Lightolier C3MRPA User Manual
Calculite
Spec. Sheet
1/2"
(13mm)
2" (59mm) Max.
Ceiling Thk.
1 1/4" Dia.
(32mm)
4" (102mm) Dia.
3 3/8" (86mm) Dia.
Flangeless Trim with
Plaster Ring Accessory
C3LV
9 1/2"
(242mm)
9"
(229mm)
1/2" (13mm)
C3AICLV
Vertical Adjustment
1" (25mm) to
2 3/4" (70mm)
11 2 6 4 7 3 85 10 9
1
5 1/2"
(140mm)
5"
(127mm)
Plus Ceiling
Thk.
5" (127mm)
12 5/8"
(321mm)
14 3/8"
(365mm)
9 5/8"
(245mm)
5" (127mm)
14 3/8"
(365mm)
10 1/8"
(257mm)
9" (229mm)
11 3/16"
(284mm)
22 3/8"
(568mm)
14 5/8"
(372mm)
®
Evolution Pinhole Adjustable Accent C3MRPA
Non-IC Frame:
C3LV
C3LVE1
C3LVE2
Non-IC AirSeal Frame:
C3ALV
C3ALVE1
C3ALVE2
IC AirSeal Frame:
C3AICLV
C3ALCLVE1
Ceiling Cutout: 3 1/2” (130mm) Dia.
For Complete Fixture Order: Trim Kit + Frame-In Kit. Each Sold Separately.
Trim Kit Frame-In Kit Lamp*
Trim Plate
Baffle Finish Painted White Satin Aluminum Flangeless
Matte White C3MRPA WH NA C3MRPA WHFT
Matte Black C3MRPA BK NA C3MRPA BKFT
Satin Aluminum NA C3MRPA SA C3MRPA SAFT
C3LV Non-IC Magnetic 120/277V 42W-65W MR16 (12V)
C3LVE1 Non-IC Electronic 120V 20W-65W MR16 (12V)
C3LVE2 Non-IC Electronic 277V 20W-65W MR16 (12V)
C3ALV Non-IC AirSeal® Magnetic 120/277V 42W-65W MR16 (12V)
C3ALVE1 Non-IC AirSeal® Electronic 120V 20W-65W MR16 (12V)
C3ALVE2 Non-IC AirSeal® Electronic 277V 20W-65W MR16 (12V)
C3AICLV IC AirSeal® Magnetic 120V 20W-50W MR16 (12V)
C3AICLVE1 IC AirSeal® Electronic 120V 20W-50W MR16 (12V)t
Note: Magnetic not recommended for residential or noise sensitive areas.
Features
1. Trim Kit Baf fle/Trim Plate : One piece machined aluminum, sharp details
for clean look. 1 1/4” dia. miniature baffle and built-in aperture shield
minimize and blocks view into fixture. Keyed to lamp support assembly
for true aiming of lamp to prevent incorrect installation of cone. Hinged,
and snaps on for easy tool-less installation. Trim plate in painted white or
anodized satin aluminum. Flangeless trim uses Plaster Trim Ring accessory.
Interchangeable with other 3" Evolution trims.
2. Trim Kit Vertical Adjus tment Mechanism: Die-cast aluminum. Built-in
aperture shield blocks view into fixture. Provides 0°- 35° ver tical tilt up
to 1" thick ceiling, less in thicker ceilings; lockable 25° maximum tilt in
ceilings 1.25" - 2" thick. Patented EZ-Aim Helical Drive System provides
fast and accurate hot aiming with Philips screwdriver.
3. Horizontal Adjustment Mechanism: Die-form steel ring, matte black
finish. Provides 362° horizontal stop, lockable with Philips screwdriver.
4. Lamp Support: Die-form aluminum with knurled surface for easy gripping
during relamping. Spring tension clips hold lamp and lens and allow fast
snap-in, snap-out relamping. Matte black finish. Accepts one 2" dia.
accessory.
5. Cover Glass: High temperature, sof t focus lens.
6. Thick Ceiling Ready Brackets: Die-form steel, matte black finish.
Adjust trim kit vertically to accommodate up to 2" thick ceiling, lockable.
7. Lampholder: Porcelain bi-pin socket. Pre-wired with No.18 AWG
Teflon leads.
8. Frame Vertical Adjustment Mechanism (C3LV): Accommodates
mounting to virtually any ceiling system using pre-installed mounting
bars, or 1/2" EMT tubing (by others). Single locking features secures all
adjustments. Alignment holes and markings allow fixture to be pre-set prior
to installation. Final adjustment can be made from below inside fixture.
9. Mounting Bars (C3LV): Galvanized steel, 0.048"; pre-installed
telescoping bars ex tend from 20" to 30" long and lock securely into
position. Built-in locking tabs provide positive attachment to common Tbar systems. Self-centering feature simplified installation in 24"O.C. grid
systems. Attaches to steel or wood joists without accessories.
10. Transformer: Replaceable from below. Magnetic: 120V/277V 60 Hz. dual-
voltage, core & coil. Note: Magnetic not recommended for residential or
noise sensitive areas. Electronic: 120V or 277V 50/60 Hz., regulated lamp
voltage, HPF, EMI and circuit protections, thermal auto-reset, quiet
operation.
11. Frame-In Kit: See Frame-In Kit specification sheets for more information.
Non-IC and Non-IC AirSeal® - Insulation must be kept 3" away from any
parts of the luminaire and must not be placed above luminaire in a manner
which will entrap heat.
