific street address as your destination. (From this screen you can also choose POI, Address book entry, previous destination, Phone number, Freeway Entrance/Exit , Map or intersection as your destination).

4. Enter the required information.

Please note that:

• The system uses a Smart Speller, which helps facilitate entering information through the keyboard.

• Accented characters in English, Spanish and French are converted internally to non-accented characters for search purposes.

5. The screen will show the point entered on a map. If this is the

intended destination, press ‘Set As Dest’. A message will pop up while the system is computing the route.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Introduction

6. Select the desired route on the right hand side of the screen. There will be up to three routes possible (fastest, shortest and unrestricted) from which to choose, each highlighted with a different color. For each route, the overall distance, route conditions and the estimated travel time are displayed.

7. Press ‘Start Route’ and follow the instructions.

TO PLAY A PREVIOUSLY LOADED DVD IN THE FAMILY ENTERTAINMENT DVD SYSTEM (IF EQUIPPED)

1. Press the MEDIA hard button on the navigation system.

2. Press the Rear DVD A or Rear DVD B tab to access the desired monitor system.

The previously loaded DVD will begin to play in the system.

USING SYNC姞 (IF EQUIPPED)

Your vehicle may be equipped with SYNC威 — a hands-free communication and entertainment system which allows you to connect and use a portable media player through a USB port located in your vehicle, pair a Bluetooth威 enabled cellular phone, and operate these devices through your vehicle. Please refer to the SYNC威 media chapter for more information on using portable media players with SYNC威 and refer to the SYNC威 phone chapter for information on pairing your Bluetooth enabled cellular phone and using the phone features.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

FORD AND MERCURY SYSTEM

LINCOLN SYSTEM

Note: If your navigation system does not appear as one of the systems above, please refer to Navigation system in the next section.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

WARNING: Driving while distracted can result in loss of vehicle

1. I (Information): Press I to access the information menu. Press while the information menu is active to step through the information tabs of: Where am I?, HEV (if equipped), SIRIUS威 Travel Link™ (if activated), the Calendar, System Info (System Information) and Help.

2. PHONE: Press PHONE to access the phone menu (if equipped with SYNC威).

3. CLIMATE: Press CLIMATE to access the climate menu. Press the button while the climate menu is active to step through the climate menu tabs of Front Zone and Rear Zone (if equipped).

(Eject): Press (Eject) to

4. eject the disc in the slot.

5. TUNE: In radio or satellite radio mode (if activated), turn to advance in individual increments up/down the frequency/channel listing.

In MP3 mode, turn to advance to the next/previous folder. RPT: In navigation mode, press the knob in while navigation guidance

is active to repeat the last spoken navigation guidance prompt.

6. DISP: Press the DISP button to step through the following display modes: On, Status Bar Only, and Off.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

7. SOUND: Press SOUND to access the sound menu. Press while the sound menu is active to step through the sound menu tabs of Bass/Treble, Balance/Fade, SCV (Speed compensated volume), DSP (Digital Signal Processing) and the Visualizer.

8. SEEK:In radio and satellite

radio mode (if activated),

press previous/next available station or channel within the currently selected

Category/Genre. In CD/DVD mode, press chapter.

9. MEDIA: Press MEDIA to access the media menu. Press while the media menu is active to step through the available media sources of CD/DVD, Jukebox, User Device and Rear DVD access (if equipped).

10. RADIO: Press RADIO to access the radio menu. Press while the radio menu is active to step through the available radio sources of AM, FM1, FM2, SAT1, SAT2, and SAT3 (satellite radio, if activated).

11. VOL (On/off/volume): Press to turn the audio system on/off. Press and hold to turn the navigation radio completely off. Turn to adjust the volume of the audio system or the navigation voice prompts as they are being given. Note: If a route is active when the navigation system is turned off, the route is resumed when the system is turned on again.

12. Memory presets:In radio and

satellite radio mode (if activated): Press 1-6 to access

your previously saved preset stations/channels. To save to a preset: Tune to the desired station/channel. Press and hold the desired preset button in which you would like to store the station/channel. The sound will momentarily mute and then return when the preset is saved.

/ to seek to the

/ to access the previous/next track or

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

13. MENU: Press MENU to access the system menu. Press while the system menu is active to step through the system menu tabs of Display, Clock, Feedback Settings, System Settings and Valet Mode.

14. MAP: Press MAP to access the navigation map. Press while the map display is active to center the map on the current vehicle position. Press while the map display is active and a route is active to step through the different map guidance views.

15. DEST: Press DEST to access the navigation destination entry menu. Press while the navigation destination entry menu is active to show additional destination entry techniques.

16. NAV: Press NAV to access the navigation menu. Press while the navigation menu is active to step through the navigation menu tabs.

17. CD/DVD slot: Insert a CD or DVD, label side up.

After the system initializes, the screen will be divided in two sections:

• Status bars: This is the top and bottom portion of screen that displays the clock or date and useful information, depending on the current mode.

• Display area: The interactive screen that is activated by finger touch and changes depending on current system operation. Graphical buttons are displayed in this area depending on the current screen for you to make choices.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

Navigation system

Note: If your navigation system does not appear as this system, please refer to the previous section.

WARNING: Driving while distracted can result in loss of vehicle

1. Memory presets: In radio and

satellite radio mode (if activated): Press 1-6 to access

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

2. CD/DVD slot: Insert a CD or DVD, label side up.

(Eject): Press (Eject) to

3. eject the disc in the slot.

4. TUNE: In radio or satellite radio mode (if activated), turn to advance in individual increments up/down the frequency/channel listing.

In MP3 mode, turn to advance to the next/previous folder. RPT: In navigation mode, press the knob in while navigation guidance

is active to repeat the last spoken navigation guidance prompt.

5. MAP: Press MAP to access the navigation map. Press while the map display is active to center the map on the current vehicle position. Press while the map display is active and a route is active to step through the different map guidance views.

6. DEST: Press DEST to access the navigation destination entry menu. Press while the navigation destination entry menu is active to show additional destination entry techniques.

7. NAV: Press NAV to access the navigation menu. Press while the navigation menu is active to step through the navigation menu tabs.

8. I (Information): Press I to access the information menu. Press while the information menu is active to step through the information tabs of: Where am I?, HEV (if equipped), SIRIUS Travel Link (if activated), the Calendar, System Info., and Help.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

9. PHONE: This control is not operational.

10. DISP: Press the DISP button to step through the following display modes: On, Status Bar Only, and Off.

11. SEEK:In radio and satellite

radio mode (if activated),

Press previous/next available station or

channel within the currently selected Category/Genre. In CD/DVD mode, press chapter.

12. MENU: Press MENU to access the system menu. Press while the system menu is active to step through the system menu tabs of Display, Clock, Feedback Settings, System Settings and Valet Mode.

13. SOUND: Press SOUND to access the Sound menu. Press while the sound menu is active to step through the sound menu tabs of Bass/Treble, Balance/Fade, SCV (Speed compensated volume), DSP and the Visualizer.

14. MEDIA: Press MEDIA to access the media menu. Press while the media menu is active to step through the available media sources of CD/DVD, Jukebox, User Device and Rear DVD screens (if equipped).

15. RADIO: Press RADIO to access the radio menu. Press while the radio menu is active to step through the available radio sources of AM, FM1, FM2, SAT1, SAT2, and SAT3 (satellite radio, if activated).

/ to seek to the

/ to access the previous/next track or

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

16. VOL (On/off/volume): Press to turn the audio system on/off. Press and hold to turn the navigation radio completely off. Turn to adjust the volume of the audio system or the navigation voice prompts as they are being given. Note: If a route is active when the navigation system is turned off, the route is resumed when the system is turned on again.

After the system initializes, the screen will be divided in two sections:

• Status bars: This is the top and bottom portion of screen that displays the clock or date and useful information, depending on the current mode.

SCREEN DIFFERENCES

Depending on your vehicle line and option package, your screen may vary in appearance from the screens shown in this supplement. These differences could include: background color, tab options, climate controls and other features. Your features may also be limited depending on your market. (For example, SIRIUS威 Travel Link™ is only available in the continental United States). Please check with your authorized dealer for availability.

Display options

You can choose to turn your screen on/off and also if you would like to view the status bars on the top and bottom of the screen. To access:

Press DISP repeatedly to cycle through these options.

Voice commands in display mode (if equipped)

While in display mode, press controls. When prompted, you may say any of the following commands:

• Display on • Auto

• Day • Night

• Status bar • Display off

• Brighter • Dimmer

• Help

Note: If you are not in display mode, press wheel controls. When prompted, say, “Display mode” and then any of the above commands.

or VOICE on the steering wheel

or VOICE on the steering

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

STATUS BARS

Your screens may have status bars on the top and bottom of each screen. The status bar on the top of the

screen will tell your current mode, the exterior temperature, the time as well as display icons if you have enabled Bluetooth, or are using headphones with your Rear overhead mounted Family entertainment DVD system among other options.

The status bar on the bottom of the screen may list the Home icon, the current temperature selected for the Driver and Passenger as well as the fan speed and air flow direction, the current mode being used (if equipped), the Artist and Title of the currently playing CD (if available), Artist and Title for Jukebox (if available) and satellite radio (if activated).

Note: As climate controls are vehicle dependent, some vehicles may not display climate readings in the status bar.

HOME SCREEN

Your system has a Home Screen where you can save/view favorite pictures, view your current audio and climate control settings as well as display the audio visualizer or the hybrid fuel economy (if equipped). You can split the screen in to two or three different sections, or you can choose to have one main view.

To access your home screen, press the house icon ( left hand corner of any screen.

The left side of the screen will display an uploaded photo or the map screen. The right side can also display the uploaded photo. The upper right panel will only display the current audio settings. The lower right panel displays the vehicle’s climate settings (if equipped), the visualizer or the hybrid fuel economy (if equipped). Press the left or right side.

on the bottom of the display to access the settings screen for

)atthebottom

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

Loading pictures

Your system allows you to save and view up to 32 photos. To access:

1. Ensure that you are on the Home

Screen. (Press left of any screen to access.)

2. Touch the left side of the home

screen to initiate the left screen photo display and saved photos screen.

3. Select the ‘Add’ button on the

touchscreen. The following disclaimer will appear, “Please confirm the supported photo formats”.

4. When the pop-up dialog box with

the disclaimer appears, press OK and ensure that you are using the proper format.

5. Insert a CD-ROM which contains

your photos as jpegs.

6. Press OK. The photos will be

listed on the right half of the screen.

7. Select either ADD or ADD ALL.

The photos are now saved to the hard drive. Photo display limitations:

• The file must be 1.5MB or less.

• The extension of the file must be one of JPE/JPG/JPEG.

• The CD or DVD must be ISO 9660 format, UDF format is not

supported.

• The file path must be 255 characters or less.

at the bottom

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

• Up to 256 files or folders can be displayed in one folder.

• Not compatible with discs written in Packet Write mode.

• Only the photograph(s) which meet these conditions will be displayed.

Note: When burning a CD, ensure that you ‘close’ or ‘finalize’ the disc when the CD-burning process finishes (you should select this option before you start burning). Consult your software manual or the program’s help files if you’re not sure how to finalize the disc. Also, write the audio data into the first session of a multi-session CD as audio systems won’t be able to sort through other sessions to find more audio tracks.

Editing and deleting photos

1. Press

2. Touch the current photo on the home screen.

3. To edit the photo:

• Select the Edit button.

• Adjust the photo by zooming in or out, moving right, left, up or down

and also rotating left or right.

• Press the Reset button to return to the original image.

4. To delete the photo, select the Delete button.

5. To delete all stored photos:

• Press the Menu hard button.

• Select the System Settings tab on the touchscreen.

• Press the View button for Delete Stored Items.

