Page 1
COLOR TFT LCD
M
ONIT
OR
User
Manual
Page 2
IMPORTANT
SAFETY
INSTR
UC
TIONS:
Please read manual before using this product.
Please keep manual for future reference.
Please read the cautions to prevent possible danger and loss of property
Please enjoy the benefits of convenience, safety, and space-saving from this
TFT LCD monitor in different ways.
CAUTION
S：
1. Please do not place the display screen toward the ground.
2. Please avoid heavy impact or drop onto the ground.
3. It should avoid the humidity and extreme temperature
4. Do not place with your equipment or accessory and other inflammable liquid,
the gas or other explosive articles place together, to avoid happening
dangerous.
5. The LCD screen is very easy to shave a wound, avoid crashing please. Be sure
not to use other sharp article to bump against touch screen.
6. Please do NOT use chemical solutions to clean this product. Please wipe with
a clean soft cloth to maintain the brightness of the surface.
7. Please do not block any vent hole.
8. Please follow the instructions and trouble-shootings to adjust the product.
Other improper adjustment may result in damage. Any further adjustment
must be performed or conducted by a qualified technician.
9. Please unplug the power or remove the battery if long-term no-use, or thunder
weather.
Conte
nts
1 PRODUCT
DESCRIPTION
.......................................................................... 2
2
INSTALLATION
OF SUNSHADE COVER AND BATTERY PLATE
....... 4
3 MENU SETTING
........................................................................................... 7
4
ACCESSORIES:
........................................................................................... 11
5
PARAMETERS:
........................................................................................... 12
6 TROUBLE SHOOTING...............................................................................
13
Page 3
1 PRODUCT
DESC
RIP
TION
Positive:
1.
Speaker.
2. Power indicator light：Light turns red when powered.
3. ◄ Left selection key, to select items on OSD menu and value option
adjustment; Press to adjust the brightness, sharpness, contrast, saturation,
volume and Tint value decrease (Tint adjustment is only available under
VIDEO and NTSC mode).
4. ► Right selection key, to select items on OSD menu, value option
adjustment and confirmation; Press to adjust the brightness, sharpness,
contrast, saturation, volume and Tint value increase (Tint adjustment is only
available under VIDEO and NTSC mode).
5. MENU：To activate OSD (on-screen display) menu. Select switch the
brightness, sharpness, contrast, saturation, volume, MENU and Exit.
6. ▲/5D-Ⅱ：Up selection key, to select items on OSD menu; Press to switch ON/
OFF 5D-Ⅱor
5D-Ⅲ mode.
Page 4
7. / ：Down selection key, to select items on OSD menu; Press to
switch ON/OFF pixel-to-pixel mode.
8. F1-F4：4 user-definable buttons：
Default f
unct
ion:
F1: Peaking F2: False
Colors
F3:
Exposure F4:
Histogram
9. Earphone jack.
Back:
10. Mini USB input. (Only for program upgrades, do NOT use if
non-professionals).
11.
Battery plate slot.
12. HDMI signal input.
13. HDMI signal loop output. (Optional)
14. DC 12V power input.
15. Battery power on/off switch: “‖
” is battery power; “O” is power off; “|” is DC
power.
16. VESA Mounting interface
Page 5
2
INSTALLATION
OF SUNS
HADE
COVER AND BATTERY PLATE
Installation
of sunshade cover：
Installation
steps
Installation comple
ted
Disassembly of sunshade cover：
Disassembly steps： Disassembly comple
ted
：
Page 6
Steps of sunshade cover on / o
ff:
* Please follow the
instructions
steps,
or
may damage the
cover.
Open Step: Closed ste
ps:
* Do not press the edge in the
under
of the
cover,
otherwise it will resu
lt
in open
failure.
Installation
of Battery and Battery Mount Plate
Page 7
The included three types of battery plate are suitable for this device, Standard
accessories model: F970.
DV Battery Mount Plate S
pec
ific
ation:
Model DU21 for battery of Panasonic DV:
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with
Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
Model QM91D for battery of SONY DV:
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV11
6/DCR-DVD/PS105K/300K/10P/1E series.
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.
Page 8
3
MEN
U S
ET
TING
*Before setting the functions, please make sure the device is
connected
corr
ect
ly.
1.
Shortcut keys:
1-1. the image menu
When power on, press “
◄/►
” key on the device, Will appear at the bottom of
the screen display of the brightness, Then press the MENU button to select
brightness, sharpness, contrast, saturation, volume, MENU and Exit. Required
by the user according to personal to User can adjust the parameters of the
selected menu with ◄ / ► button, according to their requirements.
