Lift-Master 93LM User Manual

Owner's Manual

Model 93LM Code-Guard™ Multi-Function Remote Control

WARNING

Children operating or playing with a garage door opener can injure themselves or others. The garage door could close and cause serious injury or death. Do not allow children to operate the wall push button(s) or remote control(s).

A moving garage door could injure or kill someone under it. Activate the opener only when you can see the door clearly, it is free of obstructions, and is properly adjusted.

The 90 Series remote control (with yellow battery test light) works only with 530LM Code-Guard™ receivers having a yellow indicator light.

Programming instructions are described and illustrated below. The additional push buttons on the Multi-Function Remote Control can also activate other receivers.

PROGRAM THE RECEIVER TO ACCEPT

THE REMOTE CONTROL CODE

Select a remote control push button to operate the opener. The

large

button is recommended for use

with a garage door opener.

1. Press and

hold

the selected remote control push

button (Figure 1).

2. Then press and release the "SMART" button on the receiver panel (Figure 2). The indicator light will

flash once

. Release the remote control push

button.

Now the receiver will operate when the remote push button is pressed.

NOTE: If you release the remote control push button before the indicator light flashes, the receiver has not accepted the code.

To comply with FCC/IC rules, adjustment or modification of receiver and/or transmitter is prohibited except for replacing the battery. THERE ARE NO USER SERVICEABLE PARTS.

Figure 1

Model 93LM

Select a remote control

push button

Figure 2

Indicator Light

Smart

Button

To Erase All Transmitter Codes

• Press and hold the "SMART" button on the receiver

panel until the indicator light turns off (about 6 seconds). ALL

the codes the receiver has

RECEIVER

learned will be erased.

• To reprogram, repeat Steps 1 and 2 for each remote

control in use. Code programming instructions

are also located in the receiver manual.

FOR SERVICE DIAL OUR TOLL FREE NUMBER: 1-800-528-9131