• Select Saved photos.

to access the home screen.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

REVERSE CAMERA (IF EQUIPPED)

Your vehicle may be equipped with a reverse camera on the tailgate which provides a video image of the area behind the vehicle. When the transmission is in R (Reverse), an image will automatically display on the navigation screen. Once the vehicle is back in D (Drive), the image will continue to display until you are driving over 5 mph (8 km/h). To remove this image from the screen, press any hard button on the navigation system.

When the vehicle is in P (Park), press SETTINGS to make adjustments to the brightness of the display as well as the rear camera display.

When the rear camera delay function is ON, it extends the display of the camera image into Drive mode until vehicle speed is greater than 5 mph (8 km/h). This is useful when trying to engage/disengage a trailer. Once you shift out of R (Reverse), the image will be removed from the screen. The default for the rear camera delay is off.

Prior to using, ensure that the camera lens is clear of any debris, mud, etc. and that both reverse lamps are operational if using at night.

Depending on your vehicle, you may have a Zoom button (if equipped) as well as additional selections under the Settings button.

For complete information, refer to Rear-view Camera System in the Driving chapter in your Owner’s Guide.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

QUICK REFERENCE CHART

SYNC威 works with your navigation system, DVD system (if equipped), voice commands and also through your steering wheel controls. Below is a quick listing of the functions of some steering wheel controls and navigation system controls.

Navigation

bezel control

N/A

N/A VOICE

SEEK ,

N/A OK Press to confirm your selection. MEDIA N/A Press repeatedly to access all

PHONE N/A Press to access SYNC威 PHONE

Steering wheel

control

Function

Press to answer an incoming call. Press to send a call or text message (if supported). Press and hold to end a call. Press it initiate a redial.

Press to activate Voice Recognition. Press and hold to end an active voice session. Refer to the Voice recognition system overview chapter for further information.

Press to access the previous/next preset radio station, preset satellite channel (if activated) or CD track. Press and hold to seek to the next satellite channel (if activated).

available media sources in your vehicle such as: CD, DVD, Jukebox, Rear Zone, Rear DVD (if equipped) Line In, and User Device (if equipped with SYNC威).

features.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

SYSTEM MENU FEATURES

Your system has many menu features such as allowing you to adjust the touchscreen brightness, adjusting the time and languages, adjusting the feedback and system settings. To access, press the MENU hard button on the navigation system.

Display options

1. Press the MENU hard button.

2. Select the ‘Display’ tab on the

touchscreen. Select from the following display options:

Brightness: Select AUTO DIM to manually adjust the brightness by pressing + or —.

Contrast: Press + to increase and — to decrease the level of contrast on the screen.

Day/Night Mode: Select ‘Day’ to always display day mode or ‘Night’ to always display night mode. Select ‘Auto’ for the screen to automatically change between day and night mode.

Color Palette (Available on Lincoln vehicles only): Select between four different background colors: 1. Black, 2. Blue, 3. Green, 4. Red.

Daytime color: Press to select Light color or Dark color for the screen lighting.

Note: When the headlamps are on under high ambient light conditions, the system will remain in day mode, even if night is selected.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

Setting the clock

1. Press the MENU hard button.

2. Select the ‘Clock’ tab on the touchscreen. Select from the following display options:

Time set buttons: To set the time, press +, — to increase/decrease the time and select AM or PM.

Display clock: Press to turn the clock display on/off. Format: Press to select between 12 hour and 24 hour format. Auto time zone: If enabled, the system will automatically adjust the

time when you enter into a new time zone. If disabled, you will have to manually adjust the time when entering different time zones. Note: The system does not implement daylight savings time.

Restore defaults: Select ‘Reset’ to reset to the default settings. Note: If your vehicle is equipped with an in-dash analog clock, you can

set the time on this screen but it may not appear in status bar for viewing purposes.

Feedback settings

1. Press the MENU hard button.

2. Select the ‘Feedback Settings’ tab on the touchscreen. Select from the following display options:

Voice recognition user profile: You can ‘train’ the system to better recognize your voice. Two profiles can be created. Refer to the Voice Recognition section for more information.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

Button tone: Select to select/adjust when the system will sound a tone. Press ‘Button tone’ to then select from:

• All Buttons: Select to have the system sound a tone when any hard or soft key is touched.

• Touch Screen: Select to have the system only sound a tone when a selection is made on the touch screen.

• Off: Select to turn off all tones.

Voice volume: Press + to increase or — to decrease the volume level of

the navigation voice. Voice volume adjustment also includes the volume level of chimes.

Voice recognition interaction mode: This feature determines the level of interaction/feedback you will receive from the system.

• Standard: This is the default setting. The ‘Standard setting’ provides you with the most interaction / feedback in the form of prompts.

• Advanced: This feature has less prompts and feedback.

Voice recognition confirmation:

• On: Select to have the system always ask to confirm/verify a command.

• Off: Select to have the system ask less frequently to confirm /verify a command.

System settings

1. Press the MENU hard button.

2. Select the ‘System Settings’ tab

on the touchscreen. Select from the following display options:

Language: Select between ‘English’, ‘Francais’ or ‘Espanol’. Units: Select between ‘English’ and ‘Metric’. Keyboard layout: Select ‘ABC’ or ‘QWERTY’ for the keyboard layout in

the display.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

Delete stored items: Select ‘View’ to see what areas contain stored items. You can then choose to delete all of the entries from these ’areas’ : Address Book, Previous Destinations, Avoid areas, Saved Photos and Voice Recognition Profiles.

Restore factory default settings: Press ‘Reset’ to return to the factory default settings.

Valet Mode: Press to access Valet Mode.

• Enable Valet Mode: Select to lock the system with a four digit PIN. The same PIN must be entered to unlock the system and disable valet mode.

Valet mode

1. Press the MENU hard button.

2. Select the ‘Valet Mode’ tab on the

touchscreen. Press ‘Enable Valet Mode’.

3. Enter a four digit Personal

Identification Number (PIN) and press ‘Enter’. The system will ask you to re-enter the PIN. Once entered, select ‘Enable’ to activate Valet mode. The system is then locked until the correct four digit PIN is entered.

Note: The PIN can be reset by simultaneously pressing and holding presets 1 and 5 while on the PIN entry screen. After approximately five seconds, the system will transition to the Valet mode screen indicating that the PIN is reset. Once you have reset the PIN, the system will then allow you to set a new PIN.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

System overview

SYNC姞 audio voice control

This feature allows you to set the system to automatically listen for USB or SYNC voice commands first, if desired. This eliminates the need to say “USB” or “User Device” before any of the SYNC media commands.

When ‘On’ is selected, you do not need to say, “USB” or “User Device” first to control a connected USB device.

When ‘Off’ is selected, you will need to say, “USB” or “User Device” before all SYNC commands.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Voice recognition system overview

VOICE RECOGNITION

Your vehicle may be equipped with an advanced interactive Voice Recognition (VR) system. This system allows you to perform many operations such as operating the navigation, audio, phone (if equipped), media, climate (if equipped), display and voice settings by “speaking” certain commands. The system will respond with a series of audible tones, prompts, questions and spoken confirmations depending on the situation and the chosen level of dialogue interaction.

Feedback through audible tones

Your VR system will respond through various audible tones. You may hear a tone at the following times:

• When you press VOICE or

• When you access the help feature.

• When the VR system does not understand your request

• When a VR session is completed successfully

• When a VR session is ended unsuccessfully

• When a speed dependent feature has been accessed

• When a new device is connected

The navigation system has five different audible tones that will play depending on the circumstance.

• Initial: Sounds when you are entering a new mode.

• Positive: Sounds for a positive recognition or a successful VR session

completion.

• Negative: Sounds for a negative recognition, an unsuccessful VR session, or when a speed dependent feature has been accessed.

• Listening: Sounds when the system is ready to listen for a command.

• Help: Sounds when you ask for ’Help’.

on your steering wheel controls.

Confirmation prompts

Confirmation prompts are short questions asked by the system when the system has not clearly understood your request or when there are several possible responses to your request. For example, if you have Confirmation prompts ON, the system may say, “Phone, is that correct?”. The system will then listen for a “Yes” or “No” confirmation from you. If you say “Yes”, the system will proceed. If you say “No”, the system will ask you to say the command again. If you have Confirmation prompts

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Voice recognition system overview

OFF, the system may assume it understood your request or may ask you to repeat your request. If the system is unsure of what was asked, it will prompt you to try again or ask for help. Note: Even with Confirmation prompts turned OFF, you may be asked to confirm certain settings occasionally.

HOW TO USE VOICE COMMANDS WITH YOUR SYSTEM

Press Recognition. Depending on the feedback setting, you will hear the prompt, “Please say a command” followed by a tone, or you will hear a tone, signaling that the system is ready to accept your command. Any command spoken prior to the beep will not register with the system. Speak the command clearly to ensure that the system is able to recognize and perform the desired function. You can, at any time, press

The main categories of your voice commands are as follows:

• Navigation • Climate (if equipped)

• Audio • Jukebox

• Radio • Display mode

• User profile • Disc

• CD • DVD

• Video CD • Line in

• Phone (if equipped) • Rear DVD (if equipped)

• Voice settings • USB (if equipped)

• Dial (if equipped) • Bluetooth audio (if equipped)

• Tutorial • Confirmations

To access a list of all available voice commands:

1. Press the i button (

2. Select the ‘Help’ tab on the touchscreen.

3. Select ‘Voice commands’ at the top of the screen.

4. Select the desired category.

or VOICE on your steering wheel controls to activate Voice

or VOICE and say “Help” for a list of possible commands.

) on the navigation system.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Voice recognition system overview

Voice recognition visual feedback

When Voice recognition (VR) is activated, the following icons will appear in the status bar.

VR State VR Icon

Main Menu/Generic VR recognition failure VR session unsuccessful Listening Listening paused

Speaking instructions

For the best voice recognition, please ensure that:

• The interior of the vehicle needs to be as quiet as possible. Wind noise from open windows and road vibrations may prevent the system from correctly recognizing voice commands.

• Press speaking a command.

• Speak naturally without large pauses in between words.

• Speak louder if background noise is preventing the system from

recognizing your command

• Only one person should speak while the system is listening for a command.

• Please realize voice recognition performance is not 100% and varies by user. The voice recognition system is meant to be a secondary convenience control and if it doesn’t operate optimally, you can still operate your system via the touch screen and hard buttons.

To speak voice commands:

Depending on the feedback setting, the system will respond differently. If the feedback settings are set to ‘Standard’, the system will respond with a tone, a prompt and another tone. If the feedback settings are set to Advanced, the system will respond without a prompt and with tones only.

1. Press

2. The system will say, “Please say a command” and VOICE/Main Menu

and 34

or VOICE and wait until the second tone sounds before

or VOICE on the steering wheel. A tone will sound.

will appear in the status bar.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Voice recognition system overview

3. A tone will sound and the ’Listening’ icon will appear in the status bar signifying the system is ready for your command.

4. Speak your command loudly and clearly.

5. If the system is not confident that it recognized the command, it will ask you for confirmation. If the system does not recognize or hear your voice command, it will say, “Sorry, please say a command or say Help” and will allow you to repeat the voice command. The ’voice failed’ icon will appear in the status bar.

6. If the system does not recognize or hear your voice command a second time, the system will say, “Sorry, please say a command” and will allow you to repeat the voice command. The ’voice failed’ icon will appear in the status bar.

7. If the system doesn’t recognize or hear your command a third time, the voice session is terminated.

8. Once the system does understand your command, (and the feedback settings are set to standard), a tone will sound and the system will say, “<Command> Please say a command.” VOICE/Command and appear in the status bar.

9. The listening tone will sound and the appropriate voice menu name and the listening icon will appear in the status bar as the system waits for your response. Speak the command clearly and loudly.

