Lightolier MJ6 User Manual
MJ6 Exit Signs MJ6
Page 1 of 1 Chicago LED Exit Signs
Energy saving LED AC-only and emergency exit models meet City of Chicago requirements. Rugged steel signs for wall, ceiling or end mount applications.
Standard Exit Combination Model (DEH option)
A B C D E
12.75” 9.5” 14.5” 2.5” 26.25”
32.4cm 24.1cm 36.8cm 6.4cm 66.7cm
How to Specify:
MJ6
SERIES MODE OF # OF LETTER EXIT FACE
OPER ATION FACES COLOR DESIGNATOR
MJ6 = Chicago Exit
Features
1. Illumination: Exit face illumination is provided by a special high intensity
indirect white LED lighting strips. Letter brightness and illumination uniformity
exceed UL requirements. MJ6E-DEH combination models with side mounted
lighting heads are provided with 6 volt, 12 watt halogen bi-pin lamps.
2. Housing: MJ6 Series exits are constructed of heavy duty steel finished
in white baked-on powder paint providing scratch and corrosion resistance.
Exit face features 6” letters with 3/4” stroke on translucent glass panels and
Full length directional arrows to meet City of Chicago visibility requirements.
Mounting canopy is standard.
3. Electronics: 120/277 VAC dual voltage input with surge-protected,
solid-state circuitr y. Fully automatic, temperature compensating, variable rate
float charging system is complete with low voltage disconnect, AC lockout,
brownout protection, AC indicator lamp and test switch.
4. Batter y: Maintenance-free, sealed, lead calcium batter y has an
estimated service life of 5 years, and an operating temperature range of 65°F
(19°C) to 85°F (30°C).
5. Input Power Requirements: AC Only: 9.6W (120 VAC), 9.2W (277 VAC);
Emergency Operation: 10.6W (120 VAC), 10.2W (277 VAC)
6. Warranty: Unit: 3-years full coverage against defects in materials and
workmanship from date of shipment; Battery: 3 years full warranty plus an
additional 7 years of pro-rata coverage
A = AC Only Exit
E = Emergenc y
Opera tion E xit
1 = Single face
2 = Double face
RW
RW = Red on White
Single Face Models
3 = EXIT (No Arrow)
6 = EXIT (Right Arrow)
9 = EXIT (Left Arrow)
12 = EXIT (Double Arrow)
2 = STAIRS (No Arrow)
5 = STAIRS (Right Arrow)
8 = STAIRS (Left Arrow)
11 = STAIRS (Double Arrow)
Double Face Models
18 = EXIT (No Arrow)
21 = EXIT (Right or
24 = EXIT (Double Arrow)
17 = STAIRS (No Arrow)
20 = STAIRS (Right or
Left Arrow)
23 = STAIRS (Double
Arrow)
Code Compliance
All models are UL Listed and meet NFPA 101 Life Safety Code, NEC, OSHA and City
of Chicago codes. Emergency models are UL924 Listed.
Options
DEH = Combination Model w/ Side Mounted Par 36 12W Halogen Heads
SW = Special Wording (consult factory)
SX = Self-Diagnostic Circuit (emergency models only)
IA = Audible Intermittent Alarm (emergency models only)
IV = Visual Intermittent Alarm (emergency models only)
FA = Fire Alarm Panel Interface
Accessories
MJSKW = 18” Stem Mounting Kit (white)
MJSKB = 18” Stem Mounting Kit (black)
MJPG9 = Wire Guard - Wall Mount (AC and emergency models)
MJPG10 = Wire Guard - Wall Mount (combination models)
Job Information Type:
Job Name:
Cat. No.:
Lightolier is a Philips group brand
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A0508
Loading...