Lightcomm Technology SPBTWT Users Manual

372*160mm(折叠后尺寸62x160mm),材质:80g书纸

V1

FINAL

FOR PRINT

NS-SPBTWT_18-0037_QSG_V1_EN.ai 1 4/25/2018 7:54:40 AM

QUICK SETUP GUIDE

Portable Bluetooth Speaker
with Walkie-Talkie

PACKAGE CONTENTS

• Speaker with walkie-talkie (2) • Carrying straps (2)

• )2( selbac BSU • Quick Setup Guide

FEATURES

• Wirelessly stream from any Bluetooth device

• True wir

• Rechargeable battery lasts up to 12 hours for music playback and 8 hours when using the

• Water-resistant body protects from rain and liquids (not water-proof, do not submerge)

• Speaker phone for hands-free calls

Walkie-talkie LED

Frequency knob

eless stereo (TWS) connects two speakers together to play left- and right-channel audio

separately

walkie-talkie

edis thgiR edis tfeL tnorF

Bluetooth/

Charging LED

P-OFF

Microphone/

speaker

Before using your new product, please read these instructions to prevent any damage.

Volume +/-

buttons

AUX in jack

Micro USB port

Antenna

PTT (Push-to-talk)
button

Call/Bluetooth button

Power button

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.

• Follow all instructions.

• Do not store the product in an extremely cold or warm environment.

• Never dismantle the product.

•• Never let children play with the product.

Do not expose the speaker’s battery to excessive heat such as sunshine, re or like.

Note: The battery in this speaker cannot be replaced by the user.

CHARGING YOUR SPEAKER

1 Lift the tab to open the rubber cover over the ports.
2 Connect a USB cable from your speaker to a computer or power adapter (not included). The

Notes:

• You can charge your speaker while playing audio or using the walkie-talkie.

Bluetooth/Charging LED

CHARGING LED FUNCTION

Orange Charging

P-OFF

USB cable

CONNECTING AN AUDIO DEVICE

Bluetooth
1 Press and hold (power) to turn on your speaker. The Bluetooth LED

blinks blue quickly and your speaker enters pairing mode.

2 Make sure that your Bluetooth device is within 33 ft. (10 m) of your

speaker.

3 On your Bluetooth device, turn on Bluetooth and select NS-SPBTWT from

the list of available devices. Your speaker pairs with your Blu
and the Bluetooth LED lights solid blue.

4 Use your Bluetooth device to control playback, making sure that its

volume is set to at least 50%.

5 To disconnect:

• Press and hold (Bluetooth/call) for three seconds.
OR

• Un-pair your Bluetooth device from your speaker.

etooth device

Bluetooth/Charging LED

P-OFF

Flat size (W×H): 14.65 × 6.3 in. (372 × 160 mm)
Final folded size: 2.4 × 6.3 in. (62 × 160 mm)

AUX IN
1 Connect a 3.5 mm audio cable (not included) from your speaker's AUX jack to your audio

device’s headphone/audio out jack. The Bluetooth/Charging LED blinks blue slowly while
connected to the cable.

2 Use your connected device to control playback, making sure that its volume is set to at least 50%.

CONNECTING YOUR SPEAKERS WITH TWS

True wireless stereo (TWS lets you connect your two included speakers together to play left- and
right-channel audio separately.

1 Press and hold (Bluetoo

other Bluetooth devices and enter pairing mode. The Bluetooth LEDs blink quickly.

2 Press (Bluetooth/call) twice on one speaker. The speaker says “true wireless pairing” and

pairs to the other speaker. Once paired, the speakers say “paired” and “left channel.” The
left-channel speaker’s Bluetooth LED blinks blue slowly and the right speaker’s Bluetooth LED is
solid blue.

3 Make sure that your
4 On your Bluetooth device, turn on Bluetooth and select NS-SPBTWT from the list of available

devices. When your Bluetooth device is paired, the left-channel speaker’s Bluetooth LED beeps
and continues to blink blue slowly.

Note: Only the left-channel speaker can be used for phone calls or AUX connections while using TWS.

5 Press (power). The speaker announces that it is either the left or right channel so you know

which side to place the speaker on.

BLUETOOTH LED

Blinks blue quickly

Lights solid blue

Blinks blue slowly

th/call) on both speakers for three seconds to disconnect from

Bluetooth device is within 33 ft. (10 m) of your speaker.

FUNCTION

Bluetooth pairing mode

Paired to a Bluetooth device or is the right speaker when paired with TWS

Connected to an AUX device or is the left speaker when paired with TWS

TAKING A PHONE CALL

The following functions are available when paired to a phone with Bluetooth:

• Reject an incoming call: Press and hold (Bluetooth/call)

• Answer an incoming call: Press (Bluetooth/call)

• Switch audio between your speaker and phone: Press and hold (Bluetooth/call)

• End current call: Press (Bluetooth/call)

Note: Only the left-channel speaker can be used for phone calls or AUX connections while using TWS.

NS-SPBTWT_18-0037_QSG_V1_EN.ai 2 4/25/2018 7:54:44 AMNS-SPBTWT_18-0037_QSG_V1_EN.ai 2 4/25/2018 7:54:44 AM

RECONNECTING TO A PAIRED DEVICE

When your speaker is not paired to a device, the Bluetooth LED blinks blue.

Your speaker loses the Bluetooth
connection if you...

Turn o your speaker.

Move the Bluetooth device out of range.