10. This sequence of events occurs until the voice recognition session is complete.

will

ADJUSTING THE VOICE PROMPT VOLUME

There are three different ways you can adjust the voice volume:

• When the system is speaking, turn the volume knob to decrease or increase the volume.

1. Press the MENU hard button.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Voice recognition system overview

2. Select the ‘Feedback Settings’ tab.

3. Press + to increase or — to decrease the voice volume levels.

1. Press by the prompt, “Please say a command.” Another tone will sound signaling the system is ready to accept your command.

2. Say “Voice volume decrease” or “Voice volume increase”.

Voice feedback / interaction

You can adjust the level of interaction and feedback you would like from your voice recognition system. There are four different levels varying from the most interaction/feedback to the least.

Standard Interaction Mode with Confirmation Prompts on: This selection provides the most feedback and guidance from the system. You will be prompted to say a command. The system will repeat your command and ask, “Is that correct?”

Standard mode with prompts off: This selection offers the second highest level of feedback with the system. You will be prompted to say a command. If the system is not certain of your command, the system will repeat your command and ask, “Is that correct?”

Advance mode with prompts on: You will be prompted by two tones. If the system is not certain of your command, the system may repeat your command and ask, “Is that correct?”.

Advance mode with prompts off: This selection provides the least interaction with the system. You will be prompted by two tones. You will rarely be asked to confirm your command.

Standard interaction mode provides more detailed interaction and guidance with confirmation prompts while the advanced mode has less audible interaction and more tone prompts. Confirmation prompts are short questions asked by the system when the system has not clearly heard or understood your request. Tone prompts are audible sounds signifying the system has entered a mode or is waiting for your command.

or VOICE on the steering wheel. A tone will sound followed

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Voice recognition system overview

To access these settings:

1. Press the MENU hard button on the navigation system.

2. Select the ‘Feedback Settings’ tab

on the touchscreen to make adjustments.

VOICE RECOGNITION TUTORIAL

Your system has three different tutorials to help you become better acquainted with the voice recognition system. There are as follows:

• Lesson one: What you can do with speech

• Lesson two: How we’ll work together

• Lesson three: Getting accustomed to the system

To access:

1. Press

A tone will sound and the system will prompt you, “Please say a command.”

2. After the tone, say “Tutorial”. The system will begin with Lesson 1.

3. To listen to a different lesson, press

one of the voice commands on the screen.

Tutorial voice commands

While listening to the tutorial lessons, press steering wheel controls and after the tone, you may say any of the following commands:

• Lesson 1 • Lesson 2

• Lesson 3 • Next Lesson

• Previous Lesson • Help

Note: If you are not in tutorial mode, press steering wheel controls. When prompted, say, “Tutorial” and then press the above commands.

or VOICE on the steering wheel.

on the steering wheel and say

or VOICE on the

or VOICE on the steering wheel controls again to say any of

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Voice recognition system overview

VOICE NAME TAGS

Your voice recognition system includes a feature which allows you to enter personal names for locations. These are called ’voice name tags’. You can assign voice name tags to all locations entered in your Address Book and then use them as destinations. Press

steering wheel controls and say, “Destination <nametag>” after the tone.

CREATING A USER PROFILE

You can create user profiles in your voice recognition system to help train the system to fine tune its listening to a specific person (voice). To access:

1. Press the MENU hard button on the navigation system.

2. Select the ‘Feedback Settings’ tab on the touchscreen.

3. Select ‘Edit’.

4. Select ‘Create’ to create either Profile 1 or Profile 2.

5. Follow the voice prompt instructions.

CREATING A USER PROFILE USING VOICE RECOGNITION

1. Press

or VOICE on the steering wheel. A tone will sound and the system will say, “Please say a command”. Another tone will sound signaling the system is ready for your command.

2. Say “User Profile”.

VOICE/User Profile and icon will change to the listening icon (

will appear in the status bar and then the

Listening

3. Say “Create”.

VOICE/User Profile and icon will change to the listening icon (

will appear in the status bar and then the

Listening

4. Say “User Profile 1” or “User Profile 2”.

5. Follow the voice prompts. Once a user profile has been created, it will then become the active user

profile in the system.

or VOICE on the

Selecting a user profile

1. Press the MENU hard button on the navigation system.

2. Select the ‘Feedback Settings’ tab on the touchscreen.

3. Select the ’Profile 1’ or ’Profile 2’ icon. 38

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Voice recognition system overview

Selecting a user profile using voice recognition

1. Press system will say, “Please say a command”. Another tone will sound signaling the system is ready for your command.

2. Say “User Profile”. VOICE/User Profile and

icon will change to the listening icon (

3. Say “Select”.

4. Depending on the chosen level of feedback, you will need to select which user profile.

Editing a user profile

1. Press the MENU hard button on the navigation system.

2. Select the ‘Feedback Settings’ tab on the touchscreen.

3. Scroll down and select ‘Edit’.

4. Select ‘Continue’ to edit either Profile 1 or Profile 2.

5. A pop-up window will appear to confirm and the system will prompt “This profile has been partially created by <name>. Only <name> should continue to create this profile. Would you like to continue to create this profile?”

Editing a user profile using voice recognition

1. Press system will say, “Please say a command”. Another tone will sound

signaling the system is ready for your command.

2. Say “User Profile”. VOICE/User Profile and

icon will change to the listening icon (

3. Say “Edit”.

4. Depending on the chosen level of feedback, you will need to tell/confirm which user profile to edit.

or VOICE on the steering wheel. A tone will sound and the

will appear in the status bar and then the

Listening

or VOICE on the steering wheel. A tone will sound and the

will appear in the status bar and then the

Listening

Deleting a user profile

1. Press the MENU hard button on the navigation system.

2. Select the ‘Feedback Settings’ tab on the touchscreen.

3. Use the scroll arrow to go to the second page and press the ‘Edit’ button to ‘Manage Voice Recognition User Profiles’.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Voice recognition system overview

4. Select ‘Delete’ to delete either Profile 1 or Profile 2.

5. Select YES when the confirmation pop-up window appears.

Deleting all user profiles at once

1. Press the MENU hard button.

2. Select the ‘System Settings’ tab.

3. Press the ‘View’ button for ‘Delete Stored items’.

4. Select ‘Voice Recognition User Profile’.

Deleting a user profile using voice recognition

1. Press system will say, “Please say a command”. Another tone will sound signaling the system is ready for your command.

2. Say “User Profile”.

VOICE/User Profile and icon will change to the listening icon (

3. Say “Delete”.

VOICE/User Profile and icon will change to the listening icon (

4. Depending on the chosen level of feedback, you will need to tell/confirm which user profile to delete.

or VOICE on the steering wheel. A tone will sound and the

will appear in the status bar and then the

Listening

User profile voice commands

In order to create, edit, delete, or select a user profile through voice, press

or VOICE on the steering wheel controls. After the second tone, say, “User Profile”. A tone will sound and the system will say, “User profile, please say a command” (if in ‘Standard mode’) and another tone will sound. After the second tone, you may say any of the following commands:

• Create user profile 1 • Create user profile 2

• Delete user profile 1 • Delete user profile 2

• Select user profile 1 • Select user profile 2

• Edit user profile 1 • Edit user profile 2

• Help

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Voice recognition system overview

SYNC姞 audio voice control

When ‘On’ is selected, you do not need to say, “USB” or “User Device” first to control a connected USB device.

When ‘Off’ is selected, you will need to say, “USB” or “User Device” before all SYNC commands.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

THX AUDIO SYSTEM — IF EQUIPPED (LINCOLN VEHICLES ONLY)

Your vehicle may be equipped with the THX威 certified premium audio system. This system creates optimal acoustic quality for all seating positions and road conditions.

The system offers an advanced speaker system, amplifier, subwoofer and equalizer.

SONY AUDIO SYSTEM (IF EQUIPPED)

Your vehicle may be equipped with the SONY premium audio system. This system creates optimal acoustic quality and offers an advanced speaker system, amplifier, subwoofer and equalizer.

Voice commands in audio mode

When in audio mode, press When prompted, you may say any of the following commands:

•On •Off

•Headphones •Headphones off

•Jukebox •Disc

•CD •DVD

•Video CD •Radio

•Sirius •Rear DVD

•SYNC •Line in

•USB •User Device

• Help •Phone

• Read Message

Note: If you are not in audio mode, press wheel controls. When prompted, say, “Audio” and then any of the above commands.

or VOICE on the steering wheel controls.

or VOICE on the steering

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

1. Ensure that the system is on.

2. Press the RADIO hard button.

3. Select the ‘AM’ tab on the touchscreen. Once in AM mode, you may select from ‘Show options’ and ‘Show presets’.

4. Press ‘Show Options’ to select from:

• Scan: Press for a brief sampling of all listenable stations. Press again to disable and remain on the current selection.

• Scan Presets: Press for a brief sampling of all the stations held in the memory presets.

• Autoset Presets: The autoset feature allows you to set strong radio stations without losing your original preset stations. This feature is helpful on trips when traveling between cities with different radio stations. To enable, select AUTOSET PRESETS and the six strongest stations in your current area will be set as presets. To return to your original presets, press AUTOSET PRESETS again and the feature will disable.

• HD Radio (U.S. only): Press to activate HD Radio broadcasts. This enables you to receive radio broadcasts digitally, (where available), providing a better quality sound with clear reception and no station drop off, static or distortion. When this feature is not activated or HD Radio broadcasts are not available, you will receive analog radio broadcasts. Refer to HD Radio Information in the following section for more information.

5. Press SHOW PRESETS to view the preset stations. To set or change a

preset station, press and hold any of the memory presets buttons (1–6) or any of the soft key memory preset buttons on the screen while on the desired station. The new station will replace the previous one recorded.

1. Ensure that the system is on.

2. Press the RADIO hard button.

3. Select the ‘FM’ tab on the touchscreen. Press again to toggle between

FM1 or FM2. Once in FM mode, you may select between ‘Show Options’ and ‘Show Presets’.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

4. Press ‘Show Options’ to select from:

• Scan: Press for a brief sampling of all listenable stations. Press again to disable and remain on the current selection.

• Scan Presets: Press for a brief sampling of all the stations held in the memory presets.

• Autoset Presets:

stations without losing your original preset stations. This feature is helpful on trips when traveling between cities with different radio stations. To enable, select AUTOSET PRESETS and the six strongest stations in your current area will be set as presets. To return to your original presets, press AUTOSET PRESETS again and the feature will disable.

• Multicast (U.S. only): When HD Radio broadcasts are activated, this button will appear if the selected station has more than one digital broadcast. HD1 signifies the main programming status and is available in analog and digital broadcasts. Any additional multicast stations (HD2–HD8) are digitally broadcast and can be accessed by pressing the multicast button. Refer to HD Radio Information in the following section for more information.

• Set PTY/ALL: Press to select a program type, (as well as between All Radio and All HD stations). Once selected, the type will be displayed above the SET PTY button. Press SEEK or SCAN to initiate a search up or down the frequency. The search will stop when the desired program type has been reached. Note: The system will scan the frequency band three times for the chosen program type. If the program type is unavailable in your reception range, the system will return to the previous station.

The autoset feature allows you to set strong radio

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

5. Press ‘Show Presets’ to view the preset stations. To set or change a preset station, press and hold any of the presets while on the desired station. The new station will replace the previous one recorded.

Radio voice commands

While listening to the radio, press controls. When prompted, you may say any of the following commands:

• On • Off

• <530–1710> • <87.7–107.9>

• AM <530–1710> • FM <87.7–107.9>

• AM • FM1

• FM2 • Preset <1–6>

• AM preset <1–6> • FM1 preset <1–6>

• FM2 preset <1–6> • Tune

• Help

Note: If you are not listening to the radio, press steering wheel controls. When prompted, say, “Radio” and then press

or VOICE on the steering wheel controls again and you can say any of the above commands.