IC AirSeal® - Luminaire may be in direct contact with thermal insulation.
Labels
U.L. (Suitable For Damp Locations), I.B.E.W.; U.S. & Foreign Patents Pending
* Lamp wattage restriction for Non-IC: 65W for up to 1" thick ceiling, 50W
for ceiling thickness greater than 1" (up to 2").
Options and Accessories
2" dia. Color Filters/Specialt y filters: See ADF2/AF2 specification sheets
2" dia. Louver: AL2HC
Plaster Trim Ring (use with flangeless trim): CA3FMR
Chicago Plenum: Consult Factory
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • E1107
Calculite
Spec. Sheet
®
Evolution Pinhole Adjustable Accent C3MRPA
(FC) is initial footcandles at center of
beam. Beam length (L) and beam width
(W) are to where the candlepower is
reduced to 50% of the center beam
candlepower. (C) is the distance to the
center of the beam. Footcandles are
based on photometry with luminaire,
with lamp aimed at 30° from vertical.
CANDLEPOWER DISTRIBUTION 37W MR16 (12V) IR - 10° Spot
ANGLE WALL
0 92
5 113
10 150
15 465
1000
2000
3000
4000
CANDLEPOWER DISTRIBUTION 50W MR16 (12V) - 10° Spot
1250
2500
3750
5000
60°
30°
60°
30°
20 1397
25 2873
30 3869
35 2549
40 796
45 150
50 40
55 12
60 3
65 0
70 0
75 0
80 0
85 0
90 0
ANGLE WALL
0 124
5 152
10 202
15 624
20 1872
25 3849
30 5183
35 3414
40 1066
45 202
50 55
55 17
60 5
65 0
70 0
75 0
80 0
85 0
90 0
AIMED 30° TOWARD WALL
REFLECTOR TRIM: C3MRPABK
SYLVANIA HALOGEN LAMP
120V ELECTRONIC TRANSFORMER
LUMEN RATING = 840 LMS
CBCP= 3869 cd
BEAM ANGLE = 15°
CERTIFIED TEST REPORT NO. 2740FR
DATE: Sep 24, 2004
**TEST-LITE**
AIMED 30° TOWARD WALL
REFLECTOR TRIM: C3MRPABK
SYLVANIA HALOGEN LAMP
120V ELECTRONIC TRANSFORMER
LUMEN RATING = 1125 LMS
CBCP= 5183 cd
BEAM ANGLE = 15°
CERTIFIED TEST REPORT NO. 2718FR
DATE: Sep 2, 2004
**TEST-LITE**
30° Aiming Angle
Horizontal Surface
D C FC L W
6' 3.5' 70 2.1' 1.8'
8' 4.6' 39 2.8' 2.4'
10' 5.8' 25 3.5' 3.0'
12' 6.9' 17 4.2' 3.6'
15' 8.7' 11 5.3' 4.6'
30° Aiming Angle
Horizontal Surface
D C FC L W
6' 3.5' 94 2.1' 1.8'
8' 4.6' 53 2.8' 2.4'
10' 5.8' 34 3.5' 3.0'
12' 6.9' 23 4.2' 3.6'
15' 8.7' 15 5.3' 4.6'
30° Aiming Angle
Vertical Surface
D C FC L W
2' 3.5' 146 2.2' 1.1'
3' 5.2' 65 3.3' 1.6'
4' 6.9' 37 4.4' 2.1'
6' 10.4' 16 6.7' 3.2'
8' 13.9' 9 8.9' 4.2'
30° Aiming Angle
Vertical Surface
D C FC L W
2' 3.5' 195 2.2' 1.1'
3' 5.2' 88 3.3' 1.6'
4' 6.9' 49 4.4' 2.1'
6' 10.4' 22 6.7' 3.2'
8' 13.9' 12 8.9' 4.2'
CANDLEPOWER DISTRIBUTION 50W MR16 (12V) - 25° Narrow Flood
ANGLE WALL
0 73
5 154
10 339
15 583
20 915
25 1386
400
800
1200
1600
60°
30°
30 1553
35 1399
40 1069
45 665
50 336
55 160
60 58
65 6
70 0
75 0
80 0
85 0
90 0
AIMED 30° TOWARD WALL
REFLECTOR TRIM: C3MRPABK
SYLVANIA HALOGEN LAMP
120V ELECTRONIC TRANSFORMER
LUMEN RATING = 800 LMS
CBCP= 1553 cd
BEAM ANGLE = 26°
CERTIFIED TEST REPORT NO. 2719FR
DATE: Oct 27, 2004
**TEST-LITE**
30° Aiming Angle
Horizontal Surface
D C FC L W
6' 3.5' 29 3.8' 3.2'
8' 4.6' 17 5.0' 4.3'
10' 5.8' 11 6.3' 5.3'
12' 6.9' 7 7.5' 6.4'
15' 8.7' 5 9.4' 8.0'
30° Aiming Angle
Vertical Surface
D C FC L W
2' 3.5' 78 4.4' 1.8'
3' 5.2' 35 6.6' 2.8'
4' 6.9' 20 8.8' 3.7'
6' 10.4' 9 13.2' 5.5'
8' 13.9' 5 17.6' 7.4'
Job Information Type:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • E1107
Loading...