Page 1
TFT LCD
COLOR
MON
IT
OR
Page 2
DEAR
CUSTOMERS
Thank you for purchasing the liquid crystal display monitor. This product employs
new integrate circuits and high quality TFT LCD modules. It is putting out with its
low power consumption, emits no radiation, and other advantage characteristics. This
product is shaped with modern style and is easy to be carried with. The color TFT
LCD is the most suitable display for VGA,VCD, DVD and GPS system for motorcars
and ships .It also can be used in the office ,in flat ,at home also in other suitable
position. You will certainly benefit from this monitor in lots of ways, to name some of
them: convenience, safety, space-saving.
We hope that you will have the enjoyment of your new mini color TFT LCD.
To ensure the
best use of the unit,
please r
ead
this handbook
carefully b
eforehan
d.
CAUTION
1. Please use the adapter attached in the accessory.
2. Do not expose this product to direct sunlight, heat or humid conditions.
3. Keep away from strong light while using this product so as to obtain the
clearest and the most colorful picture.
4. Please avoid heavy impact or drop onto the ground.
5. Do not use chemical solutions to clean this unit. Please simply wipe with a
clean soft cloth to keep the brightness of the surface.
6. If the product does not operate normally when the instructions are followed.
Adjust only those controls that are covered by the instructions. Improper
adjustment of other controls may result in damage and will often require
extensive work of a qualified technician.
Page 3
CONTENTS
1. PRODUCT DESCRIPTION --------------------
2. REMOTE CONTROLLER ---------------------
3. MATCHED CABLES-------------------------
4. MENU OPERATION ----------------------------
IN AV MODE--------------------------------------
IN PC MODE--------------------------------------
IN DVI&HDMI MODE--------------------------
5. ACCESSORIES ------------------------------------
6. PARAMETER --------------------------------------
7. TROUBLESHOOTING ---------------------------
8. REMARK----------------------------------------
Page 4
1. PRODUCT
DESCRIPTION
Pic
ture
Model 1:
Page 5
1. POWER：Power on/off
2. Infrared receiving window
3. A/V: PC、DVI、VIDEO1、VIDEO2、HDMI switch
4.〈: Selection key, to select item on the OSD or push the key in PC mode
directly to adjust phase automatically
5.〉: To select function on OSD or to adjust the brightness directly under 6
classes
6. MENU: To activate OSD menu
（ PS: Long press
"MENU"
button to zoom in
or
out
picture
automatically
when rece
iving HDMI
signal
.)
7. -: Volume down or to adjust the value of menu setting function
8. +: Volume up or to adjust the value of menu setting function
9. Power : DC 12V
10. DVI、HDMI input
11. 14P SKS input
12. Touch pen
Page 6
Model
2:
Page 7
1. Infrared receiving Window
2. < : Selection key, to select item on the OSD or push the key in PC mode
directly to adjust phase automatically
3. >: To select function on OSD or to adjust the brightness directly
4. MENU: To activate OSD menu
（
PS: Long press
"MENU"
button to show PC/DVD
picture sw
itch
when
r
eceiving HDMI signal, the initial mode is DVD.)
5. +: Volume up or to adjust the value of menu setting function
6. - : Volume down or to adjust the value of menu setting function
7. A/V: PC、DVI、VIDEO1、VIDEO2、HDMI switch
8. POWER：Power on/off
9. Power : DC 12V
10. HDMI input
11. 14P SKS input
12. Touch pen
Page 8
2. REMOTE
CON
TROL
1. MUTE
2. Video switch: PC、DVI、VIDEO1、VIDEO2、HDMI switch
3. : Left move，Volume down or to adjust the value of setting
function
4. : Down move, to select function on OSD
5. POWER ON/OFF
6.
：
UP move, To select function on OSD
7. MENU
8. : Right move, Volume up or to adjust the value of setting
function
Page 9
3. MATCHED CABLES
Match cable
SKS
cable:
1 14P SKS Input Jack : all kinds of AV signal input ,note that put it correctly into the
SKS input jack of the monitor
2 Black 9-pin VGA signal input jack
3 Yellow RCA :Video signal 1 input
4 Yellow RCA :Video signal 2 input
5 White RCA :Audio signal input
6 Black Jack :DC 12V Power input
VGA
cable:
1. Black 9-pin VGA connector, contact to the 9-pin VGA signal input jack of SKS
cable.
2. USB end connect the USB port of computer for touch screen function.
3. 15-pin VGA signal input end connect VGA port of the computer
HDMI connect DVI
cable:
1. HDMI signal input end
2. DVI signal input connect with device with DVI signal
3. USB connect with the USB port of computer for touch function
Page 10
HDMI connect HDMI
cable:
1. HDMI signal input end
2. HDMI signal input connect device with HDMI signal
3. USB port connect computer for touch function
4. M
ENU OPERA
TION
After connected correctly and then Power on, Press “MENU” on the unit or by remote
control to show MENU
IN AV
MODE
Press “</>”on the unit or “ / ” on the remote control to select item, eg. ,
and it will be highlighted; and then press +/ - of the unit or / to adjust the
favorite values. It shows current picture format (NTSC&PAL) below the dialog box.