*If you have said, “Tune”, you can then say any the following commands:

•<530–1710> •<87.7–107.9>

•AM <530–1710> •FM <87.7–107.9>

•AM •FM1

•FM2 •Preset <1–6>

•AM preset <1–6> •FM1 preset <1–6>

•FM2 preset <1–6>

or VOICE on the steering wheel

or VOICE on the

HD RADIO™ INFORMATION (U.S. ONLY)

What is HD Radio™ technology and how does it work? HD Radio™ technology is the digital evolution of analog AM/FM radio. Your system has a special receiver which allows it to receive digital broadcasts (where available) in addition to the analog broadcasts it already receives. Digital broadcasts have better sound quality than analog broadcasts as digital broadcasts provide free, crystal clear audio with no static or distortion. For more information, and a guide to available stations and programming, please visit www.hdradio.com.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

Using HD Radio™ technology

1. Press the RADIO hard button.

2. Select the AM or FM tab on the touchscreen.

3. Select ‘HD Radio’. When HD Radio™ reception is enabled and you are

tuned to a station with HD Radio broadcasts, you may notice the following indicators on your screen:

1. HD) logo: This indicator will

display in gray when a digital station is being acquired and will appear in orange when digital audio is playing.Note: When this logo is available, you will also see Title and Artist fields on screen.

2. Multicast button: This button

will appear in FM mode (only) if the current station has multiple digital broadcasts. Press the multicast button repeatedly to access the other digital broadcasts. The numbers that are highlighted signify available digital channels where new/different content is available. HD1 will signify the main programming service and is available in analog and digital broadcasts. Any additional multicast stations (HD2–HD8) are only broadcast digitally.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

When HD Radio broadcasts are active, you can access the following functions:

• Set PTY/ALL: Select ‘All HD Stations’ to have your system only access HD stations. Press Seek to initiate the search for HD Radio stations. Note: When your system is searching for an HD Radio station, it will momentarily pause on all strong stations in an attempt to decode the station (to see if there is a digital broadcast).

• Scan: Press to scan through available stations. Note: You will not be able to access HD2–HD8 stations but you may see the HD logo appear if the station has a digital broadcast.

• Seek: Press to seek to the next strong radio station. If the current station has multiple digital broadcasts, the mutlicast button will

display. Press Seek repeatedly to advance through all available broadcasts. If you are on the last multicast channel, press Seek to advance to the next strong station.

• Tune: Turn the tune knob to go up/down the frequency in individual increments.If the current station has multiple digital broadcasts, the mutlicast button will display. Turn the tune knob to advance through all available broadcasts. If you are on the last broadcast channel, turn to advance to the next frequency on the band.

• Multicast button: Press the multicast button repeatedly to access other available HD Radio broadcasts (these will be highlighted). HD1 is the main programming status and is available in analog and digital broadcasts. Any additional multicast stations (HD2–HD8) are only broadcast digitally.

• Saving a multicast station as a preset When the channel is active on-screen, press and hold a memory preset slot on the right side of the screen until the sound returns. When recalling a HD2/HD3 memory preset, there will be a momentary mute before the digital audio is played as the system must once again acquire the digital signal. If you have turned this feature off, this will automatically turn on HD Radio broadcasts and will tune to the selected frequency. Note: As with any saved radio station, you will not be able to access the saved station if your vehicle is outside the station’s reception area.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

LIVE broadcasts: If a station has a live broadcast (such as a baseball game), LIVE will appear embedded in the antenna on screen. These are analog broadcasts with digital components (i.e. artist, title). Note: If HD1 is a live broadcast, the HD Radio broadcast logo will not appear. If HD2–HD8 is a live broadcast, the multicast button may be displayed, but not the HD Radio broadcast logo.

HD Radio reception factors Reception area: If you are listening to a multicast station and you are

on the fringe of the reception area, the station may mute due to weak signal strength. If you are listening to HD1, the system will simply switch to the analog broadcast until the digital broadcast is available again. However, if you are listening to any of the possible HD2–HD8 multicast channels, the station will mute and stay muted unless it is able to connect to the digital signal again. If it is not able to reconnect, ‘HD Unavailable’ will appear in the lower status bar.

Station blending: When a station is received, the system will play the station in the analog version and then, if the receiver verifies the station is an HD Radio station, it will shift into the digital version. Depending on the station quality, you may hear a slight sound change when the station segues from analog to the digital version. The shift from analog to digital or digital back to analog sound is known as ’blending’.

Station issues

In order to provide the best possible experience, a contact form has been developed to report any station issues found while listening to a station broadcasting with HD Radio technology. Every station is independently owned and operated. These stations are responsible for ensuring all audio streams and data fields are accurate. This form can be found at: http://www.ibiquity.com/automotive/report_radio_station_experiences.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

Troubleshooting

Experience Cause Possible action

Echo, stutter, skip or repeat in audio Increase or decrease in audio volume

Sound fading, blending in and out

Audio mute delay when selecting HD2/HD3 multicast preset or using the direct tune voice command

Cannot access HD2/HD3 multicast channel when recalling a preset or using the direct tune voice command

Text information does not match currently playing audio

No text information shown for currently selected frequency.

HD2–HD8 stations not found when Scan is pressed.

HD Radio™ technology is manufactured under license from iBiquity Digital Corp. U.S. and foreign patents. HD Radio™ and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp. Ford Motor Company and iBiquity Digital Corp are not responsible for the content sent using HD Radio technology. Content may be changed, added or deleted at any time at the station owner’s discretion.

Poor time alignment

by the radio broadcaster.

Radio is shifting

between analog and

digital audio.

The digital multicast

is not available until HD Radio broadcast can be decoded and

make the audio

available.

The previously stored

multicast preset or

direct tune is not

available in your

current reception

area.

Data service issue by

the radio broadcaster.

Data service issue by

the radio broadcaster.

Pressing Scan will

disable HD2–HD8

channel search.

None — broadcast

issue.

Reception issue that may clear up as you

continue to drive.

This is normal behavior.

Wait until the audio is

available.

None — the station is

not available in your

current location.

Fill out the station

issue form at www.ibiquity.com/ automotive/report_radio

_station_experiences.

Fill out the station

issue form at www.ibiquity.com/ automotive/report_radio

_station_experiences.

None — this is normal

behavior.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

HD voice commands

While listening to the radio, press or VOICE on the steering wheel controls. When prompted, you may say any of the following commands:

• <87.7 — 107> HD <1–8> • FM <87.7-107.9> HD <1-8>

• Tune HD <1-8>

Note: If you are not listening to the radio, press steering wheel controls. When prompted, say, “Radio” and then press

or VOICE on the steering wheel controls again and you can say any of the above commands.

*If you have said, “Tune”, you can then say any the following commands:

• <87.7 — 107> HD <1–8> • FM <87.7-107.9> HD <1-8>

• Tune HD <1-8>

SATELLITE RADIO (SAT) IF ACTIVATED

Once the Satellite Radio feature is activated, your navigation system will have additional features.

1. Ensure that the navigation system is on.

2. Press the RADIO hard button on the navigation system.

3. Select the ‘SAT’ tab on the touchscreen to enter satellite radio mode (if activated).

4. Press ‘Show Options’ to select from: Sat 123: You will be able to access

three different Satellite Radio modes, SAT1, SAT2 and SAT3.

or VOICE on the

Scan: Press to hear a brief sampling of satellite radio channels within the currently selected genre. Press again to stop.

Scan Presets: Press to hear a brief sampling of all preset channels.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

Channel Guide: Press to display a list of satellite radio channels sorted by genre and also to skip or lock out certain channels. Select the desired genre and choose a channel by pressing the channel name button. You can then choose to ‘Skip’ or ‘Lock’ a certain channel. A ‘skipped’ channel will not be accessible using the tune knob, scan or seek functions. (To access the skipped channel, select ‘Direct Tune’ and enter the channel number.) A ‘locked’ channel can only be accessed by entering the ‘Channel Guide’ and then entering the PIN.

Note: The PIN can be reset by simultaneously pressing and holding presets 1 and 5 while on the PIN entry screen. After approximately five seconds, the system will transition to the Channel Guide screen indicating that the PIN is reset. Once you have reset the PIN, the system will then allow you to set a new PIN.

Direct Tune: Press to enter a specific channel using the keypad and go directly to that channel.

Set Genre: Press to choose from a list of possible satellite radio genres. Once a genre is chosen and you press SEEK, it will only seek within the selected genre.

Memo: The MEMO feature allows you to save a song title and artist to the system. When the saved song is playing on any satellite radio channel, the system will alert you with a pop-up in the lower status bar. You can then choose to tune to the station or to ignore the pop-up. When you are in the MEMO screen, the following options are available:

• Refresh: Press to refresh the current artist and title information.

• Song Alert: Press to store the song information displayed in the Title

Field. When the stored song is played in the future, an audio and visual notification will be initiated.

• Artist Alert: Press to store the artist information currently displayed in the Artist Field. When that artist is played again, the system will alert you with a pop-up.

• Alert On/Off: Press to enable/disable the audio and visual song and artists alerts.

Show Presets: Press to display presets at the bottom of the screen.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

SIRIUS姞 satellite radio voice commands (if activated)

While listening to SIRIUS威 satellite radio, (if activated), press VOICE on the steering wheel controls. When prompted, you may say any

of the following commands:

• On • Off

• < Channel name> • < 1–223 >

• SAT1 • SAT2

• SAT3 • Preset <1–6>

• SAT1 preset <1–6> • SAT2 preset <1–6>

• SAT3 preset <1–6> • Seek up

• Seek down • Store preset <1–6>

• Store SAT1 preset <1–6> • Store SAT2 preset <1–6>

• Store SAT3 preset <1–6> • Tune

• Help

Note: If you are not listening to SIRIUS威 satellite radio, press VOICE on the steering wheel controls. When prompted, say, “SIRIUS” and then press you can say any of the above commands.

*If you have said “Tune”, you can then say the following commands:

• < 1–223 > • < Channel name>

• SAT1 • SAT2

• SAT3 • Preset <1–6>

• SAT1 preset <1–6> • SAT2 preset <1–6>

• SAT3 preset <1–6>

or VOICE on the steering wheel controls again and

Satellite radio (if activated)

Your vehicle is equipped with satellite radio capability. The factory installed SIRIUS威 satellite radio system includes a limited subscription term which begins on the date of sale / lease of the vehicle. Extended subscription terms are available, please contact SIRIUS威 at 1–888–539–7474.

You will need to give SIRIUS威 your Satellite Radio ESN Number for activation. The ESN number is found on the System Information Screen (SR ESN:XXXXXXXXXXXX). Press the I button ( system and select the ‘System Info’ tab on the touchscreen.

) on the navigation

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

Satellite radio channels: SIRIUS威 broadcasts a variety of music, news, sports, weather, traffic and entertainment satellite radio channels. For more information and a complete list of SIRIUS威 satellite radio channels, visit www.sirius.com in the United States, www.sirius-canada.ca in Canada, or call SIRIUS at 1–888–539–7474.

Satellite radio reception factors: To receive the satellite signal, your vehicle has been equipped with a satellite radio antenna located on the roof of your vehicle. The vehicle roof provides the best location for an unobstructed, open view of the sky, a requirement of a satellite radio system. Like AM/FM, there are several factors that can affect satellite radio reception performance:

• Antenna Obstructions: For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other material as far away from the antenna as possible.

• Terrain: Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with your reception.

• Station overload: When you pass a ground based broadcast repeating tower, a stronger signal may overtake a weaker one and result in an audio mute.

Unlike AM/FM audible static, you will hear an audio mute when there is a satellite radio signal interference. Your radio display may display ACQUIRING...toindicatetheinterference.

