Lightolier C2X21LEDWW User Manual

Calculite

9 1/4" (235mm)

25 3/4" (654mm)

9 5/8"

(245mm)

12 1/2" (318mm)

3 5/8"

(93mm)

12 1/2" (318mm)

22 5/8" (575mm)

3" (76mm)

2 7/8" (73mm) Max.

11

1

6

4

10

53

12

8

14

2

137

9

1 1/8" (29 mm) Min.

3 1/2" (89mm) Max.

21 1/2" (546mm)

®

ColorWash C2X21LEDWW

Page 1 of 2 2 1/2" X 21 1/2" Aperture, LED Color-Changing Adjustable Wall Washer

Ordering Information

Solid State Lighting Unit Finish Light Source Frame-In Kit Input Voltage

C2X21LEDWWWH

C2 X21LEDW WBK

Matte White

Matte Black For 277V, use Stepdown Transformer Cat. No. 7997

Features

1. Heat Sink Housing: Extruded aluminum, design thermally optimized to

reduce LED junction temperature to maintain light output, color and life.
Matte white or black flange.

2. LED Array: Series of 48 high-power red, green, blue and amber (RGBA)

LEDs generate millions of colors and high quality white light at variable
color temperatures. Static colors and dynamic effects are programmable
by DMX controls. Average expected life, under normal operating conditions
is 50,0 00 hours with lumen maintenance of 70% of original light output.
Factory calibrated integral color sensor and self-adjusting feedback soft ware
guarantee color consistency over life.

3. Adjustable Reflector Housing: Molded high temperature polymer, matte

white or black finish. Adjusts from 0° - 45° vertically to accommodate various
ceiling heights and luminaire to wall mounting distance to ensure smooth,
even wall washing from ceiling line to floor; built-in vertical angle indicators
aid in aligning multiple luminaires; lockable.

4. MicroBlend optics: Internal collective mixing technology ensures smooth

washing and color uniformity and eliminates undesirable color fringing.

5. Aper ture Lens: Tempered glass, fine texture provides additional mixing at

the aperture and minimizes the appearance of the individual RGBA sources.

6. Torsiontite Springs: Secure solid state lighting module tight against ceiling

surface without sagging. Accommodates ceilings from ½” to 2” thick.

7. Power Supply Unit /Slave Control Drive Module: PSU: 120VAC 50/60

Hz., Class 2, high power factor, FCC Class B approved, short circuit protection.
SCD: low voltage DC, provides power and data to control LED array with a
maximum of 8 LED channels. Electronics are enclosed in a black extruded
aluminum housing providing optimal thermal dissipation for reliable operation
and long life. Module is replaceable from below the ceiling.

8. DMX Connector s: Two RJ45 jacks mounted at one end of PSU/SCD

module provide DMX512-In and DMX512-Out connections (see page 2). Uses
standard shielded, plenum rated (required for plenum ceilings), CAT5 round, 8
conductor, twisted pair, network cables (not supplied)

Lightolier is a Philips group brand

Ceiling Cutouts: 3 3/8" x 22"

RGBA LED Array

C2 X21CCLEDWW 1

120

Features (continued)

9. Flexible Metal Conduit/Quick Connector: Quick connector for easy field

data connection.

10. Mounting Frame: 0.048" thk., galv. steel.

11. Mounting Brackets: 0.060" galv. steel, adjust from inside of fixture. Use

3/4" or 1 1/2" lathing channel, 1/2" EMT, or optional mounting bars.

12. T-bar Mounting Clips: Provide quick installation to 1 1/2" to 3" high 2 ft. on

center T-Bar grid ceiling systems without use of tool.

13. Junction Box: UL and cUL Listed for through branch circuit wiring with max.

of (8) No. 12 AWG, 90 ºC supply conductors.

14. Thermal Protector: Meets (NEC) UL and (CEC) CSA requirements. Insulation

must be kept 3" away from fixture sides and wiring compartments and must
not be placed above fixture in a manner which will entrap heat.

Electrical

120V: Input Watts: Must be circuited for 75W Max.

Labels

cULus Listed for dr y locations. I.B.E.W.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):
Notes:

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

www.lightolier.com © 2008 Philips Group • A0808

Calculite

3'

4'

3'

30'29' 30'

LIGHTOLIER

LYTEMODEÆ DMX

Control System

Strand Lighting

Accent DMX

DMX512 Out

DMX512 In

DMX512 Out
To Next Luminaire

or

RJ45 DMX Terminator
(Required to terminate
the last luminaire in the
same data line)

Entertainment

Technology

DMX Control

OPTIONS
DMX512
Systems*

RJ45 jacks

Color-Changing Adjustable Wall Washer

Color-Changing Adjustable Wall Washer

Other Standard

DMX512

Interface Control

120VAC 50/60HZ. Power Input

120VAC 50/60HZ. Power Input

DMX512 In

RJ45 jacks

CAT5 (8) wires round cable with RJ45 plugs (by others) CAT5 (8) wires round cable with RJ45 plugs (by others)

Lightolier Lytemode

DMX Master Station

DMX512 Out

DMX512 In

Input Power
120 - 240VAC 50/60HZ.

