How it Works
LINAK A S
Loading...
HB2XRFXXXX
User Manual
32 pgs927.53 Kb0

LINAK A S HB2XRFXXXX User Manual

Download
USER MANUAL
TWINDRIVE
®
TD3.2 / TD3.3
To learn more about LINAK please visit:
WWW.LINAK.COM
2
Contents
Preface ................................................................................................................................................................. 4
Repairs ................................................................................................................................................................. 6
Misc. on the TD3 TWINDRIVE
Description of the TWINDRIVE® TD3 system ..................................................................................................... 7
Mounting guidelines for the TWINDRIVE® system .................................................................................... 8
Functional description ............................................................................................................................... 9
Handset for massage.................................................................................................................................10
Start-up - How to install the RF handset ....................................................................................................13
Mounting instructions for the massage motor ..........................................................................................16
Changing of batteries ...............................................................................................................................20
Emergency lowering function: (optional) ...................................................................................................20
Welding the twist bracket on the frame ...................................................................................................22
Labels ................................................................................................................................................................. 23
Disposal of LINAK’s products .............................................................................................................................23
Manufacturer’s declaration ................................................................................................................................30
Addresses ............................................................................................................................................................32
®
system............................................................................................................... 7
3
Preface
We are delighted that you have chosen a product from LINAK A/S. LINAK systems are high-tech products based on many years of experience in the manufacture and development of actuators, electric control boxes, controls, and chargers. We are also constantly improving our products to meet customer requirements.
This User Manual will tell you how to install, use, and maintain your LINAK TWINDRIVE
®
products.
We are sure that the TWINDRIVE® products will give you many years of trouble-free operation. Before our products leave the factory they undergo a full function and quality test. Should you nevertheless experience problems with your systems, you are always welcome to contact our service departments or service centres.
LINAK subsidiaries and distributors all over the world have authorised service centres, which are always ready to help you.
LINAK provides a warranty on all its products. This warranty, however, is subject to correct use in accordance with the specifi cations, maintenance being done correctly, and any repairs being carried out at a service centre, which is authorised to repair LINAK products.
Changes in installation and use of LINAK systems can affect their operation and durability. Therefore, changes must only be made according to agreement with LINAK A/S and changes are made at your own risk.
LINAK A/S
4
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
5
Important information
Important information on LINAK® products can be found under the following headings. Please read and understand these instructions for proper operation. Be sure to keep this instruction manual handy for future reference.
Warning!
Failure to comply with these instructions may result in accidents involving serious personal injury.
Failing to follow these instructions can result in the product being damaged or being ruined.
For household / residential use only
Safety instructions
Safe use of the system is possible only when the operating instructions are read completely and the instructions contained are strictly observed.
Failure to comply with instructions marked with the ”NOTE” symbol may result in serious damage to the system or one of its components.
Persons who do not have the necessary experience or knowledge of the product/ products must not use the product/products. Besides, persons with reduced physical or mental abilities must not use the product/products, unless they are under surveillance or they have been thoroughly instructed in the use of the apparatus by a person who is responsible for the safety of these persons.
Moreover, children must be under surveillance to ensure that they do not play with the product.
It is important for everyone who is to connect, install or use the systems to have the necessary information and access to this User Manual.
If there is visible damage on the product it must not be installed
Before installation, de-installation or troubleshooting:
• Stop the TD3.
• Switch off the power supply and pull out the mains plug.
• Relieve the TD3 of any loads, which may be released during the work.
6
Before start-up:
• Make sure that the system has been installed as instructed in this User Manual.
• Make sure that the voltage is correct before the system is connected to the mains. (See TD3 label on page 22).
• System connection. The individual parts must be connected before connection to the mains.
During operation
• Take care that the cables are not damaged or get jammed.
• The products must only be used in an environment, which corresponds to their IP protection or where no IP protection is required.
Repairs
In order to avoid the risk of malfunction, all TWINDRIVE® repairs must only be carried out by authorised LINAK workshops or repairers, as special tools must be used and special gaskets must be fi tted. TWINDRIVE under warranty must also be returned to authorised LINAK workshops.
Warning!
If any of the TWINDRIVE® products are opened, there will be a risk of subsequent malfunction. Furthermore, the warranty will not cover, when
the product has been opened by unautorised personnel.
The TWINDRIVE® systems do not withstand cutting oil.
• Statement – for all intentional and unintentional radiators: Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Statement for digital devices for Class B: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre­quency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip­ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
7
Misc. on the TD3 TWINDRIVE® system
This system is a TWINDRIVE system developed for leisure beds and for indoor use in private homes.
Warranty
There is 36 months’ warranty on the TWINDRIVE faults calculated from the production date of the individual products (see label). LINAK A/S’ warranty is only valid in so far as the equipment has been used and main­tained correctly and has not been tampered with. Furthermore, the system must not be exposed to violent treatment. In the event of this, the warranty will be ineffective/ invalid. For further details, please see LINAK A/S’ ordinary conditions of sale.
Maintenance
Clean dust and dirt on the outside of the system, at appropriate intervals and inspect them for damage and breaks. Inspect the connections, cables and plugs and check for correct functioning as well as fi xing points.
The cleaners and disinfectants must not be highly alkaline or acidic (pH value 6-8).
It is not allowed to use solvents for cleaning up.
Max. load running head and foot end motors at the same time in upward direction is 350 Nm on Head motor, and 200 Nm on Foot end motor.
®
products against manufacturing
For customers in the US/Canada:
The mains cable for this product has a polarised plug (one blade is wider than the other). It will only fi t in a polarised outlet one way. If it does not fi t fully in the outlet, reverse the plug. If it still does not fi t, contact a qualifi ed electrician to install a proper outlet. Do not change the plug in any way.
Description of the TWINDRIVE® TD3 system
Each TWINDRIVE® TD3 unit consists of 2 internal motors and a built-in control, which makes it a very compact unit. The mains cable is exchangeable. Only the handset must be paired.
Application of the TWINDRIVE® TD3 system: Irrespective of the load the Duty cycle: 10% ~ 3 min./ hour or max. 2 min. at continous use followed by 18 min. not in use.
Do not turn on the system if it is not mounted in a bed.
8
Mounting guidelines for the TWINDRIVE® system
Place the TD3 below the twist brackets/“arms” of the bed
Mount the TD3 and slide the closing devices over the gaps and make sure that the closing devices are in place before the TD3 is used.
9
Functional description
Transmitter HB10:
Transmitter HB20:
1
2
3
Up – down head motor Up – down foot motor Simultaneous up/down
Up – down head motor Up – down foot motor up to 3 extra channels
common operation up/down (option)
Memory positions (3 positions)
S
Store Button
Light Button
How to store
• Drive to the desired position
• Push “S”
• Immediately afterwards the desired memory position must be pushed (1, 2 or 3)
• The position is now stored
Drive to stored memory position
Push (1, 2 or 3) keep the button down until the position has been reached.
10
Loading...
+ 22 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use