BRIGHTNESS: to adjust the luminance of brightness
CONTRAST：to adjust the level of contrast
SATURATION: to adjust the level of saturation
Page 11
TINT:
to adjust the hue of image
SHARPNESS: to adjust the level of sharpness
LANGUAGE：There are 2 languages provided for choice, English and Chinese
RESET: you can reset adjustment of the unit when click “YES”
OSD H-POSITION ADJUSTMENT: to adjust the OSD move in horizontal
direction
OSD V-POSITION ADJUSTMENT: to adjust the OSD move in vertical
direction
OSD DURATION: to adjust the duration of OSD from5-100seconds.
picture over-turn to left or right
picture over-turn to up or down
Mode shift between 4:3 and 16:9
EXIT OSD: select “YES” to exit
IN PC
MOD
E
:
Press “</>”on the unit or “ / ” on the remote control to select item, eg. ,
and it will be highlighted with yellow; and then press +/ - of the unit or / to
adjust the favorite values. It shows picture mode specifications below the dialog box.
BRIGHTNESS: to adjust the luminance of brightness
CONTRAST：to adjust the level of contrast
Page 12
PHASE：to adjust the beginning point and terminal point of image
FREQUENCY: to adjust the frequency range of image
OSD H-POSITION：to adjust the picture position in horizontal direction
OSD V-POSITION：to adjust the picture position in vertical direction
RESET: you can reset adjustment of the unit when click “YES”
COLOR TEMPERATURE：choose color and temperature at first, such as: 6500
0
K, 75000 K or 93000 K.
Only if under “USER” mode, can adjust RED, GREEN and
BLUE to meet the color value you need.
LANGUAGE：There are 2 languages provided for choice, English and Chinese
MISCELLANEOUS：to select to enter next page
As follows:
OSD
MISCEL
LAN
EOUS
OSD H-POSITION ADJUSTMENT: to adjust the OSD move in horizontal
direction
OSD V-POSITION ADJUSTMENT: to adjust the OSD move in vertical
direction
OSD DURATION: to adjust the duration of OSD from5-100seconds.
OSD AUTO COLOR：If select “YES” it will adjust automatic color system to
Page 13
the best
picture over-turn to left or right
picture over-turn to up or down
Mode shift between 4:3 and 16:9
EXIT OSD: select “YES” to exit
IN
DVI & HDMI MODE
DVI MODE
HDMI
MODE
Press “</>”on the unit or “ / ” on the remote control to select item, eg. “ ” ,
and it will be highlighted; and then press +/ - of the unit or / to adjust the
favorite values. It shows picture mode specifications below the dialog box in DVI
mode, but not in HDMI mode.
BRIGHTNESS: to adjust the luminance of brightness
CONTRAST：to adjust the level of contrast
SATURATION: to adjust the level of saturation (this function doesn’t work
Page 14
under DVI/HDMI mode)
TINT:
to adjust the hue of image (this function doesn’t work under DVI/HDMI
mode)
OSD H-POSITION ADJUSTMENT: to adjust the OSD move in horizontal
direction
OSD V-POSITION ADJUSTMENT: to adjust the OSD move in vertical
direction
RESET: you can reset adjustment of the unit when click “YES”
COLOR TEMPERATURE：choose color and temperature at first, such as: 6500
0
K, 75000 K or 93000 K.
Only if under “USER” mode, can adjust RED, GREEN and
BLUE to meet the color value you need.
LANGUAGE：There are 2 languages provided for choice, English and Chinese
MISCELLANEOUS：to select to enter next page.
As follows:
OSD
MISCELLANEOUS
OF DVI
MODE
Page 15
OSD
MISCELLANEOUS
OF HDMI
MODE
picture over-turn to left or right
picture over-turn to up or down
Mode shift between 4:3 and 16:9
EXIT OSD: select “YES” to exit
Page 16
5. ACCESS
ORIES
1
. Remote control 1piece
2. Bracket 1piece
3. Touch pen 1piece (option)
4. Drive disk 1piece (touch driver, please choose
and install correct touch driver as per
your
PC OS)
5. Home DC adapter 1piece
6. Car power cord (pass CE) 1piece
7. 14PIN SKS 1Piece
8. VGA cable 1piece (MD connect HDB 15pin VGA cable)
9. HDMI connect HDMI cable 1piece
10. HDMI connect DVI cable 1piece
11. Manual 1copy
Page 17
6. P
ARAMETER
Model 1
Model 2
Panel Size
TFT LCD 7＇＇1152000 pixels TFT LCD 8＇＇1152000 pixels
Resolution
800×480
800×480
Brightness
250cd/
㎡
250cd/
㎡
Viewing Angle 140°/ 120°(H/V) 130°/ 120°(H/V)
Input Voltage DC 12V DC 12V
Input Signal PC(VGA),AV1,AV2,HDMI,DVI PC(VGA),AV1,AV2,HDMI,DVI
Power Consumption ≤8W
≤
8W
Contrast 500:1 300:1
Size(LWD): mm
185.5mm×122mm×32mm
210mm×136mm×32mm
Weight 450g
504g
Page 18
7. TROUBLE
SHO
OT
ING
1. Only black-and-white image
Check the level of color saturation and brightness is proper.
2. Power on but no picture
Make sure the PC、DVI、VIDEO、HDMI cable is tightly connected exactly
correctly Make sure you are using the standard power adapter coming with the
monitor.
3. Wrong or abnormal colors
If any color is missing, check the cables to make sure it is securely connected.
Broken or loose pins in the cable connector can cause a bad connection.
4. Remote controller doesn't work
Check the battery to make sure the battery is installed properly and make sure it is
not a low battery. The signal is interfered by some obstructions.
5. If any abnormal matters happened, pls enter “MENU” choose to reset
6. If it can’t be touch, pls check the USB connect exactly correct or not, or install
the correct touch driver as per the PC OS ?
8. REMARK:
If
there
are still any problems, you can connect with the
related deals
*If interruptive image occurs, it maybe that the VGA signal frequency isn’t matched
with normal standard
*It is a normal condition that some bright lines appear on the screen when you turn
the unit.
Page 19
Loading...