Turn o your Bluetooth device.

Turn o Bluetooth on your Bluetooth device.

Connect your Bluetooth device to another
Bluetooth device.

Note: The Bluetooth range (33 ft./10 m) may be reduced if the wireless signal has to pass through walls or other
obstructions.

To reconnect...

Turn on your speaker. Your speaker searches for the last connected Bluetooth device and reconnects.

Make sure that your Bluetooth device is within 33 feet (10 m) of your speaker.

Turn on your Bluetooth device, then make sure that Bluetooth is on.

Turn on Bluetooth on your Bluetooth device.

Disconnect your Bluetooth device from the other Bluetooth device, then set your device to pairing mode.
Select NS-SPBTWT on your Bluetooth device.

USING YOUR WALKIETALKIE

1 Turn the frequency knob to tune your walkie-talkie to the channel (1-8) that you want. The

walkie-talkie LED lights green when you receive a signal.

2 Make sure that the person you want to talk to is on the same frequency and within 1.2 mi. (2 km)

of you.

3 Press and hold the PTT (push-to-talk) button to speak, then release when you are nished.

The walkie-talkie LED lights red while you transmit.

Note: Speaker music will automatically pause/play when you press/release the PTT button.

4 To turn o the walkie-talkie, turn the frequency knob to P-OFF.

Walkie-talkie

LED

Turn to same
channel (1-8)

P-OFFP-OFF

WALKIETALKIE LED FUNCTION

Solid red Send signal

Solid green Receive signal

Blinks green On a phone call

RESETTING YOUR SPEAKER

• To clear your speaker’s list of paired devices, press and hold for eight seconds.
The speaker resets.

Note: Resetting may help if you have trouble pairing your speaker.

TROUBLESHOOTING

PROBLEM

No power

No sound or low volume

Cannot establish Bluetooth
connection

My Bluetooth device keeps
unpairing

“NS-SPBTWT” does not appear
on my Bluetooth device

Poor sound quality

Can’t transmit or receive

I hear interference

I am hearing other people’s
conversations

SOLUTION

• Make sure that your speaker’s battery is charged.

• Make sure that your speaker is turned on.

• Make sure that your Bluetooth device is turned on, Bluetooth is turned on, and NS-SPBTWT is selected.

• Turn up the volume on your speaker and Bluetooth device. Make sure that your Bluetooth device is not muted.

• Make sure that your speaker is not paired to another Bluetooth device.

• Make sure that your Bluetooth device is not paired to another Bluetooth device.

• Shorten the distance between your speaker and your Bluetooth device.

• Make sure that your speaker is in pairing mode. Press and hold the (call) button to reenter pairing mode.

• Shorten the distance between your speaker and your Bluetooth device.

• Turn your devices o, then on. Re-pair your speaker and your Bluetooth device.

• Make sure that your speaker is not paired to another Bluetooth device.

• Make sure that your speaker and Bluetooth device are both in pairing mode.

• Make sure that your Bluetooth device supports Bluetooth v4.0 and below.

• Make sure that your Bluetooth device is not connected to any other device.

• Make sure that you have selected NS-SPBTWT on your Bluetooth device.

• Disconnect any audio cables connected to your speaker’s AUX jack.

• Shorten the distance between your speaker and your Bluetooth device.

• If the battery on your Bluetooth device is low, recharge the battery.

• If the battery on your speaker is low, recharge the battery.

• Shorten the distance between your speaker and your Bluetooth device.

• Put your speaker into pairing mode, then refresh your list of Bluetooth devices. For more information, see the
documentation that came with your Bluetooth device.

• Move your speaker and Bluetooth device closer together.

• Try a dierent music source.

• Pair your speaker to a dierent mobile device.

• Try changing the volume on your music source.

• Make sure that both walkie-talkies are fully charged and turned on.

• Make sure that you are within 1.2 mi. (2 km) of the person you want to talk to. This range may be reduced
depending on the terrain or other interference in your area.

• Make sure that you and the person you want to talk to are on the same frequency.

Note: The channel numbers may be dierent across dierent radio brands. Check the channel/frequency table to make sure that

you’re tuned to the same frequency.

• The walkie-talkies may be too close together, try separating them farther.

• Make sure that both walkie-talkies are fully charged and turned on.

• Make sure that you are not touching the microphone or antenna.

• Change to a dierent channel/frequency that others are not using.

SPECIFICATIONS

• Dimensions (L × W × H): • Bluetooth range: 33 ft. (10 m)

2.7 × 5.5 × 1.6 in. (6.8 × 14 × 4.1 cm) • Run time: 12 hours (speaker); 8 hours (walkie-talkie)

• Battery size: 2,200 mAh • Charge time: 4.5 hours

• Wattage: 3W • Weight: .5 lbs. (.24 kg)

• USB cable length: 11.8 in. (30 cm) • Walkie-talkie range: 1.2 mi. (2 km)

LEGAL NOTICES

FCC

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

- Reorient the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modications not expressly approved by the party responsible for compliance could void your authority to
operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment. Such
modications could void the user’s authority to operate the equipment.

RSS
IC Statement

This device complies with Industry Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicable s aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suiv antes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accept er tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en comprom ettre le fonctionnement.

ONEYEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

1-877-467-4289 (U.S. and Canada)
01-800-926-3000 (Mexico)
www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its aliated companies. Distributed by Best Buy Purchasing, LLC. 7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved. Made in China

V1 ENGLISH 18-0037