SIRIUS威 satellite radio service: SIRIUS威 Satellite Radio is a subscription based satellite radio service that broadcasts music, sports, news and entertainment programming. A service fee is required in order to receive SIRIUS威 service. Vehicles that are equipped with a factory installed SIRIUS威 Satellite Radio system include:

• Hardware and limited subscription term, which begins on the date of sale or lease of the vehicle.

For information on extended subscription terms, the online media player and other SIRIUS威 features, please contact SIRIUS威 at 1–888–539–7474.

Note: SIRIUS威 reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

Satellite Radio Electronic Serial Number (ESN): This12digit satellite serial number is needed to activate, modify or track your satellite radio account. You will need this number when communicating with SIRIUS威. While in satellite radio mode, you can view this number by pressing the I button ( ‘System Info’ tab on the touchscreen.

Radio Display Condition Action Required

ACQUIRING Radio requires more

SAT FAULT Internal module or

INVALID CHANNEL Channel no longer

UNSUBSCRIBED CHANNEL

) on the navigation system and select the

No action required.

than two seconds to

produce audio for the

selected channel.

system failure

present.

available.

Subscription not available for this

channel.

This message should

disappear shortly.

If this message does

not clear within a short

period of time, or with

an ignition key cycle,

your receiver may have

a fault. See your

authorized dealer for

service.

This previously

available channel is no

longer available. Tune to another channel. If

the channel was one of

your presets, you may

choose another channel

for that preset button.

Contact SIRIUS威 at 1–888–539–7474 to

subscribe to the

channel, or tune to

another channel.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

Radio Display Condition Action Required

NO SIGNAL Loss of signal from

the SIRIUS威 satellite

or SIRIUS威 tower to the vehicle antenna.

UPDATING Update of channel

programming in

progress.

CALL SIRIUS威 1–888–539–7474

PLAYING A CD

Note: CD units are designed to play commercially pressed 4.75 in (12 cm) audio compact discs in the ISO 9660 format only. (UDF format is not supported.) Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player. The label may peel and cause the CD to become jammed. It is recommended that homemade CDs be identified with permanent felt tip marker rather than adhesive labels. Ballpoint pens may damage CDs. Please contact your authorized dealer for further information.

If you press CD/DVD and there is not a disc loaded into the system, NO DISC will appear in the status bar and you will not be able to access the CD screen.

• Insert a disc into the slot. The disc will begin to play.

Satellite service has

been deactivated by

SIRIUS威 Satellite

Radio.

You are in a location

that is blocking the

SIRIUS威 signal (i.e.,

tunnel, under an

overpass, dense foliage,

etc). The system is

working properly. When

you move into an open

area, the signal should

return.

No action required. The

process may take up to

three minutes.

Call SIRIUS威 at

1–888–539–7474 to

re-activate or resolve

subscription issues.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

You can access any of the following options in CD mode:

Scan: Press for a brief sampling of all listenable CD tracks.

Compress (Compression) : Press to engage/disengage the compression

feature. Compression boosts more quiet music and lowers louder music to minimize the need for volume adjustments.

Repeat: Press to engage / disengage the repeat feature. The system will keep playing the same track continually.

Shuffle: Press to engage / disengage the shuffle feature. The system will play all tracks on the disc randomly.

Track List: Press to view a list of tracks on the CD.

Record: Press to record and save the CD or any track(s) on the CD to

the Jukebox. You can then later access/play the saved tracks / CD.

: Press to access the previous track. Press and hold to reverse in

the current track.

/ (Play/Pause) : Press to play or pause the current track.

: Press to access the next track. Press and hold to advance within

the current track.

Press (

MP3

If you press the CD/DVD tab and there is not a disc loaded into the system, NO DISC will appear in the status bar and you will not be able to access the CD screen.

• Insert a disc into the slot. The disc will begin to play. 56

SEEK hard button on your system to listen to the next

) or previous ( ) track.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

You can access any of the following options in MP3 mode:

Scan: Press for a brief sampling of all listenable tracks. Compress (Compression): Press to engage/disengage the compression

feature. Compression boosts more quiet music and lowers louder music to minimize the need for volume adjustments.

Repeat: Press to engage / disengage the repeat feature. The system will keep playing the same track continually.

Shuffle: Press to engage / disengage the shuffle feature. The system will play all tracks on the disc randomly.

Folder mode: Press to activate folder mode. When activated, song play and seeking stays within the current folder.

Folder List: Press to access/view a list of folders on the disc. Select the root folder (if available).

You may then select from all possible folders on the disc.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

You may also use the following:

: Press to access the previous track. Press and hold to reverse in

the current track.

/ (Play/Pause) : Press to play or pause the current track.

: Press to access the next track. Press and hold to advance within

the current track.

Press the next (

CD voice commands

While listening to a CD, press controls. When prompted, you may say any of the following commands:

• Play • Pause

• Repeat • Repeat off

• Shuffle • Shuffle off

• Play next track • Play previous track

• Play track <1–512> • Play folder <1–255>

• Play folder <1–255> track

<1–512>

• Play previous folder • Folder mode

• Folder mode off • Help

Note: If you are not listening to a CD, press steering wheel controls. When prompted, say, “CD” and then any of the above commands.

SEEK hard button on your system to listen to the

) or previous ( ) track.

or VOICE on the steering wheel

• Play next folder

or VOICE on the

PLAYING A DVD IN THE SYSTEM

Your navigation system allows you to play DVD audio and video discs. Ensure that the vehicle is in Park (P) for automatic transmission vehicles, or that the parking brake is engaged for manual transmission vehicles. This will allow you to be able to view and hear the DVD. If the vehicle is moving, you will only be able to hear the audio. To play a DVD:

1. Ensure that the vehicle and the system are on.

2. Insert a DVD into the system, label side up. The system will automatically go into DVD mode.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

You can then select any of the following options on the touchscreen:

: Press to access the previous chapter. Press and hold to reverse in

the current chapter.

/ (Play/Pause) : Press to play or pause the DVD.

: Press to access the next chapter. Press and hold to advance

within the current chapter.

(Stop): Press to stop the current track.

Title: Goes to the main title screen stored on the disc. Menu: Goes to the main menu of the disc. Cursor controls: Use these controls to navigate to the desired menu

selections. Search:: Press to select and go to a specific title or chapter using the

keypad. Settings: Allows you to adjust the certain settings of the DVD player,

such as:

• Video Display Settings: Press to adjust the brightness and contrast. You can also choose to return to the default settings by pressing ‘Restore Default’.

• Audio Language: Press to select which language you would like the DVD to display.

• Subtitle Display: Press to turn subtitles on/off.

• Subtitle Language: Press to select in which language you would like

the subtitles to appear.

• Aspect Ratio: Press to select from wide, full, normal and cinema display.

• Angle Mark Notification: Some DVD discs may have more viewing angles from which to select. Once you have made your selection, press ENTER to confirm. This is disc dependent feature.

Note: Some of the above settings are DVD dependent and availability/operation will vary among DVDs.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

Dolby威 noise reduction is manufactured under license from Dolby威 Laboratories Licensing Corporation. “Dolby威” and the double-D symbol are registered trademarks of Dolby威 Laboratories Licensing Corporation.

During DVD play, you can also touch the screen to access the ‘virtual remote’ which will allow you to ‘Move controls’ on the screen as well as use the cursor controls, ‘Enter’ and ‘Return’ to navigate and make selections within the menus.

DVD voice commands

While watching a DVD, press controls. When prompted, you may say any of the following commands:

• Play • Pause

• Menu • Menu title

• Play next title • Play previous title

• Play title <1–99> • Play next chapter

• Play previous chapter • Play chapter <1–999>

• Play next group • Play group <1–9>

• Repeat • Repeat off

• Play next track <1–512> • Play previous track

Note: If you are not watching a DVD, press steering wheel controls. When prompted, say, “DVD” and then any of the above commands.

or VOICE on the steering wheel

or VOICE on the

Video CD voice commands

While watching a video CD, press controls. When prompted, you may say any of the following commands:

• Play • Pause

• Play previous track • Play next track

• Play track <1–512> • Help

Note: If you are not watching a video CD, press steering wheel controls. When prompted, say, “video CD” and then any of the above commands.

or VOICE on the steering wheel

or VOICE on the

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

Disc voice commands

While watching a disc, press controls. When prompted, you may say any of the following commands:

• Play • Pause

• Menu • Title menu

• Play next title • Play previous title

• Play title <1–99> • Play next chapter

• Play previous chapter • Play chapter <1–999>

• Play next group • Play previous group

• Play group <1–9> • Repeat

• Repeat off • Shuffle

• Shuffle off • Play next track

• Play previous track • Play track <1–512>

• Play folder <1–255> track

<1–512>

• Play previous folder • Folder mode

• Folder mode off • Help

Note: If you are not watching a disc, press wheel controls. When prompted, say, “disc” and then any of the above commands.

JUKEBOX

Your mobile media navigation system has a Jukebox which allows you to save desired tracks or CDs to the hard drive for later access. The hard drive can store up to 10 GB* (164 hours; approximately 2,472 tracks) of music. The system contains a Gracenote威 media database that allows for display of song title, album title, and album cover art. After saving music to the hard drive, you can access and play your music by specific tracks, artists, albums or genres. You can even choose to create and access your own playlists.

*Note: 1 GB equals one billion bytes (1,000,000,000B).

or VOICE on the steering wheel

• Play next folder

or VOICE on the steering

Recording (saving) music to your jukebox

To record (save) music to your jukebox:

1. Ensure that the system is on.

2. Insert a CD into the system. The CD tab will appear.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

3. Select ‘Record’ on the touchscreen.

4. Select either individual tracks or press ‘Select All’ to record the entire CD. Note: The system will default to selecting all tracks if none are selected.

5. Press ‘Start Recording’.

The progress will show at the bottom of the screen.

When the recording process is finished, the system will save your track(s) / CD to the Jukebox.

Note: If you are not actively listening to the disc being recorded, the record rate is much quicker (as fast as five minutes).

Accessing the music in your jukebox

Once you have saved music to your jukebox, you can then choose several ways to play your favorite music. To access:

1. Press the MEDIA hard button on the navigation system.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

2. Select the ‘Jukebox’ tab on the

touchscreen. You can then select from the following options:

Scan: Press for a brief sampling of the currently selected CD, playlist, genre, etc. Press again to disengage.

Repeat: Press to repeat the current CD, playlist, etc. Press again to disengage.

Shuffle: Press to shuffle all the tracks on the current CD, playlist, etc. in random order. Press again to disengage.

Music library: Press to access all of your saved music. You can choose to view/play the material in the following ways:

• Play all tracks: Select to play all tracks saved in the jukebox.

• Playlist: Select to play your own playlist.

• Play genre: Select to have the system play only music from a specific genre.

• Play artist: Select to have the system play only music by a specific artist.

• Play album: Select to have the system play only music from a specific album.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

Options: Select to view your other options:

• Edit Playlists: Select to edit your playlists.

• Edit Music Library Contents: Select to make changes to the

content in your music library.

• Update Album Information from CD Database: Select to update the residing album information from the Gracenote威 database if a recent software update was performed.

• Hard Disk Drive Information: Select to access the system’s hard drive disc information such as used/free space and total capacity.

• CD Database Information: Select to access the CD database information.

Creating a playlist

1. Press the MEDIA hard button.

2. Select the ‘Jukebox’ tab on the

touchscreen.

3. Select ‘Options’.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

4. Select ‘Edit Playlists’.

5. Select which playlist you would like to create.

6. Select which category you would like to access from your saved music.

Audio features

For example, say you chose one saved album from which to select songs.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

7. Select the desired songs and then

press ‘Add’.

The system will show you your currently selected songs. You can choose to add more tracks to your playlist, Sort the Playlist, Delete the playlist or to edit the name of the playlist.

8. When you are done making any

adjustment to the playlist, select ‘Edit Name’ to rename your playlist.

