Linak TwinDrive TD3.2, TwinDrive TD3.3, HOMELINE TWINDRIVE TD3.2, HOMELINE TWINDRIVE TD3.3 User Manual

TWINDRIVE

®

TD3.2 / TD3.3

To learn more about LINAK please visit:

WWW.LINAK.COM

USER MANUAL

2

3

Preface ................................................................................................................................................................. 4

Important information ....................................................................................................................................... 5

Safety instructions .............................................................................................................................................. 5

Before installation, reinstallation or troubleshooting ..................................................................................... 5

Before start-up .................................................................................................................................................... 5

During operation ................................................................................................................................................ 6

Repairs ................................................................................................................................................................. 6

Misc. on the TD3 TWINDRIVE

®

system............................................................................................................... 7

Description of the TWINDRIVE® TD3 system ..................................................................................................... 7

Mounting guidelines for the TWINDRIVE® system .................................................................................... 8

Functional description ............................................................................................................................... 9

Handset for massage.................................................................................................................................10

Child lock..................................................................................................................................................12

Start-up - How to install the RF handset ....................................................................................................13

Disturbance of RF signals...........................................................................................................................14

Connections..............................................................................................................................................15

Mounting instructions for the massage motor ..........................................................................................16

Accessories ..............................................................................................................................................18

Changing of batteries ...............................................................................................................................20

Emergency lowering function: (optional) ...................................................................................................20

Welding the twist bracket on the frame ...................................................................................................22

Labels ................................................................................................................................................................. 23

Disposal of LINAK’s products .............................................................................................................................23

Disposal of batteries ...........................................................................................................................................25

Drawing appendix ..............................................................................................................................................25

Manufacturer’s declaration ................................................................................................................................30

LINAK application policy ....................................................................................................................................31

Addresses ............................................................................................................................................................32

Contents

4

Preface

We are delighted that you have chosen a product from LINAK A/S. LINAK systems
are high-tech products based on many years of experience in the manufacture and
development of actuators, electric control boxes, controls, and chargers. We are
also constantly improving our products to meet customer requirements.

This User Manual will tell you how to install, use, and maintain your LINAK
TWINDRIVE

®

products.

We are sure that the TWINDRIVE® products will give you many years of trouble-free
operation. Before our products leave the factory they undergo a full function and
quality test. Should you nevertheless experience problems with your systems, you
are always welcome to contact our service departments or service centres.

LINAK subsidiaries and distributors all over the world have authorised service
centres, which are always ready to help you.

LINAK provides a warranty on all its products. This warranty, however, is subject to
correct use in accordance with the specifi cations, maintenance being done correctly,
and any repairs being carried out at a service centre, which is authorised to repair
LINAK products.

Changes in installation and use of LINAK systems can affect their operation and
durability. Therefore, changes must only be made according to agreement with
LINAK A/S and changes are made at your own risk.

LINAK A/S

5

This device complies with part
15 of the FCC Rules. Operation
is subject to the following two
conditions:

(1) This device may not cause
harmful interference, and

(2) This device must accept any
interference received,
including interference
that may cause undesired
operation.

6

Safety instructions

Important information

Important information on LINAK® products can be found under the following
headings. Please read and understand these instructions for proper operation.
Be sure to keep this instruction manual handy for future reference.

Safe use of the system is possible only when the operating instructions are read
completely and the instructions contained are strictly observed.

Failure to comply with instructions marked with the ”NOTE” symbol may result in
serious damage to the system or one of its components.

Persons who do not have the necessary experience or knowledge of the product/
products must not use the product/products. Besides, persons with reduced
physical or mental abilities must not use the product/products, unless they are
under surveillance or they have been thoroughly instructed in the use of the
apparatus by a person who is responsible for the safety of these persons.

Moreover, children must be under surveillance to ensure that they do not play
with the product.

It is important for everyone who is to connect, install or use the systems to
have the necessary information and access to this User Manual.

If there is visible damage on the product it must not be installed

Warning!

Failure to comply with these instructions may result in accidents involving
serious personal injury.

