Lilliput 619AT User Manual

TFT LCD

COLOR

MON

IT

OR

DEAR

CUSTOMERS

Thank you for purchasing the liquid crystal display monitor. This product employs

new integrate circuits and high quality TFT LCD modules. It is putting out with its

low power consumption, emits no radiation, and other advantage characteristics. This

product is shaped with modern style and is easy to be carried with. The color TFT

LCD is the most suitable display for VGA, VCD, DVD and GPS system for

motorcars and ships. It also can be used in the office, in flat, at home also in other

suitable position. You will certainly benefit from this monitor in lots of ways, to name

some of them: convenience, safety, space-saving.

We hope that you will have the enjoyment of your new mini color TFT LCD.

To ensure the

best use of the unit,

please r

ead this hand

book carefully b

eforehan

d.

CAUTION

1. Please use the adapter attached in the accessory.

2. Do not expose this product to direct sunlight, heat or humid conditions.

3. Keep away from strong light while using this product so as to obtain the

clearest and the most colorful picture.

4. Please avoid heavy impact or drop onto the ground.

5. Do not use chemical solutions to clean this unit. Please simply wipe with a

clean soft cloth to keep the brightness of the surface.

6. If the product does not operate normally when the instructions are followed.

Adjust only those controls that are covered by the instructions. Improper

adjustment of other controls may result in damage and will often require

extensive work of a qualified technician.

CONTENTS

1. PRODUCT DESCRIPTION --------------------

2. REMOTE CONTROL----------------------------

3. MATCHED CABLES-------------------------

4. MENU OPERATION ----------------------------

IN AV MODE--------------------------------------

IN PC MODE--------------------------------------

IN DVI&HDMI MODE--------------------------

5. ACCESSORIES ------------------------------------

6. PARAMETER --------------------------------------

7. TROUBLESHOOTING ---------------------------

8. REMARK----------------------------------------

1. PRODUCT

DESCRIPTION

Pic

ture

1. Indication light: Red is off, green is standby.

2. Power switch

3. A/V:

PC、DVI、VIDEO1、VIDEO2 and HDMI switch

.

4. “∨”: Volume down or to adjust the value of menu setting function

5. IR Sensor for remote control

6. “∧”: Volume up or to adjust the value of menu setting function mode

7. MENU: To activate OSD menu

（

PS: Long press

"MENU"

button to zoom in or out

picture automatically whe

n

r

ece

ivin

g HDMI

signal.)

8. “<”: Selection key, to select item on the OSD or push the key in PC mode directly to adjust
phase automatically

9. “>”: To select function on OSD or to adjust the brightness directly under 6 classes

10. DC 12V

11. DVI、HDMI input

12. 14P SKS input

2. REMOTE

CON

TROL

1. MUTE

2. Display mode switch: PC、DVI、VIDEO1、VIDEO2 and HDMI

switch

3. : Left move，Volume down or to adjust the value of setting

function

4. : Down move, to adjust phase automatically under PC mode

5. POWER: ON/OFF

6. ：UP move, to adjust the brightness directly under 6 classes

7. : Right move, Volume up or to adjust the value of setting

8. MENU

3. MATCHED CABLES

Match cable
SKS

cable:

1 14P SKS Input Jack: all kinds of AV signal input, note that put it correctly into the

SKS input jack of the monitor
2 Black 9-pin VGA signal input jack
3 Yellow RCA: Video signal 1 input
4 Yellow RCA: Video signal 2 input
5 White RCA: Audio signal input
6 Black Jack: DC 12V Power input

VGA

cable:

1. Black 9-pin VGA connector, contact to the 9-pin VGA signal input jack of SKS
cable.

2. USB end connect the USB port of computer for touch screen function.

3. 15-pin VGA signal input end connect VGA port of the computer

HDMI connect DVI cable (

opt

ional):

1. HDMI signal input end

2. DVI signal input connect with device with DVI signal

3. USB connect with the USB port of computer for touch function (optional)

HDMI connect HDMI cable (

option

al):