You can then access your playlist by that name.

Jukebox voice commands

While listening to the music stored in the jukebox, press on the steering wheel controls. When prompted, you may say any of the following commands:

• Play • Pause

• Shuffle • Shuffle off

• Repeat • Repeat off

• Play next track • Play previous track

• Play genre <name> • Play artist <name>

or VOICE

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

• Play album <name> • Play track <name>

• Play playlist <name> • Play playlist <1–5>

• Help

Note: If you are not listening to the jukebox, press steering wheel controls. When prompted, say, “Jukebox” and then any of the above commands.

Search commands

Your jukebox has advanced search commands which allow you to have the system search the stored music in your jukebox for a specific artist, album or track. You can search for and play a specific type (genre) of music, a specific album, a specific artist or a specific track.

To use the search commands

When listening to the jukebox, press controls. When prompted, you may say any of the following commands:

• Search genre <name> • Search artist <name>

• Search album <name> • Search track <name>

Once the system is done searching for the type of music, artist, album, or track, you can say any of the following commands:

• Play • Play album <name>

• Play track <name> • Play artist <name>

‘Refining’ your search

You can choose to ’refine’ your search even farther. For example, if you told the system to search and play all music by a certain artist, you can then tell the system to “Refine album” and choose a specific album when prompted. If you then say “Play”, the system will only play music from that specific album.

To refine your search, say any of the following commands after system has finished searching for the type of music, artist, album, or track:

• Refine album <name> • Refine artist <name>

You can then select to:

• Play • Play track <name>

or VOICE on the steering wheel

or VOICE on the

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

USER DEVICE

If your vehicle is equipped with SYNC威, there will be a ‘User Device’ tab in your media options. For more information, please refer to the SYNC威 media features chapter later in this supplement.

LINE IN (AUXILIARY INPUT JACK)

Your vehicle is equipped with an audio input jack which will allow a portable audio device to be listened to through your vehicle’s audio system. To activate this feature:

1. Press the MEDIA hard button on the navigation system.

2. Select the ‘Line In’ tab.

Once a 3.5 mm input jack is plugged into the Line in jack, ensure that the playing device is turned on with the volume set at the maximum level. Press the play button and sound from the device will be emitted through the vehicle speakers. Adjust the volume using the volume control on the navigation system.

For information on the auxiliary input jack location, please refer to the

Auxiliary input jack (Line in) in the Entertainment chapter of your Owner’s Guide.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

REAR DVD SYSTEM (IF EQUIPPED)

Note: The dual DVD headrest screens will only appear if the DVD system was ordered on the vehicle prior to delivery. If the system was added to the vehicle after delivery, these screens will not appear.

Your navigation system allows you to access the dual dvd headrest system (if equipped). To access:

1. Press the MEDIA hard button on the navigation system.

2. Select the ‘Rear DVD A’ tab on the touchscreen to access the Monitor A headrest system:

: Press to access the previous track. Press and hold to reverse in

the current track.

: Press to access the next track. Press and hold to advance within

the current track.

/ (Play/Pause): Press to play or pause the current track.

3. Select the ‘Rear DVD B’ tab on the touchscreen to view the status of the Monitor B headrest system.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

Rear DVD voice commands (if equipped)

If the rear DVD is the only audio source playing, press the steering wheel controls. When prompted, you may say any of the following commands:

• Play • Pause

• Play previous chapter • Play next chapter

• Play previous track • Play next track

• Play previous folder • Play next folder

• Folder mode (if equipped) • Folder mode off (if equipped)

• Shuffle • Shuffle off

• Headphones • Headphones off

• Help

Note: If the Rear DVD is not the only audio source (i.e., the radio is on also), then press say, “Rear DVD” and then any of the above commands.

REAR ZONE (IF EQUIPPED)

This screen allows front seat passengers to select/listen to a different audio/video source than the back seat passengers. The only restriction is that the front and back seat passengers cannot both listen to a different frequency band (AM/FM1/FM2). The frequency band selected by the driver is the band accessible by the rear passenger. To access:

1. Ensure that the system is ON.

2. Press the MEDIA or RADIO hard button on the system.

3. Select the ‘Rear Zone’ tab on the touchscreen.

The screen will show you the selected playing media of both dvd headrest systems and headsets (A and B). To make adjustments, ensure that the correct system (A or B) is highlighted. The appropriate controls will appear to allow you to make adjustments to your current playing media.

•

(Reverse): Press for reverse play.

on the steering wheel controls. When prompted,

or VOICE on

/ (Play/Pause): Press to play or pause the DVD.

•

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Audio features

• (Fast forward): Press for advance play.

SEEK: You may press the SEEK hard button on the system to access the next or previous chapter.

• Media: Press to select the desired media in the selected headset (A or B).

• Rear Controls Enabled/Disabled: Press to turn the Rear Controls (if equipped) on/off.

• Headphones On/Off: Press to turn the headphones on/off.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Climate features (if equipped)

REAR ZONE / CLIMATE CONTROL (IF EQUIPPED)

Your system may allow you to access and make adjustments to the front and rear zone climate controls. To access:

• Press the CLIMATE hard button. From the ‘Front Zone’ screen, you

can select from / make adjustments to the following:

• Driver temperature: Press to increase/decrease the airflow temperature for the driver side of the vehicle. This control also adjusts the passenger side temperature when dual zone operation is disengaged.

• Passenger temperature: Press to activate separate passenger temperature control and increase/decrease the airflow temperature for the passenger in the front of the vehicle.

• +/- Fan speed: Press to increase/decrease the fan speed.

: Distributes air through the instrument panel vents.

•

• : Distributes air through the instrument panel vents, floor vents,

rear seat floor vents and de-mister vents.

•

• : Distributes air through the windshield defroster vents, de-mister

•

• Dual: Press to activate/deactivate separate driver and passenger

: Distributes air through the floor vents, rear seat floor vents.

vents, floor vents and rear seat floor vents. The system will automatically provide outside air to reduce window fogging.

To return to full automatic control, press AUTO on the main bezel.

: Distributes outside air through the windshield defroster vents and de-mister vents. Can be used to clear the windshield of fog and thin ice. The system will automatically provide outside air to reduce window fogging.

temperature controls.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Climate features (if equipped)

• Max A/C: Distributes recirculated air through the instrument panel vents to cool the vehicle. This re-cooling of the interior air is more economical and efficient. Recirculated air may also help reduce undesirable odors from entering the vehicle. Press the MAX A/C button again for normal A/C operation.

From the ‘Rear Zone’ screen (if equipped) you can select from / make adjustments to the following:

• Rear Zone Power: Press to activate/deactivate the rear climate system.

• Rear Control: Press to allow the rear passengers to control the rear climate system using the rear mounted controls.

• Auto: Press to activate automatic mode and have the climate control system automatically select air flow, fan speed and heating or cooling to achieve the desired temperature.

• Temperature: Press up/down to increase/decrease the rear climate temperature.

• +/- Fan Speed: Press to increase/decrease the rear climate airflow.

Note: The appearance of your rear zone screen may vary depending on

your vehicle. For more information on your climate control system, please refer to the Climate Control chapter in your Owner’s Guide.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Climate features (if equipped)

Climate voice commands (if equipped)

If the screen is displaying the climate touchscreen, press or VOICE on the steering wheel controls. When prompted, you may say any of the following commands:

• On • Off

• Automatic • Dual off

• AC on • AC off

• Max AC on • Max AC off

• Defrost • Defrost off

• Rear Defrost • Rear Defrost off

• Recirc • Recirc off

• Fan speed increase • Fan speed decrease

• Temperature increase • Temperature decrease

• Temperature <16.0–32.0> • Temperature <60–90>

• Help

Note: If the system is not displaying the climate touchscreen, press or VOICE on the steering wheel controls. When prompted, say, “Climate” and then any of the above commands.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

INFORMATION MENU

Your navigation system has an Information menu which allows you access to features such as: Where am I, HEV (Hybrid screen information, if equipped), SIRIUS威 Travel Link™ (if activated), Calendar, System Information and Help. These can be accessed by pressing the I hard button (

WHERE AM I ?

Your navigation system is able to tell you your vehicle’s current location. To use the ’Where am I?’ feature:

• Press the I button and select the ‘Where am I?’ tab.

The system will give you your current GPS location (latitude and longitude), the current street you are on as well as the street in front and behind the vehicle position along with distance information.

Note: Not all tab selections shown here will be available in all markets. Check with your authorized dealer for availability.

) on the navigation system.

HYBRID INFORMATION (IF EQUIPPED)

If you have a hybrid vehicle, your navigation system has special hybrid screens which display Energy Flow and Fuel Economy information. To access these screens, press the I button ( system, and then select the ‘HEV’ tab on the touchscreen.

) on the navigation

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

Note: If you have a Escape Hybrid, Mariner Hybrid or Tribute Hybrid, your screen will also have a Power and Efficiency button. For more information, refer to Power and Efficiency later in this section.

ENERGY FLOW SCREEN

The energy flow screen is a graphical representation of how power is transferred within the hybrid system to accelerate the vehicle or recharge the battery. These screens are informational and do not require any input from you.

Note: Due to the screen updates and simplification of the graphics, the display may not show the actual vehicle status.

1. Engine Power: This line represents how much power is being transferred from the engine to the wheels.

2. Engine: This icon represents the Internal Combustion Engine (ICE). It will be highlighted only when the ICE is running.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

3. Generator Power: This line represents how much power is being

generated by the engine for use by the High Voltage (HV) electric system, or how much power is being used by the High Voltage (HV) electric system to control/start the engine.

4. High Voltage (HV) Battery: This icon represents your High Voltage

Battery. It will be highlighted when power is transferred to and from the battery. The fill level represents the state of charge of your HV Battery. The fill level will increase and decrease as the battery charges and discharges during normal operation, but the hybrid system will attempt to control the level to approximately the middle of the gauge under most driving conditions.

5. Battery Power: This line represents how much power the HV battery

is providing to accelerate the vehicle (discharging), or how much power is being delivered from the motor to the battery (charging). Note: The battery power line includes battery power being used to propel the vehicle. It does not include energy being used by accessories (i.e., air conditioning, headlights, radio, etc.)

6. Electric motor: This icon represents the hybrid electric motor. This

symbol will be highlighted to indicate that the vehicle is ready to be driven.

7. Motor power: This line represents how much power is being

transferred between the wheels and the hybrid electric motor.

The energy flow screens contain a title to indicate which mode is active within the hybrid system.

In Hybrid Drive mode, the vehicle is being powered by both the electric motor and the engine.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

In Charging HV Battery mode, power is being stored in the high voltage (HV) battery by the Hybrid system.

In Idle with Charging mode, power is being generated to recharge the high voltage battery.

In Idle mode, the vehicle is either at rest, or is sharing very little power between the hybrid parts.

In Electric Drive mode, the vehicle is driving in electric mode. The power is coming from the electric motor and not the engine.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

FUEL ECONOMY SCREEN

If you have a Fusion Hybrid, Milan Hybrid or MKZ Hybrid, the fuel economy screen displays instantaneous fuel consumption, overall average fuel economy and also a graph of fuel economy achieved in the last 10, 20 or 60 minutes of driving. (Refer to Average Fuel Economy in the Instrument Cluster chapter in your Owner’s Guide.) To view this screen, select ‘Show Fuel Economy’ on the ‘HEV’ tab screen.

If you have an Escape Hybrid, Mariner Hybrid or Tribute Hybrid, the fuel economy screen will display fuel economy achieved in the last 10 minutes of driving. (Refer to Average Fuel Economy in the Instrument Cluster chapter in your Owner’s Guide.) To view this screen, select ’Fuel Economy’ on the ‘HEV’ tab screen.

