Page 1
COLOR TFT LCD
MONITOR
User Manual
Page 2
YP-01140228
IMPORTANT SAFETY INSTRUCTIONS:
Please read manual before using this product.
Please keep manual for future reference.
Please read the cautions to prevent possible danger and loss of property
Please enjoy the benefits of convenience, safety, and space-saving from this
TFT LCD monitor in different ways.
PRODUCTS:
This product employs integrate circuits, low power consumption, and no
radiation emission. It has fashion designed appearance and good portability.
HDMI & YPbPr Input, to connect with Full HD Video Camera.
LCD 16:9 Aspect Ratio, max 1920×1080 pixels.
With sun shade to see clearly under sunshine.
DC 6-24V wide range voltage.
Shooting view mark, RGB monochromatic display, 16:9/4:3 aspect ratio
switch, underscan/overscan switch, HDMI & Video output.
CAUTIONS：
1. Please do not place the display screen toward the ground.
2. Please avoid heavy impact or drop onto the ground.
3. Please do NOT use chemical solutions to clean this product. Please wipe with
a clean soft cloth to maintain the brightness of the surface.
4. Please do not block any vent hole.
5. Please follow the instructions and trouble-shootings to adjust the product.
Other improper adjustment may result in damage. Any further adjustment
must be performed or conducted by a qualified technician.
6. Please unplug the power and remove the battery if long-term no-use, or
thunder weather.
Table of Contents
PRODUCT DESCRIPTION -----------------------DV BATTERY MOUNT PLATE -----------------SETTING MENU --------------------------------------
ACCESSORIES --------------------------------------PARAMETER -----------------------------------------
TROUBLESHOOTING ------------------------------
Page 3
PRODUCT DESCRIPTION
1. EAR: Earphone jack
2. POWER: ON/OFF ；switch concurrence Battery indicator light (green
while working；red while standby)
3. VIDEO: Indicator lights up when signal switch to video state.
4. YPbPr: Indicator lights up when signal switch to YPbPr state.
5. HDMI: Indicator lights up when signal switch to HDMI state.
6. F1、F2、F3、F4：user-definable buttons.(definable function shortcuts:
mark、underscan、color mode、aspect ratio、5D camera mode.)
Default:
F1 mark: set the screen display range.
F2 underscan: image of the overscan/underscan switch.
F3 color mode: user-definable、6500ºK、7500 ºK、9300 ºK、red、
green & blue.
F4 aspect ratio: switch between 4:3 and 16:9.
7. Knob BRI/M/SEL function: Press the knob to access the menu function,
pressing the knob in the menu to return to the previous page or exit the
menu. Rotate knob to select an option. (Default: Brightness function,
turn the knob to adjust the brightness directly.)
8. Knob VOL/ADJ function: Rotary knob to confirm the selection and
adjust options parameter values. (Default: Sound function, turn the knob
to adjust the volume)
Page 4
9. Sun shade
10. Mounting socket (left side)
11. Video signal output
12. Video signal input
13. Audio signal input
14. Y signal input
15. Pb signal input
16. Pr signal input
17. HDMI (High Definition Multimedia Interface) signal output
18. HDMI (High Definition Multimedia Interface) signal input
19. Mounting socket (bottom)
20. Battery slot
21. DC power input
22. Battery power on/off switch
23. Speaker
24. Mounting socket (right side)
Page 5
DV BATTERY MOUNT PLATE:
Standard mounts process：
The included three types of battery plate are suitable for this device, user
can choose two of the three (See the pictures below).
MODEL: F-970 MODEL: QM91D MODEL: DU21 MODEL: LP-E6
DV Battery Mount Plate:
DV Battery Mount Plate Specification:
Model DU21 for battery of Panasonic DV:
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with
Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
Model QM91D for battery of SONY DV:
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV
116/DCR-DVD/PS105K/300K/10P/1E series.
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.
Model LP-E6 for battery of Canon DSLR:
5D Mark II/5D Mark III/EOS7D/EOS60D;
Page 6
NAME
FUNCTION
Brightness
Adjust the level of brightness
Contrast
Adjust the level of contrast
Saturation
Adjust the level of saturation
Sharpness
Adjust the sharpness of picture
Tint
Adjust the tint of image
Volume
Adjust the volume
Red
Note: Only can available under “User”
mode to meet the color value you need.
Green
Blue
Color mode
Choose the color temperature. Options:
User, 6500ºK, 7500 ºK, or 9300 ºK.
SETTING MENU
Before setting the functions, please make sure the device is connected correctly.
When power on, press menu on BRI/M/SEL knob of the device, the menu
setting function will display on the screen.
Use BRI/M/SEL knob to select the options displayed on the screen, than
rotate SAT/ADJ knob to confirm the value of options and tuning options.
Confirm the option value and press BRI/M/SEL knob to return to the
previous, than press the BRI/M/SEL knob to exit the menu settings.
MAIN MENU：
PICTURE MENU:
Page 7
KEY CONFIGURE
SOURCE MENU
Key configure: F1、F2、F3 & F4 can be
set as camera, mark, underscan, color mode
and ratio for the shortcut keys. 5D camera
mode can be set under HDMI function.
Knob 1 defaults as brightness function.
Knob 2 defaults as saturation function.
Turned on or off according to
individual needs VIDEO、YPbPr、HDMI.
MISC MENU
Blue mode: blue mode can be set on/off.
Reset: confirm the recovery into products
factory parameters.
Language: English/Chinese switch.
Page 8
ACCESSORIES:
Standard accessories
1. Sun shade cover 1 piece
2. Battery plate (DC21/QM91D/F970/LP-E6) 2 piece (choose 2 out of 4)
3. Manual 1 copy
4. DC adapter 1 piece
Optional accessories
1. HDMI to mini HDMI cable 1 piece
2. Shoe mount (for camera only) 1 piece
3. Li-ion battery 1 piece
Page 9
PARAMETERS:
Screen Resolution
800×480,up to 1920×1080
contrast
600: 1
Viewing Angle
150°/130°(H/V)
Input Signal
DC 12V
HDMI/YPbPr Mode
PAL，NTSC， 480p/i、 720p、576i/p、1080i（ 50/60）、
1080p(50/60)
Input Signal
HDMI、YPbPr、AV
Battery Type
F970\DU21\QM91D
Input Resistance
75Ω
Current
450mA
Audio Output
≥250mW
Size: (L × W × D)
151×116×39.5mm
151×116×98.1mm(with sun shade)
Weight
316g
386g（ with sun shade ）
TROUBLE SHOOTING
1. Only black-and-white display:
Check whether the color saturation is properly setup.
2. Power on but no pictures:
Check whether the cables of Video, HDMI or YPbPr are correctly connected.
Please use the standard power adapter coming with the product package.
Improper power input may cause the device.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected. Broken or loose
pins of the cables may cause a bad connection.
Note: due to constant effort to improve products and product features,
specifications may change without notice.
Loading...