1-2. Switch on / off
5D-Ⅱor
5D-Ⅲ camera
mode
Connecting the HDMI input interface with Canon5D-Ⅱor
5D-Ⅲcamera,
and
check whether camera mode in the menu setup as 480P（5D-II mode）/1080I（5D-
Ⅲ
mode ） or not, according to camera's mode1 NO.. Power on, then press
the▲ / 5D-Ⅱ button to switch on/off 5D-Ⅱor
5D-Ⅲ camera mode.
1-3. Pixel-to
-Pi
xel
Turn on the power, press the / button to switch on/off pixel-to-pixel
function.
1-4. F1-F4 4 user-d
efinable function buttons:
Functions of F1-F4 buttons can also be customized: Aspect Ratio, Check
Field, Freeze Input, Center Marker, Underscan, H/V delay, Color Bar, Screen
Marker, Zoom, Peaking, False color, Exposure and Histogram.
F1-F4：4 user-definable function buttons.
Default f
unct
ion:
F1: Peaking F2: False color
F3:
Exposure F4:
Histogr
am
Page 9
2. MENU
Setting
When power on, press “MENU” on the device. The menu of function setting will
display on the screen.
Press ◄/► buttons on the choose main menu the display. Then press▲/ key,
Selection screen displayed on the sub-menu options; then ► to confirm the
selection and adjustment of option value. After confirmation the main menu press
the MENU key to return.
IT
EMS
OPT
IONS
6500ºK/7500 ºK/9300 ºK/User
Red
Green
Color Temp
Blue
Note: Only can available
under “User” mode to meet
the color value you need.
Check Field
OFF，MONO，Red, Green and Blue
Aspect Ratio Full Screen,4:3 and 16:9
Pixel-to-Pixel ON/OFF
Camera
480P
(5D-II Mode)
/ 1080I
(5D-Ⅲ Mode)
H/V delay OFF,H&V Delay, V Delay and H Delay
Underscan ON/OFF
Page 10
IT
EMS
OPT
IONS
Center Marker ON/OFF
Screen Markers OFF, 95%,93%,90%,88%,85% and80%
ITEMS E
OPT
IONS
Language English /Chinese
Input Format OSD
5S、10S、15S
LOGO ON/OFF
Freeze Input ON/OFF
Image Flip ON/OFF
Peaking Color / Mono
Assistant Func. Manual/Auto
Manufacturer Default OK/Cancel
ISP For program upgrades (such as accidentally
press to reboot your computer)
Page 11
Functions of F1-F4 buttons can also be customized: Aspect Ratio, Check
Field, Freeze Input, Center Marker, Underscan/Overscan, H/V delay, Color
Bar, Screen Marker, Zoom, Peaking, False color, Exposure and Histogram.
Note: Off, camera, X2, X4 and X8 options can be set when zoom function customized
as shortcut key.
Page 12
4
AC
CE
SSORIES:
Standard
acc
esso
ries:
1. Flexible folding sun shade cover 1 piece
2. DC adapter 1 piece
3. HDMI
Type
A-C 1 piece
4. Manual 1 piece
5. Battery Plate: F-970 1 piece
6. Shoe mount (for camera only) 1 piece
Optional
acc
esso
ries:
1. Battery Plate: DU21 1piece
2. Battery Plate: QM91D 1piece
3. Li-ion battery 1piece
4
. VESA 75mm rail slot
1piece
Page 13
5 PAR
AME
TE
RS:
Panel Size
7’’ TFT LCD
Resolution
1024×600,
up to
192
0×1080
Bri
ght
ness
250
cd/
㎡
Contr
ast
800:1
Viewing Angle
160°/ 150°
(H/V)
Input Voltage
DC
12V
Input
Signal HDMI
Output Si
gnal
HDMI (optional)
DV B
atte
ry
F9
70/DU21
/QM
91D(optional)
Battery Plate F970,
DU21/QM91D(optional)
Curr
ent
800mA
Power
Consumption
≤10W
Working Temper
ature
-20
℃〜60℃
Storage Temperature
-30
℃〜70℃
Si
ze:(LWD)
196
.5×145×31mm
196.5×145×41mm (with
sun
shade closed)
196.5×145×151.3mm (with
sun
shade open)
Weight
505g
655g (with c
over)
Page 14
6 TROUBLE S
HOOTING
1. Only black-and-white display:
Check whether the color saturation is properly setup.
2. Power on but no pictures:
Check whether the cables of HDMI correctly connected. Please use the standard
power adapter coming with the product package. Improper power input may
cause the device.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected. Broken or loose
pins of the cables may cause a bad connection.
4. According to the ISP, the machine can not function properly
ISP for program upgrades, non-professionals do not use. If accidentally press
this key, restart the system.
Note:
It’s a normal phenomenon to see bright stripe when power off.
Due to constant
effort
to improve products and
product features,
specifications may change without
not
ice.
Page 15
Loading...