120VAC 60 HZ.
Power Input

DMX512 Out

Shielded CAT5 9 Pin Connector Wiring

ILS Network (optional)

Mini Master

(order seperately)

XLR-5(Femal port)

MARQUEEÆ PC DMX INTERFACE

Stand-Alone
Accent DMX

Connected Console
or Computer to create scenes

* All systems shown are stand-alone. For
additional information and other DMX
systems, please visit http://www.philipsna.com/"
for link to each manufacturer web site.

USB Port to PC

Horizon 512 Channel DMX Interface or others

DMX Interface XLR-5 Port (Female)

Receptacle (By Others)

DMX512 Cable

DMX512 Cable

®

ColorWash C2X21LEDWW

Page 2 of 2 2 1/2" X 21 1/2" Aperture, LED Color-Changing Adjustable Wall Washer

Lighting Data (All data is based on 3000K color temperature and 45º tilt)

Example: With multiple units located

Color Temperature: 3000K

Max. Tilt: 45º

Repor t No: 22906

2' Fro m Wall - Single 2' Fro m Wall - 2' On Center 2' Fro m Wall - 3' On Center 2' Fro m Wall - 4' On Center

1 1 12 56 12 1 1 84 83 84 1 64 48 64 1 59 25 59
2 2 17 49 17 2 2 87 87 87 2 61 56 61 2 53 34 59
3 2 12 26 12 2 3 57 57 57 3 38 38 38 3 31 26 31

4 2 7 12 7 2 4 31 31 31 4 21 21 21 4 16 15 16
5 1 4 5 4 1 5 18 18 18 5 12 12 12 5 9 9 9

6 1 2 3 2 1 6 11 11 11 6 8 7 8 6 5 5 5
7 1 1 1 1 1 7 8 8 8 7 5 5 5 7 4 4 4

8 1 1 1 1 1 8 6 6 6 8 4 4 4 8 3 3 3
9 0 1 1 1 0 9 4 4 4 9 3 3 3 9 2 2 2

3' Fro m Wall - Single 3' Fro m Wall - 3' On Center 3' Fro m Wall - 4' On Center 3' Fro m Wall - 5' On Center 3' From W all - 6' On Center

1 2 10 25 10 2 1 34 32 34 1 28 20 28 1 27 13 27 1 26 8 25
2 3 13 27 13 3 2 41 41 41 2 33 28 33 2 30 19 30 2 28 13 28
3 3 13 23 13 3 3 40 40 40 3 30 29 30 3 26 21 26 3 25 15 25

4 3 10 15 10 3 4 31 31 31 4 23 23 23 4 19 18 19 4 17 13 17
5 3 7 9 7 3 5 22 22 22 5 16 16 16 5 13 13 13 5 11 10 11

6 2 4 5 4 2 6 15 15 15 6 11 11 11 6 9 9 9 6 7 7 7
7 2 3 3 3 2 7 10 10 10 7 7 7 7 7 6 6 6 7 5 5 5

8 1 2 2 2 1 8 7 7 7 8 5 5 5 8 4 4 4 8 3 3 3
9 1 1 1 1 1 9 5 5 5 9 4 4 4 9 3 3 3 9 3 3 3

3' from wall and spaced 4' on center, the
illumination on the wall 3' down from
ceiling will be 30 f.c. beneath units and
29 f.c. between units. Footcandle values
are averaged and rounded off and are
based on a minimum of five units.

DMX Network

Lightolier is a Philips group brand

Accessories

Addressable Interface Kit: Cat. No. CLEDAIK

Load addresses and select operating mode for
DMX protocol, load serial numbers and specific
lighting preset, update firmware to each LED
lighting unit

DMX Terminator: Cat. No. CLEDDMXTERM
Stepdown Transformer: Cat. No. 7997.

Supplies
120V fixture from a 277V 60Hz. branch circuit (20
amp. minimum). Can be used up to (4) fixtures (not
to exceed 300W maximum load).
Mounting Bars: 1950 - 18" Set of (2)

Job Information Type:

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

www.lightolier.com © 2008 Philips Group • A0808

1951 - 27" Set of (2)