• Instantaneous Fuel Economy (Inst Econ): This is displayed on the vertical bar on the left of the screen ranging from 0–60 mpg. When the vehicle is not moving, the Ins Econ function will display no bar on the Inst Cons graph indicating 0 mpg. Conversely, if you are driving in electric mode (engine off), this function will display 60+ mpg. Instantaneous Economy cannot be reset.

• Overall Average Fuel Economy (AVG MPG): The AVG MPG is displayed on the upper left hand corner of the screen. The AVG MPG will be retained when the key is turned off and will continue averaging when driving resumes. Pressing RESET will reset the AVG MPG to zero. This will also reset the Average Fuel Economy on the Instrument Cluster. Note: If you have an Escape Hybrid, Mariner Hybrid or Tribute Hybrid vehicle, the average fuel economy information will not appear in the instrument cluster.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

• Fuel Economy History graph: Depending on your vehicle, this graph will indicate average fuel economy in 10, 20 or 60 minute intervals. If you have a Fusion Hybrid, Milan Hybrid or MKZ Hybrid, you can choose the interval using the message center. If you have an Escape Hybrid, Mariner Hybrid or Tribute Hybrid, the display will appear in 10 minute intervals. The graph is updated each minute with the fuel economy that was achieved during the prior 10, 20 or 60 minutes of driving. Each new average will be added to the left side of the graph, shifting the past data to the right. When the graph area is full, the right most point will be deleted, keeping a running scroll with the bar on the left being the most recent. For the Fusion Hybrid, Milan Hybrid and MKZ Hybrid, the previous values will remain when the vehicle is shut off and restarted, but values from a previous drive cycle will be grayed out. For the Escape Hybrid, Mariner Hybrid and Tribute Hybrids, you will start with an empty fuel economy history with every ignition cycle.

If the navigation system has been set to units of Kilometer, the Fuel Economy screen will display the equivalent Consumption Graph in units of L/100 KM. In Consumption (L/100 KM) mode, the IFE function will display MAX until the vehicle is moving. For more information on Average Fuel Economy, refer to Message center in the Instrument Cluster chapter in your Owner’s Guide.

Power and efficiency (if equipped)

If you have an Escape, Mariner or Tribute hybrid, your vehicle is equipped with a Power & Efficiency screen which provides additional information about brake efficiency, vehicle power, air conditioning power and efficiency information.

Brake (brake gauge): The narrow band indicates brake power demand. (The more you press on the brake pedal, the more braking power you demand of the vehicle). The wide band remains stationary to show the area in which braking is more efficient (beneath the line) and the approximate point where the limit of regenerative braking is reached (at the top of the line) and where conventional friction braking is applied (over the line).

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

• When possible, anticipate braking. Moderate braking will help you stay within the efficient braking zone (keeping the narrow band below the wide band) thereby improving the regenerative braking energy recovery.

• Brake demand may be present when coasting (without your foot on the brake pedal), particularly in low gear as the powertrain is contributing to slowing the vehicle.

Note: At zero vehicle speed, the narrow band indicator will show zero. Vehicle (vehicle gauge): The narrow band indicates vehicle power

demand. (The more you press on the accelerator pedal, the more power you demand of the vehicle.) When the transmission is in D (Drive), the wide band indicates the gasoline engine on/off transition point. If the narrow band is above the wide band, the gasoline engine is on. If the narrow band is below the wide band, the gasoline engine is off and the vehicle is in electric mode. If you are in electric mode and you press the accelerator such that the narrow band exceeds the wide band, the gasoline engine will turn on.

• Reduction in vehicle power to below the wide band will result in the engine turning off. In this case, the hybrid’s system is operating in electric mode and “EV” is displayed under the gauge.

• If the power demand is smaller than what is required to turn the engine on, it will be indicated with the narrow band below the wide band. Increase in vehicle power to above the wide band will result in the engine turning on and the “EV” will disappear.

• When the gasoline engine is on for reasons outside of your control (such as warming up the system or charging a low battery), the gasoline engine on/off threshold indicator (wide band) disappears. When the wide band is not displayed, the gasoline engine will not turn off regardless of how little power you demand (even lifting your foot off the accelerator).

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

A/C power gauge: The air conditioning power gauge indicates electrical power demand from your vehicle’s air conditioning system. Air conditioning uses power but does not contribute to propelling the vehicle. The higher the level indication on this gauge, the more air conditioning power is being used. You can see the level of this gauge change by turning air conditioning on and off or changing the climate control set point.

• Some air conditioning power may be used when in the AUTO (Automatic) climate control mode. See the Climate control chapter of your Owner’s Guide for more information.

• In colder ambient temperatures when the air conditioning is used less frequently, the A/C power will often display at zero.

Eff (efficiency gauge): The efficiency gauge indicates short term driving efficiency, measured over the last few minutes. Higher efficiency is indicated by an increase in the level indication.

• This display can be impacted by your use of brakes, accelerator and accessories as well as environmental conditions such as terrain and weather.

• The efficiency display does not reset with the ’Reset’ economy button.

Engine on: This gauge provides you with the reason why the engine is running. When the gasoline engine is on, the buttons will show the reason why. When the gasoline engine is off, ’EV’ will appear in the display. When the gasoline engine is on, one or two of the following reasons will appear. For a more complete description of the reason, simply press the desired button on the touchscreen.

• Engine cold: The engine is on to warm-up. The vehicle will return to electric mode when the engine is warm. This reason may re-appear during a drive or after shutting the vehicle down for a short period. This is normal operation.

• Heater setting: The engine is on because of the heater setting. Reduce or turn off the heater setting to return to electric mode.

• High speed: The engine is on because the vehicle speed exceeds the level for electric mode operation. Reduce the speed to return to electric mode.

• Acceleration: The engine is on because of pressure applied to the accelerator pedal. Reduce the pressure on the accelerator pedal to return to full electric mode.

• Neutral Gear: The engine is on because the vehicle is in neutral gear. Shift out of neutral gear to return to electric mode.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

• Low Gear: The engine is on because the vehicle is in low gear. Shift out of low gear to return to electric mode.

• Batt charging (battery charging): The engine is on to charge the hybrid battery. The vehicle will return to electric mode once the battery is charged.

• Normal operation: The engine is on to optimize vehicle operation. The vehicle will return to electric mode when possible.

SIRIUS姞 TRAVEL LINK™ (IF ACTIVATED, U.S. ONLY)

Your navigation system contains SIRIUS威 Travel Link™ (if activated), a data service feature which can help you locate the best gas prices, find movie listings, get current traffic alerts, access the current weather map, get accurate ski conditions as well as scores to current sports games. Note: A paid subscription is required to access/use these features. Go to www.sirius.com/travellink for more information.

WARNING: Driving while distracted can result in loss of vehicle

Press the I button ( navigation system and then select the ‘Sirius Travel Link’ tab on the touch screen.

)onthe

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

From this screen you can select from the following options:

Traffic:

• On route: Select to identify traffic incidents on your route. You can select any of the list items to view more details on that incident. When viewing the incident, you can select ‘Avoid’ to have the system re-route you around the incident. Note: This button is disabled if a route is not active or the vehicle goes off route.

• Nearby: Select to identify traffic incidents around the vehicle’s current location.

• My Places: Select to identify traffic incidents around your personal traffic places (if programmed).

• With Travel Link, traffic information will be displayed on the map parallel to the road in a different color. The color is determined by the current ‘flow’ of traffic as shown on the Traffic Legend Speed and Flow screen.

• Viewed and unviewed traffic incidents are differentiated as shown on the Traffic Legend Traffic Incidents screen.

• An ‘incident’ which causes a road closure will be noted by purple dotted lines and will also have direction and length information.

Note: Please visit www.sirius.com/traffic# and click on ‘coverage map and details’ for a complete listing of all traffic areas covered by SIRIUS威 Travel Link™.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

Weather:

• Current / 5 Day / Ski Info:

Select to view the current weather, 5 day forecast or ski information for a selected area.

• Nearby Weather: When ‘Nearby Weather’ is selected, the system will automatically display the weather for the nearest location.

• Weather location display: Press to select an area for which you would like to view the weather.

You can also select 5 favorite current / 5 day location,

as well as 5 favorite ski locations from the location selection screen.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

• Weather Map: Select to view a real time weather map. The map can be displayed in three different zoom levels: 500 mi (1,000 km), 50 mi (100 km) and 5 mi (10 km). The weather map shows the following information:

Storm: Available with the 500 mi (1,000 km) and 50 mi (100 km) zoom levels. Different storms have different icons. To view storm information, press the desired storm icon. Then press the ‘Info’ button.

Radar: Radar information is available in all three zoom levels and shows weather fronts and precipitation.

Charts: Chart overlays show highs “H” and lows “L” and Isobars and are available with the 500 mi (1,000 km), 50 mi (100 km) zoom levels.

Winds: Wind speed and direction are only shown at 5 mi (10km) zoom level.

Press ‘Legend’ to view the meaning of the icons used on the map. Press Blend +/- to adjust transparency of the weather map overlay.

Other Services:

• Fuel Prices: Select to show gas prices at stations close to your vehicle’s location or gas stations on an active navigation route. You can choose to sort the list by distance, price or alphabetical order.

Fuel Station

You can also select to view Unleaded or Diesel fuel prices from the ‘Navigation Prefs’ (Preferences) tab under the NAV menu features. If you select ‘Unleaded’, the navigation system will only show list items with Unleaded fuel prices and if you select ‘Diesel’, the navigation system will only show diesel prices. List items with ‘NA’ represent stations where fuel prices are either not available or has a fuel price that is not selected under ‘Navigation Prefs’ screen. The different hour glass icons indicate the age of the collected data.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

• Movie Listings: Select to display movie theaters located nearby the vehicle’s current location. Select the clock icon to view the show times. Show times are only available for the list items which have a clock next to them.

• Sports Information: Select to display scores and schedules for a variety of sports. You can even save up to 10 favorite teams for easier access. The score screen automatically refreshes when a game or event is in progress. On the score screen, a TUNE button is shown next to the list item when a live radio broadcast is in process.

Note: Neither SIRIUS威 nor Ford is responsible for any errors or inaccuracies in the SIRIUS威 Travel Link™ services or its use in vehicles.

SIRIUS姞 Travel Link™ (if activated) voice commands (if equipped)

When using SIRIUS威 Travel Link™, press wheel controls. When prompted, say, “Travel Link”, wait for the system to sound two tones and you may say any of the following commands:

• Traffic • Weather map

• Weather • Five day weather forecast

• Movie listings • Fuel prices

• NFL scores • NFL schedule

• Baseball scores • Baseball schedule

• College football scores • College football schedule

• College basketball scores • College basketball schedule

• Motor sports results • Motor sports schedule

• Golf leaderboards • Golf schedule

Movie Theater

or VOICE on the steering

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

• Sports schedules • Sports scores

• NBA scores • NBA schedule

• NHL scores • NHL schedule

• Help

If you say the command, “Sports scores” once, the system is ready. You may then say any of the following commands:

• NHL scores • NBA scores

• NFL scores • Baseball scores

• College football scores • College basketball scores

• Motor sports results • Golf leaderboards

• Travel link help

If you say the command “Sports schedules” once, the system is ready. You may then say any of the following commands:

• NHL schedule • NBA schedule

• NFL schedule • Baseball schedule

• College football schedule • College basketball schedule

• Motor sports schedule • Golf schedule

• Travel link help

CALENDAR

• Press the I button and then select the ‘Calendar’ tab. You can then select which month you would like to view by

pressing select ‘Go to Today’.

• You are able to view calendars from one previous year and the next 10 years.

Note: Not all tab selections shown here will be available in all markets. Check with your authorized dealer for availability.

/ or you can also

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

SYSTEM INFORMATION

• Press the I button ( navigation system and then select the ‘System Information’ tab on the touchscreen.

