Linak CB08-XA, CH08 User Manual

PRODUCT DATA SHEET

BATTERY CHARGER CH08

Features:

• For charging of the batteries of the control box CB08-XA, directly connected to the control box or via the handset HB40A.

• For charging CB7 directly or charging the BA18 via a CB7 system

• For charging of the batteries in battery box BAJ2 (JUMBO system)

• Mains: 240V/230V/120V/100V/50-60 Hz

• Charging voltage: 27.6 V DC ± 2%

• Charging current. Max. 300 mA

• Colour: Black

• Cable: 2000 mm with DC-plug (5.0 x 2.5)

Order number: CH08 + specification of mains volt- age and type of main plug:

240V/50 Hz: English plug 240V/50 Hz: Australian plug 230V/50 Hz: Euro plug 100V/50 Hz: Japanese plug 120V/60 Hz: American/UL plug

• Approved according to VDE 0750

Please be aware that CH08 is not approved for use in the patient area.

Specifications subject to change without prior notice. It is the responsibility of the product user to determine the suitability of LINAK A/S products for a specific application. LINAK will at point of delivery replace/repair defective products covered by the warranty if promptly returned to the factory. No liability is assumed beyond such replacement/repair.