Installation, Operating and Servicing
Instructions
Silverlink 600 Electric Griddles
GS3, GS3C, GS4, GS4C, GS6, GS6C, GS65, GS6/T, GS6/TR, GS6/TFR, GS7, GS7C, GS7/R, GS9
Please make a note of your product details for future use:
Date Purchased:_________________________
Model Number:__________________________
Serial Number:__________________________
Dealer:_________________________________
_______________________________________
IS 215 ECN 3607 |
Page 1 of 8 |
CONTENTS
Important Information |
2 |
Warnings and Precautions |
3 |
Technical Data |
3 |
Checklist of Enclosures |
3 |
Installation and Commissioning |
3-5 |
Operating Instructions |
5 |
Cleaning |
5-6 |
Servicing, Maintenance and Component Replacement |
6 |
Fault Finding |
6 |
Spare Parts List |
6-7 |
Accessories |
7 |
Service Information and Guarantee |
8 |
IMPORTANT INFORMATION
Read these instructions carefully before using this product, paying particular attention to all sections that carry warning symbols, caution symbols and notices. Ensure that these are understood at all times.
WARNING!
This symbol is used whenever there is a risk of personal injury.
CAUTION!
This symbol is used whenever there is a risk of damaging your Lincat product.
NOTE:
This symbol is used to provide additional information, hints and tips.
KEEP THIS MANUAL FOR FUTURE REFERENCE
IS 215 ECN 3607 |
Page 2 of 8 |
WARNINGS AND PRECAUTIONS
This appliance must be installed, commissioned and serviced by a qualified person in accordance with national and local regulations in force in the country of installation.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person.
Ensure that the plug/socket is accessible at all times.
Strip plastic coating and clean the appliance before use.
During operation parts may become hot - avoid accidental contact.
Disconnect this appliance before servicing, maintenance or cleaning.
TECHNICAL DATA
Model |
Height mm) |
Width (mm) |
Depth (mm) |
Weight (kg) |
|
GS3, GS3C |
|
300 |
|
24 |
|
GS4, GS4C |
|
450 |
|
40 |
|
GS6, GS6C, GS6/T, |
|
600 |
|
50 |
|
GS6C/T, GS6/TR, GS6/TFR |
330 |
600 |
|||
|
|
||||
GS65 |
|
600 |
|
50 |
|
GS7, GS7C, GS7/R |
|
750 |
|
61 |
|
GS9 |
|
900 |
|
93 |
CHECK LIST OF ENCLOSURES
Warranty card
Instructions manual
INSTALLATION AND COMMISSIONING
This appliance must be earthed.
An equipotential bonding terminal is provided to allow cross bonding with other equipment.
IS 215 ECN 3607 |
Page 3 of 8 |