How it Works
LINAK A S
Loading...
HC2XBL
User Manual
33 pgs2.49 Mb0

LINAK A S HC2XBL User Manual

Download
USER MANUAL
TWINDRIVE TD4
®
To learn more about LINAK, please visit:
www.linak.com
Page 1 of 28
Contents
Preface................................................................................................................................................. 4
Important information ...................................................................................................................... 5
Safety instructions ............................................................................................................................. 5
Before installation, reinstallation or troubleshooting ........................................................................ 8
Before start-up ............................................................................................................................... 8
During operation ............................................................................................................................. 8
Misc ............................................................................................................................................... 8
Only for EU markets ........................................................................................................................... 9
Only for Non EU markets .................................................................................................................. 9
Misuse ................................................................................................................................................. 9
Seulement pour les marchés au sein de l´UE ................................................................................. 12
Repairs ................................................................................................................................................. 13
Misc. on the TWINDRIVE® TD4 system ............................................................................................. 14
Description of the TWINDRIVE® TD4 system ................................................................................... 14
Mounting instructions for the TWINDRIVE® system ...................................................................... 15
Page 3 of 28
Preface
Dear User,
We are delighted that you have chosen a product from LINAK®. LINAK systems are high-tech products based on many years of experience in the manufacture and development of actuators, electric control boxes, controls and chargers.
This User Manual does not address the end-user. It is intended as a source of information for the manufacturer of the equipment or system only, and it will tell you how to install, use and maintain your LINAK electronics. It is the responsibility of the manufacturer of the end-use product to provide a User Manual where relevant safety information from this manual is passed on to the end-user.
We are sure that your LINAK product/system will give you many years of problem-free operation. Before our products leave the factory they undergo full function and quality testing. Should you nevertheless experience problems with your LINAK product/system, you are always welcome to contact your local dealer. LINAK subsidiaries and some distributors situated all over the world have authorised service centres, which are always ready to help you.
LINAK provides a warranty on all its products. This warranty, however, is subject to correct use in accordance with the specifications, maintenance being done correctly and any repairs being carried out at a service centre, which is authorised to repair LINAK products. Changes in installation and use of LINAK products/systems can affect their operation and durability. The products are not to be opened by unauthorised personnel.
The User Manual has been written based on our present technical knowledge. We are constantly working on updating the information and we therefore reserve the right to carry out technical modifications.
LINAK A/S
Page 4 of 28
Important information
Important information on LINAK® products can be found under the following headings:
Warning!
Failure to comply with these instructions may result in accidents involving serious personal injury.
Failing to follow these instructions can result in the product being damaged or being destroyed.
Safety instruction
General
Safe use of the system is possible only when the operating instructions are read completely and the instructions contained are strictly observed.
Failure to comply with instructions marked with the ”NOTE” symbol may result in serious damage to the system or one of its components.
It is important for everyone who is to connect, install, or use the systems to have the necessary information and access to this User Manual. Follow the instructions for mounting – risk of injury if these instructions are not followed.
The appliance is not intended for use by young children or infirm persons without supervision.
If there is visible damage on the product it must not be installed.
Note that during construction of applications, in which the actuator is to be fitted, there must be no possibility of personal injury, for example squeezing of fingers or arms.
Assure free space for movement of the application in both directions to avoid blockade.
Page 5 of 28
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation
• Statement – for all intentional and unintentional radiators: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Statement for digital devices for Class B: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Page 6 of 28
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Labeling Requirements:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Page 7 of 28
Before installation, de-installation or troubleshooting:
• Stop the TD4.
• Disconnect the power supply or pull out the mains plug.
• Relieve the TD4 of any loads, which may be released during the work.
Before start-up:
• Make sure that the system has been installed as instructed in this User Manual.
• Make sure that the voltage is correct before the system is connected to the mains. (See TD4 label in the appendix).
• System connection. The individual parts must be connected before connecting to the mains.
During operation
• If the control box makes unusual noise or smells, switch off the mains voltage immediately.
• Take care that the cables are not damaged.
