Lytecaster
®
Recessed Downlighting 1124
Page 1 of 2 6 3/4" Aperture Cratere Dome Diffuser Reflector Trim
6 3/4"
1 1/4" Max.
2 3/4"
1124/1102P1
Standard Incandescent
8 1/8"
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
9 1/4"
6 3/4"
1124/1100
DEEP IC Series
Incandescent
Insulated Ceiling
1124/1103R
0
Non-IC
Remodeler Ring
Reflector Trim Frame-In Kit — See Individual Frame-In Kit Specification Sheets
1124
Doubled
Etched
Frame-In Kit Ceiling Type Lamping Height Frame-In Kit Installation Type Lamping Height
1102P1
1103R
1100IC
1100AICM
1100DICM
1100DAICM
1104ICX/N
1104IC/N
1104ICR
1104IC/N
1104ICR
Incandescent Fluorescent
Non-IC
Non-IC Remodeler
IC
AirSeal® IC
Deep IC
Deep AirSeal® IC
AirSeal® IC
AirSeal® IC
IC Remodeler
Non-IC
Non-IC Remodeler
100W A19 6 3/4"
6 3/4"
60W A19 7 5/16"
7 5/16"
9 1/4"
9 1/4"
7 1/4"
40W A19 7 1/4"
7 1/2"
75W A19 7 1/2"
7 1/2"
1101F18U Series
1101F2642U
Series
1104F13 Series
1104F18 Series
1104F26 Series
1100FTU Series
1100AICMFT
1101F18ICU/N
1101F2642ICU
1101F2642IUN
1101FDICMX1/N
1101FDICMX2/N
1910XFH1
1910XDH1
™
UniFrame
Non-IC
UniFrame™
Non-IC
IC
IC
IC
Non-IC
AirSeal®IC
Performance IC
Performance IC
Performance IC
Advance Mark10
Dimming 120v
Performance IC
Advance Mark10
Dimming 277v
Conversion Kit
Conversion Kit
7 1/2"
™
(1) Quad/Triple 18W (GX24q-2)
(1) Quad/Triple 26W (GX24q-3)
(1) Triple 32W (GX24q-3)
(1) Triple 42W (GX24q-3)
(1) Quad/Triple 13W (GX24q-1)
(1) Quad/Triple 18W (GX24q-2)
(1) Quad/Triple 26W (GX24q-3)
(1) Triple 26/32W (GX24q-3)
(1) Triple 26W (GX24q-3)
(1) Quad/Triple 18W (GX24q-2)
(1) Quad/Triple 26W (GX24q-3)
(1) Triple 32W (GX24q-3)
(1) Quad/Triple 26W (GX24q-3)
(1) Triple 32W (GX24q-3)
(1) Quad/Triple 26W (GX24q-3)
(1) Triple 32W (GX24q-3)
(1) Quad 13W (GX23-2)
(2) Quad 13W (GX23-2)
1124/1104IC/N
0
IC/Non-IC
Convertible
™
5 7/8"
5 7/8"
7 1/2"
7 1/2"
7 1/2"
6 3/4"
6 7/8"
7 1/4"
7 1/4"
7 1/4"
7 1/4"
6 3/4"
6 3/4"
Features
1. Reflector: Hydroformed aluminum, .040 minimum thickness; Anobrite®
(anodic-processed) semi-specular finish for permanent reflectivity.
2. Diffuser: Textured double etched glass; twist tight to reflector trim.
Neoprene (captive on flange of reflector) seals unit under pressure of twist
lock. Concealed wire-hinge supports glass enclosure for quick servicing.
3. Frame-In Kit: (1102P1 standard frame shown). Other frames listed above
and shown on the right. See Frame-In Kit specification sheets for more
details.
Meets NEC® requirements for Spas and Hot Tubs.
Options & Accessories
Retaining Clips: 1955 - For installing in existing ceiling.
Labels
UL (Suitable for Wet Locations - Covered Ceiling Only), I.B.E.W.
NEC® is a registered trademark of the National Fire Protection Association.
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • H1007
Lytecaster
®
Recessed Downlighting 1124
Page 2 of 2 6 3/4" Aperture Cratere Dome Diffuser Reflector Trim
To convert lighting data for a lower wattage incandescent lamp of the same type, multiply the footcandle (or candlepower) values by the ratio of the lumens of the two lamps.
The coefficients of utilization remain the same.
Job Information Type:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • H1007