Lightolier C3 User Manual
C3 Series Emergency Power Module C3
Page 1 of 2 12 Volt 50 and 75 Watts for Support of Outdoor Emergency Luminaires
The C3 Series is designed to support 12 VDC outdoor or indoor emergency luminaires located within close proximity of an emergency exit. The C3 Series emergency
power module offers an inconspicuous alternative to wall-mounted emergency products used to support remote emergency luminaires.
5.63”
(14.3 cm)
5.75”
(14.6 cm)
9.5”
(24.1 cm)
How to Specify:
C3
SERIES DC VOLTAGE OUTPUT BATTERY TRIM COV ER
WATTAGE FINISH
C3 = C3 Series Power
Module
2
2 = 12 volt
50 = 50 Watts
75 = 75 Watts
Features
1. Illumination: The C3 Series is a suggested emergency power source for
the LP Series interior/exterior low level LED luminaire, the LLEF Series MR16
exterior wall/soffit remote, and the LLRE Series recessed MR16 exterior
remote. See back page for more information on these products. In addition,
any 12 VDC remote emergency luminaire can be powered by the C3 power
module.
2. Housing: Rough-in enclosure fabricated from 20 gauge die-formed
galvanized steel. Trim plate fabricated from 12 gauge steel and is painted
with a matte white powder coat finish, or optional matte black finish.
3. Electronics: Automatic voltage regulated charging system. 2-state charger
eliminates the need for periodic battery exercising. Pre-wired plug-in
receptacle is provided within the enclosure for routing 12 VDC emergency
power to remote emergency luminaires.
4. Battery: Maintenance-free, sealed lead calcium battery has an estimated
service life of 5 years, and an operating temperature range of 65°F (19°C)
to 85°F (30°C). Damp location unit has an operating temperature range of
50°F (10°C) to 104°F (40°C). The C3250 power module uses (2) 100 -1-136
batteries, and supplies 50 watts at 12 VDC for 90 minutes. The C3275 uses
(2) 100-1-188 bat teries and supplies 75 wat ts at 12 VDC for 90 minutes.
5. Input Power Requirements: C3250: 120 VAC: 0.22 amps; 277 VAC:
0.11amps; C3275: 120 VAC: 0.21 amps; 277 VAC: 0.11 amps
L
L = Sealed Lead
Calcium
W = White
B = Black
Code Compliance
UL 924 listed. UL Damp Location Listing optional on 50 watt modules.
Options
DL = UL Damp Location Listing
Available on 50 watt unit only.
Accessories
BHK1 = Bar Hanger Kit for Mechanical Ceilings
Job Information Type:
Job Name:
Cat. No.:
4.5”
(11.4 cm)
Lightolier is a Philips group brand
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • C0308
C3 Series Emergency Power Module C3
Page 2 of 2 12 Volt 50 and 75 Watts for Support of Outdoor Emergency Luminaires
Recommended Product Selection to be used with the C3 Series
4.69”
(11.9 cm)
1.50”
(3.8 cm)
1.63”
(4.14 cm)
3.25”
(8.25 cm)
Model No. LP1SWH
Model No. LLREBK
Additional LP Series Luminaire Selections (White LED Illumination)
LP1SWH = White, 12V
LP1SBK = Black, 12V
LP1SIV = Ivory, 12V
*Maximum of (8) luminaires on high setting,
can be operated by the C3250 Series.
*Maximum of (13) luminaires on high setting
can be operated by the C3275 Series
*Consult factory for custom colors
Additional LLRE Luminaire Selections (MR16 Illumination)
LLREBK = Black
LLREBZ = Bronze
*Maximum of 75 watts of connected luminaires
can be operated by the C3 Series
*Lamps sold separately
4.50”
(11.4 cm)
5.38”
(13.67 cm)
2.75”
(6.99 cm)
MR 16 Lamp Selections
L12MR20FL = 12 volt, 20 watt, 15° Beam Spread
L12MR20WFL = 12 volt, 20 watt, 40° Beam Spread
L12MR35FL = 12 volt, 35 watt, 25° Beam Spread
L12MR35WFL = 12 volt, 35 watt, 40° Beam Spread
1.8”
(4.57 cm)
L12MR50FL = 12 volt, 50 watt, 25° Beam Spread
L12MR50WFL = 12 volt, 50 watt, 40° Beam Spread
MR16 Remote Head with Mounting Plate (LLEF)
• Constructed of durable die cast aluminum
• Available in black or bronze
• 12 Volt, 20, 35 or 50 Watt MR16 lamps available
• Single or double mounting plates available
LLEF
SERIES # OF HEADS MOUNTING PL ATE FINISH OPT IONS
LLEF = Indoor/Outdoor
Remote Head
1 = Single Remote
Head
2 = Double Remote
Head
Single & Double Remote Head with Round Mounting Plate
4.5”
(11.43 cm)
R = 4" Round
S = Rectangular Single Gang
7.8”
(19.81 cm)
6.5”
(16.51 cm)
BK = Black
BZ = Bronze
Blank = No Lamps Installed
20FL = 12V, 20W, 15' Beam Spread
20WF = 12V, 20W, 40' Beam Spread
35FL = 12V, 35W, 25' Beam Spread
35WF = 12V, 35W, 40' Beam Spread
50FL = 12V, 50W, 25' Beam Spread
50WF = 12V, 50W, 40' Beam Spread
Single & Double Remote Head w/ Rect. Mounting Plate
2.9”
(7.36 cm)
4.6”
(11.68 cm)
6.2”
(15.75 cm)
2.0”
(5.08 cm)
Glass Cover
Accessories for Use with LLEF
(Ordered Separately)
LORBBK = Outdoor 4" Round Surface Mount Junction Box, Black
LORBBZ = Outdoor 4" Round Surface Mount Junction Box, Bronze
LOSBBK = Outdoor Single Gang, Surface/Recessed 2 3/4" x 4 1/2"
Junction Box, Black
LOSBBZ = Outdoor Single Gang, Surface/Recessed 2 3/4" x 4 1/2"
Junction Box, Bronze
LORBBK(BZ)
4.1”
(10.41 cm)
LOSBBK(BZ)
2.8”
(7.11 cm)
12.3”
(31.24 cm)
7.6”
(19.3 cm)
4.5”
(11.43 cm)
1.6”
(4.06 cm)
2.1”
(5.33 cm)
Warranty
Electronics: 3 years
Battery: 1 year full, 4 years pro-rata
Lightolier is a Philips group brand
*Refer to ordering information for unit capacity. Do not over-rate.
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • C0308
Loading...