• Unplug the mains cable on mobile equipment before it is moved.
Misc:
The actuator system has a sound level below 55dB(A) in typical applications. Updated manuals and declarations can always be found here:
www.linak.com/HOMELINE
Electromagnetic fields (EMF):
This LINAK appliance complies will all standards regarding electromagnetic fields (EMF). If handled properly and according to instructions in this user manual, the appliance is safe to use based on scientific evidence available today.
Page 8 of 28
Only for EU markets
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Only for Non EU markets
Persons who do not have the necessary experience or knowledge of the product/products must not use the product/products. Besides, persons with reduced physical, sensory or mental abilities must not use the product/ products, unless they are under surveillance or they have been thoroughly instructed in the use of the apparatus by a person who is responsible for the safety of these persons.
Moreover, children must be under surveillance to ensure that they do not play with the product.
It is the operator’s responsibility to ensure that there is free space for the application to move without risk for the operator or bystanders before operating the application.
Misuse
Do not overload the actuators – this can cause danger of personal injury and damage to the system.
Do not use the system in environments other than the intended indoor use
Page 9 of 28
Informations importantes
Les informations importantes sur les produits LINAK® peuvent être trouvées dans les rubriques suivantes:
Attention!
Le non respect de ces instructions peut entraîner des accidents impliquant des blessures graves.
Ne pas suivre ces instructions peut entraîner l´endommagement ou destruction du produit.
Consignes de sécurité
Géneral
Le non respect de ces instructions peut entraîner des accidents impliquant des blessures graves.
Ne pas suivre ces instructions peut entraîner l´endommagement ou destruction du produit.
L´utilisation en toute sécurité du système n´est possible que si l´intégralité des instructions ont été lues et ont été strictement suivies.
Le non respect de se conformer aux instructions marquées du symbole “note” peut entraîner de graves dommages au système ou à un de ses composants.
Il est important pour tout individu qui connecte, installe, ou utilise le système d´avoir les informations nécessaires et l´accès à ce mannuel d´utilisation.
Suivez les instructions pour le montage – risque de blessure si ces instructions ne sont pas suivies.
L´appareil n´est pas destiné à être utilisé par des enfants ou des personnes handicapées sans surveillance.
S´il y a des dommages visibles sur le produit, l´installation ne doit pas être effectuée.
Prendre en compte lors de la construction du matériel, dans lequel l´actionneur est incorporé, qu´il ne doit y avoir aucune possibilité de blessures corporelles, telles que la compression des doigts ou des bras.
Assurez un espace libre autours du materiel pour éviter tout blocage.
Page 10 of 28
Avant l´installation, ré-installation ou le dépannage:
• Arrêtez TD4
• Retirez la prise du secteur
• Soulagez TD4 des toutes charges qui pourraient être émises lors de l´utilisation
Avant de démarage:
• Assurez-vous que le système a été installalé comme indiqué dans le mannuel d´utilisateur.
• Assurez-vous que la tension du boîtier de contrôle est correcte avant que le système soit connecté sur le secteur.
• Système de connection. Les différentes pièces doivent être connectées entre elles avant que le boîtier de contrôle soit connecté au secteur. Consultez le manuel d´utilisation si nécessaire.
Pendant le fonctionnement:
• Si le boîtier de contrôle émet un bruit ou odeurs inhabituelles, éteignez la tension immédiatement.
• Veuillez à ce que les cables ne soient pas endommagés.
• Débranchez le cable d´alimentation sur l´équipement mobile avant qu´il ne soit déplacé.
• Les produits ne doivent-être utilisés que dans un environement qui correspond à leur IP.
Divers:
Le système d´actionneur présente un niveau sonore inférieur à 55dB (A) dans des applications typiques. Les mises à jours des manuels et autres informations peuvent-être trouvées sur www.linak.com/homeline
Electromagnetic fields (EMF):
This LINAK appliance complies will all standards regarding electromagnetic fields (EMF). If handled properly and according to instructions in this user manual, the appliance is safe to use based on scientific evidence available today.
Page 11 of 28
Loading...
+ 23 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use