LINAK A S 13EAXBE User Manual

TWINDRIVE

®

TD3.2 / TD3.3

To learn more about LINAK please visit:

WWW.LINAK.COM

2

Contents

Preface ................................................................................................................................................................. 4

Important information ....................................................................................................................................... 5

Safety instructions .............................................................................................................................................. 5

Before installation, reinstallation or troubleshooting ..................................................................................... 5

Before start-up .................................................................................................................................................... 5

During operation ................................................................................................................................................ 6

Repairs ................................................................................................................................................................. 6

Misc. on the TD3 TWINDRIVE

Description of the TWINDRIVE® TD3 system ..................................................................................................... 7

Mounting guidelines for the TWINDRIVE® system ........................................................................................... 8

Functional description ........................................................................................................................................ 9

Handset for massage ..........................................................................................................................................10

Child lock .............................................................................................................................................................12

Start-up - How to install RF handset .................................................................................................................13

Connections .........................................................................................................................................................14

Changing of batteries .........................................................................................................................................13

Disposal of batteries ...........................................................................................................................................16

Welding the twist bracket on the frame ..........................................................................................................17

Mounting instructions for the massage motor ...............................................................................................18

Labels ................................................................................................................................................................. 19

Disposal of LINAK’s products .............................................................................................................................20

Drawing appendix ..............................................................................................................................................21

Manufacturer’s declaration ................................................................................................................................23

LINAK application policy ....................................................................................................................................23

Addresses ............................................................................................................................................................24

®

system............................................................................................................... 7

3

Preface

We are delighted that you have chosen a product from LINAK A/S. LINAK
systems are high-tech products based on many years of experience in the
manufacture and development of actuators, electric control boxes, controls,
and chargers. We are also constantly improving our products to meet
customer requirements.

This User Manual will tell you how to install, use, and maintain your LINAK
TWINDRIVE® products.

We are sure that the TWINDRIVE® products will give you many years of
trouble-free operation. Before our products leave the factory they undergo
a full function and quality test. Should you nevertheless experience
problems with your systems, you are always welcome to contact our service
departments or service centres.

LINAK subsidiaries and distributors all over the world have authorised
service centres, which are always ready to help you.

LINAK provides a warranty on all its products. This warranty, however, is
subject to correct use in accordance with the specifi cations, maintenance
being done correctly, and any repairs being carried out at a service centre,
which is authorised to repair LINAK products.

Changes in installation and use of LINAK systems can affect their operation
and durability. Therefore, changes must only be made according to
agreement with LINAK A/S and changes are made at your own risk.

LINAK A/S

4

Important information

Important information on LINAK® products can be found under the
following headings:

Warning!

Failure to comply with these instructions may result in accidents
involving serious personal injury.

Failing to follow these instructions can result in the product being
damaged or being ruined.

Safety instructions

Safe use of the system is possible only when the operating instructions are
read completely and the instructions contained are strictly observed.

Failure to comply with instructions marked with the ”NOTE” symbol may
result in serious damage to the system or one of its components.

Persons who do not have the necessary experience or knowledge of the
product/products must not use the product/products. Besides, persons with
reduced physical or mental abilities must not use the product/products,
unless they are under surveillance or they have been thoroughly instructed
in the use of the apparatus by a person who is responsible for the safety of
these persons.

Moreover, children must be under surveillance to ensure that they do not
play with the product.

It is important for everyone who is to connect, install or use the systems
to have the necessary information and access to this User Manual.

If there is visible damage on the product it must not be installed

Before installation, de-installation or troubleshooting:

• Stop the TD3.

• Switch off the power supply and pull out the mains plug.

• Relieve the TD3 of any loads, which may be released during the work.

Before start-up:

• Make sure that the system has been installed as instructed in this User
Manual.

• Make sure that the voltage is correct before the system is connected to
the mains. (See TD3 label on page 10).

• System connection. The individual parts must be connected before
connection to the mains.

5

(continued)

During operation

• Take care that the cables are not damaged or get jammed.

• The products must only be used in an environment, which corresponds to
their IP protection or where no IP protection is required.

Repairs

In order to avoid the risk of malfunction, all TWINDRIVE® repairs must only be
carried out by authorised LINAK workshops or repairers, as special tools must
be used and special gaskets must be fi tted. TWINDRIVE under warranty must
also be returned to authorised LINAK workshops.

Warning!

If any of the TWINDRIVE® products are opened, there will be a risk of
subsequent malfunction. Furthermore, the warranty will not cover, when

the product has been opened by unautorised personnel.

Warning!

The TWINDRIVE® systems do not withstand cutting oil.

• Statement – for all intentional and unintentional radiators:
Changes or modifi cations not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

• Statement for Digital devices for Class B:
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not in-stalled and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

- Consult the dealer or an experienced radio/ TV technician for help.

6

Misc. on the TD3 TWINDRIVE® system

This system is a TWINDRIVE system developed for leisure beds and for indoor
use in private homes.

Warranty

There is 36 months’ warranty on the TWINDRIVE
against manufacturing faults calculated from the production date of the
individual products (see label). LINAK A/S’ warranty is only valid in so far as
the equipment has been used and maintained correctly and has not been
tampered with. Furthermore, the system must not be exposed to violent
treatment. In the event of this, the warranty will be ineffective/invalid. For
further details, please see LINAK A/S’ ordinary conditions of sale.

Maintenance

Clean dust and dirt on the outside of the system, at appropriate intervals and
inspect them for damage and breaks.
Inspect the connections, cables and plugs and check for correct functioning as
well as fi xing points.

Check emergency lowering batteries yearly for their full capacity.
If not, they have to be changed. Type 9V 6F22 or 6LR61.

The cleaners and disinfectants must not be highly alkaline or acidic
(pH value 6-8).

®

products TD3 and HB20

It is not allowed to use solvents for cleaning up.

Max. load running head and foot end motors at the same time in
upward direction is 350 Nm on Head motor, and 200 Nm on Foot end
motor.
If massage motors are running at the same time, the load limit is
reduced.

Description of the TWINDRIVE® TD3 system

Each TWINDRIVE® TD3 unit consists of 2 internal motors and a built-in control,
which makes it a very compact unit. The mains cable is exchangeable. Only
the handset must be paired.

Application of the TWINDRIVE® TD3 system:
Irrespective of the load the Duty cycle: 10% ~ 3 min./ hour or max. 2 min. at
continous use followed by 18 min. not in use.

Do not turn on the system if it is not mounted in a bed.

7

Mounting guidelines for the TWINDRIVE® system

g

uidelines for the TWINDRIVE

system

Place the TD3 below the twist brackets/ “arms” of the bed

Mount the TD3 and slide the closing devices over the gaps and make sure
that the closing devices are in place before the TD3 is used.

8