1. HDMI signal input end

2. HDMI signal input connect device with HDMI signal

3. USB port connect computer for touch function (optional)

4. M

ENU OPERA

TION

After connected correctly and then Power on, Press “MENU” on the unit or by

remote control to show MENU

IN AV MODE IN PC

MOD

E

:

As follows:

OSD

MISCEL

LAN

EOUS

IN DVI & HDMI

MODE

DVI MODE HDMI

MODE

As follows:

OSD

MISCELLANEOUS

OF DVI MODE OSD

MISCELLANEOUS

OF HDMI

MODE

Press “＞/＜”on the unit or “ / ” on the remote control to select item, eg. ,

and it will be highlighted; and then press ∧/ ∨of the unit or / to adjust the

favorite values. It shows current picture format (NTSC&PAL) below the dialog
box.

BRIGHTNESS: to adjust the luminance of brightness

CONTRAST：to adjust the level of contrast

SATURATION: to adjust the level of saturation

TINT:

to adjust the hue of image

SHARPNESS: to adjust the level of sharpness

LANGUAGE: There are 2 languages provided for choice, English and

Chinese

RESET: you can reset adjustment of the unit when click “YES”

OSD H-POSITION ADJUSTMENT: to adjust the OSD move in horizontal

direction

OSD V-POSITION ADJUSTMENT: to adjust the OSD move in vertical

direction

OSD DURATION: to adjust the duration of OSD from5-100seconds.

Picture over-turn to left or right

Picture over-turn to up or down

Mode shift between 4:3 and 16:9

EXIT OSD: select “YES” to exit

PHASE：to adjust the beginning point and terminal point of image

FREQUENCY: to adjust the frequency range of image

OSD H-POSITION：to adjust the picture position in horizontal direction

OSD H-POSITION：to adjust the picture position in vertical direction

COLOR TEMPERATURE：choose color and temperature at first, such as:

65000 K, 75000 K or 93000 K.

Only if under “USER” mode, can adjust RED, GREEN and

BLUE to meet the color value you need.

MISCELLANEOUS：to select to enter next page

OSD AUTO COLOR：If select “YES” it will adjust automatic color system to

the best

5. ACCESS

ORIES

1. Remote control 1piece

2. Bracket 1piece

3. Touch pen 1piece (optional)

4. Drive disk 1piece (touch driver, please choose and install

correct touch driver as per your

PC OS)

5. Home DC adapter 1piece

6. Car power (pass CE) 1piece

7. 14PIN SKS 1Piece

8. VGA cable 1piece (MD connect HDB 15pin VGA cable)

9. HDMI to HDMI cable 1piece (optional)

10. HDMI to DVI cable 1piece (optional)

11. Manual 1copy

6. P

ARAM

ET

ER

Panel Size 7” TFT LCD

Resolution

800×480

Brightness

450cd/

㎡

Contrast 500:1

Viewing Angle 140°/ 120°(H/V)

Input Voltage DC 12V

Input Signal PC(VGA),AV1,AV2,HDMI,DVI

Power Consumption ≤8W

Size(LWD):

187mm×128mm×33.4mm

7. TROUBLE

SHO

OT

ING

1. Only black-and-white image

Check the level of color saturation and brightness is proper.

2. Power on but no picture

Make sure the PC、DVI、VIDEO、HDMI cable is tightly connected exactly

correctly Make sure you are using the standard power adapter coming with the

monitor.

3. Wrong or abnormal colors

If any color is missing, check the cables to make sure it is securely connected.

Broken or loose pins in the cable connector can cause a bad connection.

4. Remote controller doesn't work

Check the battery to make sure the battery is installed properly and make sure it

is not a low battery. The signal is interfered by some obstructions.

5. If any abnormal matters happened, pls enter “MENU” choose to reset

6. If it can’t be touch, pls check the USB connect exactly correct or not, or install

the correct touch driver as per the PC OS?

8. REMARK:

If

there

are still any problems, you can connect with the

related deals

*If interruptive image occurs, it maybe that the VGA signal frequency isn’t

matched with normal standard

*It is a normal condition that some bright lines appear on the screen when you turn

the unit.

Note: due to constant

effort

to improve products and

product

features,

specifications may change without

not

ice.