In this screen you can view the following options:

• Phone number for your Customer Service Center

• Current system versions installed

• Current SIRIUS威 Radio ESN

• SIRIUS威 Travel Link™ ESN

Note: Not all tab selections or features are available in all markets. (For example, SIRIUS威 Travel Link™ is only available in the U.S., and SIRIUS威 Satellite Radio is only available in the U.S. and Canada.) Please check with your authorized dealer for availability.

HELP

The Help screen allows you to view basic information about controls and driving restrictions as well as traffic legend information and basic voice commands available in various modes. To access:

• Press the I button ( ‘Help’ tab.

Select ‘Basic Operation’ at the top of the screen to view hard buttons on your navigation system. Press the desired icon to view the button description.

)onthe

) on the navigation system and then select the

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Information menu

Select ‘Driving Restriction’ at the top of the screen to view the system’s driving restriction.

Select ‘Traffic Legend’ at the top of the screen to view the color code for the ‘Speed and Flow’ of roads on the navigation system. You can also select ‘Traffic Incidents’ to help you differentiate between viewed and unviewed incidents.

Select ‘Voice Commands’ at the top of the screen. Select any of the available categories on the screen. When selected, the system will show you a brief listing of possible voice commands in that specific mode. Please refer to the Voice

recognition system overview

chapter for information on the voice recognition system.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Sound menu features

SOUND FEATURES

The sound menu allows you to access and adjust settings such as Bass, Treble, Fade, Balance, Digital Signal Processing (DSP), Speed compensated volume (SCV) and the visualizer. To access:

1. Press the SOUND hard button.

2. Press the appropriate tab to select from:

Bass/Treble: Press + to increase or — to decrease the levels.

Balance/Fade: Press to adjust the sound between the left and right speakers (Balance) and to adjust the sound to the front and rear speakers (Fade).

SCV (Speed compensated volume): With this feature on, the radio volume changes automatically with vehicle speed to compensate for road and wind noise. Select a level of compensation between 1 and 7 by pressing the corresponding button.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Sound menu features

DSP (Digital Signal Processing): Depending on your option package, you may either select from ‘Stereo’ or ‘Surround Sound’.

Or, you may choose to optimize the sound quality for ‘All Seats’, ‘Driver Seat’ or ‘Rear Seat’.

Visualizer: Press to turn the audio visualizer display on or off.

Note: Turning the visualizer setting to off will not remove the visualizer on the home screen. You will need to select a different view in order to remove the visualizer.

THX Demo (Lincoln vehicles only, if equipped): Select this tab

to activate the THX audio demonstration. You may press “X” to stop the demonstration.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Setting a destination

PROGRAMMING A DESTINATION

The Destination screen gives you many options. You can choose to access ‘Quick’ selections (available while the vehicle is moving) such as your preset favorites or emergency points of interest, you can choose to set a destination using ‘Standard’ resources (such as street address, or points of interest, etc.) or you can choose the ‘Edit Route’ tab which will allow you to set any preferences you may have for your current navigation route. Note: The navigation system contains map coverage for North America; including the United States, Puerto Rico and U.S. Virgin Islands, Canada and Mexico. To access:

1. Press the DEST hard button on the navigation system.

2. Select from the following on the touchscreen:

Quick: The Quick Destination tab allows you to Cancel the route, access Emergency destinations (such as a hospital or police), save your favorite destinations to presets for quick access, find the nearest POI, and also to use a Previous Destination or an entry from your Address Book as a destination.

Standard: Your Standard Destination screen allows you to set a destination using any of the following: Address Book, Previous Destination, Phone Number, Map, Street Address, POI, Freeway Exit/Entrance or a specific Intersection.

Note: This is a speed dependent feature.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Setting a destination

Edit Route: The ‘Edit Route’ screen allows you to make any adjustments to the currently selected navigation route such as: Cancel route, Detour, View Route, Edit Route Preferences, Edit Traffic Preferences, Edit Destination / Way Points and Edit Turn List.

Setting a destination by voice

Press “Please say a command.” VOICE/Main Menu and

tone will sound and the icon will change to

• To enter an address, say “Destination street address”.

• To enter an intersection, say “Destination Intersection”.

• To find a POI by its category, say “Destination <POI category>”. (For

example, “Destination restaurants”). You may also say “Destination POI category” and “Destination nearest POI”.

• To find a POI by its name, say “Destination POI”. Follow the prompts to say a POI by name. (For example, “Starbucks”.) You will need to specify the POI category when prompted.

• If you want to route to a previous destination, say, “Destination previous destination”.

• If you have programmed a home entry, you may set this as your destination by saying, ⬙Destination home”.

• If you have created nametags for any of your address book entries, you may set any of them as your destination by saying, “Destination <nametag>”.

• For Help, say, “Destination Help”.

Note: If the system’s language is set to French or Spanish, the city and street names will need to be spelled. When in ‘Spelling mode’, you may speak letters or say, “line # ”. The system is designed to work even if you have made a spelling error.

or VOICE on the steering wheel. A tone will sound followed by

will appear in the status bar first. Then, a

Listening

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Setting a destination

ACCESSING YOUR QUICK DESTINATION OPTIONS

To access your Quick Destination options:

1. Press the DEST hard button on the navigation system.

2. Select the ‘Quick’ tab on the touchscreen to select from the following: Cancel route: Select to cancel the

current route. The system will ask you for confirmation.

Emergency: Select to find Hospitals and Police close to the vehicle’s current location. The system may list up to 25 locations.

Favorite Destination Presets:

This feature will store your home location as well as five address book entries for quick access. To set a favorite destination preset: press the desired preset location and follow the system’s screens to choose the desired selection to store. The system will display the icon and name associated with the location.

Find nearest POI: Your navigation system allows you to select up to five different Point of Interest (POI) icons which will appear on the navigation map. You can change these icons at any time but the default icons are as follows:

• Gas Station

• ATM

• Restaurant

• Accommodations

• Parking Garage

Once one of these categories is selected, a list will be shown in order of distance from the vehicle’s current location. The Quick POI search range will expand to a 50 mile radius automatically if no POI is found in the default radius of 25 miles.

• List all categories: Select to have the system display a list of all categories. Select the desired category and then the desired subcategory. The system will show a list with name and your distance to each POI from the current location. Once a specific location is selected, the system will display the Destination map screen for confirmation.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Setting a destination

Previous Destination: Press to select a previous destination.

Address Book: Press to set an entry in your address book as your

destination.

ACCESSING YOUR STANDARD DESTINATION OPTIONS

1. Press the DEST hard button on the navigation system.

2. Select the ‘Standard’ tab on the touchscreen to access the following destination options:

• Address Book • Street Address

• Previous Destination • Point of Interest (POI)

• Phone Number • Freeway Entrance/Exit

• Map • Intersection

Address book

1. Press the DEST hard button on the navigation system.

2. Select the ‘Standard’ tab on the touchscreen.

3. Select ‘Address Book’ to access your ‘Address Book Entries List’.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Setting a destination

Your navigation system can store up to 25 entries which can be used as destinations, waypoints, and areas to avoid.

Entries can be sorted alphabetically (A-Z), by date or icon. Press the ADD button to add entries to the address book and select the desired destination entry method.

Once address book entries are input, they can be selected for display. Once displayed on the map/information split screen, you can choose to ‘Set as Dest’, ‘Set as Waypoint’, ‘Delete’ or ‘Edit’ the address book entry.

Edit allows you to name/change the entry, add/edit a phone number, add/edit the icon or set the entry as a favorite destination. (These are destination presets which work similarly to the audio presets. Once set, the favorite destinations appear at the bottom of the Quick destination entry screen for one-touch fast entry.)

All address book entries can be deleted at once by pressing the MENU hard button, selecting the ‘System Settings’ tab, and then pressing the ‘View’ button for ‘Delete stored items’. Then, select ‘Address Book.’

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Setting a destination

Previous Destination

1. Press the DEST hard button on the navigation system.

2. Select the ‘Standard’ tab on the touchscreen.

3. Press ‘Previous Destination’ to access your ’Previous Destination List’.

The navigation system can store up to 20 recently used destinations and waypoints. Destinations already present in the list will not be duplicated. When a new entry is added to the list, the oldest one will be removed.

• Set as Dest: Select this feature to set the current entry as your destination. The screen will display the destination map screen showing the selected destination. You can then select to set it as a final destination or a waypoint.

• Delete: Select to delete individual entries.

• Delete all: Select to delete all entries.

You can delete all previous destinations at once by pressing the MENU hard button, then select the ‘System Settings’ tab, and press the ‘View’ button for ‘Delete stored items’. Then, select ‘Previous Destinations.’

Phone number

1. Press the DEST hard button on the navigation system.

2. Select the ‘Standard’ tab on the

touchscreen.

3. Press ‘Phone Number’.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Setting a destination

This feature allows you to search for a destination using the phone number of a saved POI or Address Book entry by entering the phone number on the keypad on the screen. After the number is entered, the system will ask you to confirm the name under which the phone number is registered.

Map

1. Press the DEST hard button on the navigation system.

2. Select the ‘Standard’ tab on the touchscreen.

3. Select ‘Map’.

You can now select any point on the map to set as a destination or waypoint by using the map cursor.

2011 Centerstack (ng1) Supplement, 2nd Printing USA (fus)

Lincoln MKT (2011) Navigation System [ru]

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of Contents

Introduction

MOBILE MEDIA NAVIGATION SYSTEM

DRIVING RESTRICTIONS

SAFETY INFORMATION

PRIVACY INFORMATION

VOICE RECOGNITION

QUICK START

TO PLAY A RADIO STATION

TO PLAY SATELLITE RADIO (IF ACTIVATED)

TO LOAD A CD OR DVD:

TO PLAY A PREVIOUSLY LOADED CD OR DVD:

TO SET A DESTINATION USING THE NAVIGATION SYSTEM:

TO PLAY A PREVIOUSLY LOADED DVD IN THE FAMILY ENTERTAINMENT DVD SYSTEM (IF EQUIPPED)

System overview

FORD AND MERCURY SYSTEM

LINCOLN SYSTEM

Navigation system

SCREEN DIFFERENCES

Display options

Voice commands in display mode (if equipped)

STATUS BARS

HOME SCREEN

Loading pictures

Editing and deleting photos

REVERSE CAMERA (IF EQUIPPED)

QUICK REFERENCE CHART

SYSTEM MENU FEATURES

Display options

Setting the clock

Feedback settings

System settings

Valet mode

Voice recognition system overview

VOICE RECOGNITION

Feedback through audible tones

Confirmation prompts

HOW TO USE VOICE COMMANDS WITH YOUR SYSTEM

Voice recognition visual feedback

Speaking instructions

ADJUSTING THE VOICE PROMPT VOLUME

Voice feedback / interaction

VOICE RECOGNITION TUTORIAL

Tutorial voice commands

VOICE NAME TAGS

CREATING A USER PROFILE

CREATING A USER PROFILE USING VOICE RECOGNITION

Selecting a user profile

Selecting a user profile using voice recognition

Editing a user profile

Editing a user profile using voice recognition

Deleting a user profile

Deleting all user profiles at once

Deleting a user profile using voice recognition

User profile voice commands

Audio features

THX AUDIO SYSTEM — IF EQUIPPED (LINCOLN VEHICLES ONLY)

SONY AUDIO SYSTEM (IF EQUIPPED)

Voice commands in audio mode

Radio voice commands

HD RADIO™ INFORMATION (U.S. ONLY)

HD voice commands

SATELLITE RADIO (SAT) IF ACTIVATED

Satellite radio (if activated)

PLAYING A CD

CD voice commands

PLAYING A DVD IN THE SYSTEM

DVD voice commands

Video CD voice commands

Disc voice commands

JUKEBOX

Recording (saving) music to your jukebox

Accessing the music in your jukebox

Creating a playlist

Jukebox voice commands

USER DEVICE