Failing to follow these instructions can result in the product being
damaged or being ruined.

For household / residential use only

Before installation, de-installation or troubleshooting:

• Stop the TD3.

• Switch off the power supply and pull out the mains plug.

• Relieve the TD3 of any loads, which may be released during the work.

Warning!

If any of the TWINDRIVE® products are opened, there will be a risk of
subsequent malfunction. Furthermore, the warranty will not cover, when

the product has been opened by unautorised personnel.

The TWINDRIVE® systems do not withstand cutting oil.

• Statement – for all intentional and unintentional radiators:
Changes or modifi cations not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

• Statement for digital devices for Class B:
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio fre­quency energy and, if not in-stalled and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equip­ment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

- Consult the dealer or an experienced radio/ TV technician for help.

Repairs

In order to avoid the risk of malfunction, all TWINDRIVE® repairs must only be
carried out by authorised LINAK workshops or repairers, as special tools must be
used and special gaskets must be fi tted. TWINDRIVE under warranty must also be
returned to authorised LINAK workshops.

Before start-up:

• Make sure that the system has been installed as instructed in this User Manual.

• Make sure that the voltage is correct before the system is connected to the mains.
(See TD3 label on page 22).

• System connection. The individual parts must be connected before connection to
the mains.

During operation

• Take care that the cables are not damaged or get jammed.

• The products must only be used in an environment, which corresponds to their IP
protection or where no IP protection is required.

7

8

Misc. on the TD3 TWINDRIVE® system

This system is a TWINDRIVE system developed for leisure beds and for indoor use in
private homes.

Warranty

There is 36 months’ warranty on the TWINDRIVE

®

products against manufacturing
faults calculated from the production date of the individual products (see label).
LINAK A/S’ warranty is only valid in so far as the equipment has been used and main­tained correctly and has not been tampered with. Furthermore, the system must not
be exposed to violent treatment. In the event of this, the warranty will be ineffective/
invalid. For further details, please see LINAK A/S’ ordinary conditions of sale.

Maintenance

Clean dust and dirt on the outside of the system, at appropriate intervals and
inspect them for damage and breaks.
Inspect the connections, cables and plugs and check for correct functioning as well
as fi xing points.

The cleaners and disinfectants must not be highly alkaline or acidic
(pH value 6-8).

It is not allowed to use solvents for cleaning up.

Max. load running head and foot end motors at the same time in upward
direction is 350 Nm on Head motor, and 200 Nm on Foot end motor.

For customers in the US/Canada:

The mains cable for this product has a polarised plug (one blade is wider
than the other). It will only fi t in a polarised outlet one way. If it does not fi t
fully in the outlet, reverse the plug. If it still does not fi t, contact a qualifi ed
electrician to install a proper outlet. Do not change the plug in any way.

Description of the TWINDRIVE® TD3 system

Each TWINDRIVE® TD3 unit consists of 2 internal motors and a built-in control,
which makes it a very compact unit. The mains cable is exchangeable. Only the
handset must be paired.

Application of the TWINDRIVE® TD3 system:
Irrespective of the load the Duty cycle: 10% ~ 3 min./ hour or max. 2 min. at
continous use followed by 18 min. not in use.

Do not turn on the system if it is not mounted in a bed.

Mounting guidelines for the TWINDRIVE® system

Place the TD3 below the twist brackets/“arms” of the bed

Mount the TD3 and slide the closing devices over the gaps and make sure that the
closing devices are in place before the TD3 is used.

9

10

Functional description

Transmitter HB10:

Up – down head motor
Up – down foot motor
Simultaneous up/down

How to store

• Drive to the desired position

• Push “S”

• Immediately afterwards the desired memory position must be pushed (1, 2 or 3)

• The position is now stored

Drive to stored memory position

Push (1, 2 or 3) keep the button down until the position has been reached.

Transmitter HB20:

common operation up/down (option)

Store Button

Memory positions
(3 positions)

3

2

1

S

Up – down head motor
Up – down foot motor
up to 3 extra channels

Light Button