Lilliput 569-O/P User Manual

COLOUR TFT

LCD

MONIT

O

R

Use

r Manu

al

I

MPORTANT

SAFETY INSTRUCTIONS:

 Please read manual before using this product.
 Please keep manual for future reference.
 Please read the cautions to prevent possible danger and loss of property
 Please enjoy the benefits of convenience, safety, and space-saving from this

TFT LCD monitor in different ways.

P

ROD

UC

TS:

 This product employs integrate circuits, lower power consumption, and lower

radiation emission. It has fashion designed appearance and good portability.

 With peaking, false color, exposure and histogram functions

 HDMI & YPbPr Input, to connect with Full HD Video Camera.

 LED backlight display, supports 1920×1080 HD resolution.

 With sun shade to see clearly under sunshine.

 Center Marker, Screen Marker, RGB, mono and color display, 16:9、4:3and

full screen aspect ratio switch, underscan/overscan switch, HDMI & Video

signal loop output.

CAUTION

S：

1. Please do not place the display screen toward the ground.

2. Please avoid heavy impact or drop onto the ground.

3. Please do NOT use chemical solutions to clean this product. Please wipe with

a clean soft cloth to maintain the brightness of the surface.

4. Please do not block any vent hole.

5. Please follow the instructions and trouble-shootings to adjust the product.
Other improper adjustment may result in damage. Any further adjustment
must be performed or conducted by a qualified technician.

6. Please unplug the power and remove the battery if long-term no-use, or
thunder weather.

PRODUCT

DESC

RIP

TION

1. EAR: Earphone jack

2. POWER: ON/OFF (light turns red when standby, turns green when

working)

3. VIDEO: Indicator lights up when signal switch to video state.

4. YPbPr: Indicator lights up when signal switch to YPbPr state.

5. HDMI: Indicator lights up when signal switch to HDMI state.

6. F1、F2、F3、F4：user-definable function buttons: mark, underscan, color

mode, ratio, camera, peaking, false color, exposure and histogram.

Defaul

t:

F1: PEAKING

F2: FALSE COLOR

F3: EXPOSURE

F4: HISTOGRAM

7. Knob BRI/M/SEL: Press the knob to access the menu function, pressing

the knob in the menu to return to the previous page or exit the

menu.Rotate knob to select an option. (Default: Brightness function,

rotate the knob to adjust the brightness directly.)

8. Knob VOL/ADJ: Rotate knob to confirm the selection and adjust the

parameter values. (Default: Sound function, turn the knob to adjust the

volume)

9. Sun shade cover

10. Mounting socket (left side)

11. Video signal output

12. Video signal input

13. Audio signal input

14. Y signal input

15. Pb signal input

16. Pr signal input

17. HDMI (High Definition Multimedia Interface) signal output

18. HDMI (High Definition Multimedia Interface) signal input

19. Mounting socket (bottom)

20. Battery slot

21. DC power input

22. Battery power on/off switch

23. Speaker

24. Mounting socket (right side)

There

are 3

bracket

jacks in the

Lift、right

and bottom of the device, as

shown“

”

。

DV BATTERY MOUNT PLATE:

Standard

mounts

process

：

Following three types of battery plates are suitable for this device, user can

choose two of the three (See the pictures below).

DV Battery Mount Plate:

Model DU21 for

battery

of Panasonic

DV:

NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with Panasonic

battery DU06/VBD140/SANYO DZhs301sw/Hitachi

DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.

Model QM91D for

battery

of SONY

DV:

DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV116/D

CR-DVD/PS105K/300K/10P/1E series.

Model F970 for

battery

of SONY

DV:

DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,

GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,

HVR-V1C, FX7E F330.

a – Lill

iput.co

m.ru

NAME

F

UNCTION

Brightness Adjust the level of brightness

Contrast Adjust the level of contrast
Saturation Adjust the level of saturation
Sharpness Adjust the sharpness of picture
Tint Adjust the tint of image
Volume Adjust the volume
Color mode

Choose the color temperature. Options:

User, 6500ºK, 7500 ºK, or 9300 ºK.

Red
Green
Blue

Note: Only available under “User” mode to
meet the color value you need.

SETTING

MEN

U

Before setting the functions, please make

sure

the device is connected

corr

ect

ly.

When power on, press BRI/M/SEL knob on the device, function menus will pop-

up on the screen.

Rotate BRI/M/SEL knob to select the options displayed on the screen, than rotate

SAT/ADJ knob to confirm and adjust option value.

After confirm the option value, then press BRI/M/SEL knob to return to
the previous, and press the BRI/M/SEL knob again to exit the menu settings.

MAIN MENU:

PICTURE MENU

:

K

EY CON

F

IGUR

E:

4 user-definable function buttons: F1, F2, F3 and F4 functions can be customized as:

mark, underscan, color mode, ratio, camera, peaking, false color, exposure and

histogram.

Knobs 1-2 can be set to alter the brightness, contrast, saturation, sharpness, tint,

volume, red, green, and blue for the shortcut keys.

Knob 1 defaults as Brightness function.

Knob 2 defaults as Volume function. .

SOURCE MENU

Disable or Enable the following input sources:

VIDEO、YPbPr、HDMI.

MISC MENU

Blue mode:

blue mode can be set on/off.

Reset:

confirm the recovery into factory mode.

Language:

English/Chinese switch.

Peaking:

Mono/Color

AC

CE

SSORIES:

Standard

acc

esso

ries

1. Sun shade cover 1 piece

2. Battery plate (DC21/QM91D/F970/LP-E6) 2 piece (choose 2 out of 4)

3. Manual 1 copy

4. Shoe mount (for camera only) 1 piece

5. DC adapter 1 piece

Optional

acc

esso

ries

1. HDMI to mini HDMI cable 1 piece

2. Li-ion battery 1 piece

P

AR

AME

TE

RS

:

Panel Size

5’’ TFT LCD

Resolution

800×480, support 1920×1

080

Contr

ast

600:1

Viewing Angle

130°/ 150°

(H/V)

Input Voltage

DC

12V

Support model

PAL，

NTSC，480

p/i、720p、576i/p、1080（i

50/60）

、

1080p(50/60)

(480i&576i are invalid

under YPbPr)

Input

Signal HDMI, YPbPr, AV

Batter

y

F970\DU21\QM91D

Curr

ent

450mA

Si

ze:(LWD)

151mm*

116mm*39.5mm

151mm*

116mm*98.1mm (with co

ver)

Weight

316g / 386g (with cove

r)

TROUBLE S

HOOTING

1. Only black-and-white display:

Check whether the color saturation is properly setup.

2. Power on but no pictures:

Check whether the cables of Video, HDMI or YPbPr are correctly connected.

Please use the standard power adapter coming with the product package.

Improper power input may cause the device.

3. Wrong or abnormal colors:

Check whether the cables are correctly and properly connected. Broken or loose

pins of the cables may cause a bad connection.

Note: due to constant

effort

to improve

products

and

product features,

specifications may change without

notice.