Please read this important information before using your monitor.
Please remember that only a medical practitioner is qualified to interpret
☞
your blood pressure measurements. Use of this device should not replace
regular medical examinations.
Consult your physician if you have any doubt about your readings.
☞
Should a mechanical problem occur, contact LifeSource® at
1-888-726-9966.
Do not attempt to service, calibrate, or repair this monitor.
☞
Because your UA-853 monitor contains delicate, high-precision parts,
☞
avoid exposing it to extremes in temperature or humidity or to direct
sunlight, shock and dust. LifeSource® guarantees the accuracy of this
monitor only when it is stored and used within the temperature and
humidity ranges noted on page E-21.
Clean the monitor and cuff with a dry, soft cloth or a cloth dampened
☞
with water and a mild detergent. Never use alcohol, benzene, thinner or
other harsh chemicals to clean monitor or cuff.
Remove and replace batteries if monitor is not used for more than six
☞
months. Alkaline batteries recommended.
PRECAUTIONS
The UA-853 is designed to be used at home, by those who are eighteen (18)
years and older, to monitor blood pressure (systolic and diastolic) and pulse
rate.
Fast. Easy. Accurate.
Congratulations on purchasing a state-of-the-art LifeSource®
blood pressure monitor—one of the most technologically
advanced monitors available today. Designed for ease of use
and accuracy, this monitor will facilitate your daily blood
pressure regimen.
Physicians agree that daily self-monitoring of blood pressure
is an important step individuals can take to maintain
cardiovascular health and prevent the serious consequences
associated with undetected and untreated hypertension.
A&D Medical has been manufacturing high quality
healthcare products for ove 20 years. We are committed to
providing you and your family with monitoring devices that
provide the utmost in accuracy and convenience.
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
E-1
?
p-3
1932-1AIc UA787EXC¥06 illust¥03,12p
1932-1AIc UA787EXC¥06 illust¥03,12p
1932-1AIc UA787EXC¥06 illust¥03,12p
1932-1AIc UA787EXC¥06 illust¥03,12p
1932-1AIc UA787EXC¥06 illust¥03,12p
1932-1AIc UA787EXC¥06 illust¥03,12p
WHAT DISPLAY SYMBOLS MEAN
Display/
Symbol
Battery Full
Battery Low
PULSE DISPLAY ERROR
Condition/Cause
The symbol shown while measurement is in progress. It blinks while
detecting the pulse.
An irregular heartbeat or body
movement may have occurred.
Refer to page E-11 for more information on irregular heartbeats.
Previous measurement stored in
MEMORY.
The battery power indicator during
measurement.
The batteries are low when it
blinks.
Unstable blood pressure due to
excessive body movement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not fastened correctly.
There is an air leak in the cuff or
monitor.
The pulse is not detected correctly.
Cuff Inflation Meter
Pressure Rating Indicator™
The alarm is turned on.
Recommended
Action
Measurement is in progress,
remain as still as possible.
Take measurement again and
consult with your physician.
Replace all batteries with new
ones when the symbol blinks.
Alkaline batteries recommended.
Try the measurement again.
Remain very still during the
measurement.
Fasten the cuff correctly, and try
the measurement again.
Check for air leaks along the
tube and around the air socket.
Refasten the cuff and retake measurement.
Make sure tube is properly connected to cuff and monitor.
Try the measurement again.
Remain very still during the
measurement.
Measurement is in progress,
remain as still as possible.
Refer to the section “About
Pressure Rating Indicator” for
further explanation.
Press AM button once to turn
alarm off.
E-2
?
LifeSource Health Line (Toll-Free): 1-888-726-9966
MONITOR COMPONENTS
Arm Cuff
Air Hose
BACK
Air Connector Plug
AM Button
PM Button
Air Socket
Battery Compartment
Display
MEMORY Button
FRONT
START Button
(Orange illumination during the AM)
(Blue illumination during the PM)
Battery Cover
AC Adapter Jack
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
AC Adapter
E-3
HOW UA-853 WORKS
?
LifeSource® blood pressure monitors are easy to use, accurate and digitally
display full measurement readouts. Our technology is based on the
“oscillometric method” – a noninvasive blood pressure determination. The
term “oscillation” refers to any measure of vibrations caused by the arterial
pulse. Our monitor examines the pulsatile pressure generated by the arterial
wall as it expands and contracts against the cuff with each heartbeat.
The cuff is inflated until the artery is fully blocked. The inflation speed is
maximized and the pressure level is optimized by the device. The monitor
takes measurements while the cuff is both inflating and deflating. This results
in a faster measurement providing greater comfort to the user.
AM/PM TimeWise™ Technology
This monitor automatically stores each measurement as an AM or PM reading
in memory (note: clock must be properly programmed before initial use).
Healthcare providers agree that understanding your AM and PM readings can
assist in the proper diagnosis and management of your heart health through
lifestyle and/or medication modifications.
BEFORE YOU START
You must install 4 type AA (1.5 volt) batteries (alkaline batteries
recommended), or use the AC Adapter (see page E-14 for using the Monitor
with AC Adapter) and attach the cuff to the monitor before using it. To install
batteries (or replace them if the “Low Battery” symbol appears on display),
proceed as follows:
1. Remove battery compartment cover by gently
pushing down on arrow and sliding cover forward.
2. Put in bottom row of batteries first. Place the
batteries in compartment with positive (+) and
negative (–) terminals matching those indicated in
the compartment. Be sure batteries make contact
with compartment terminals.
3. Replace cover by sliding it into the compartment and gently pressing into
place.
NOTE: Rechargeable batteries will not work with this monitor.
E-4
?!
LifeSource Health Line (Toll-Free): 1-888-726-9966
Step 1
Step 2
Step 3
SELECTING THE CORRECT CUFF SIZE
USE SMALL CUFFUSE LARGE CUFFPROPER FIT RANGE
INDEX
Using the correct cuff size is important for an accurate reading. A cuff that is
too large will produce a reading that is lower than the correct blood pressure;
a cuff that is too small will produce a reading that is higher than the correct
blood pressure. With your arm hanging at the side of your body, measure the
circumference of your upper arm at the midpoint between the shoulder and
elbow.
ARM SIZE
RECOMMENDED CUFF
SIZE
REPLACEMENT CUFF MODEL #
9.4" - 14.2" (24 - 36cm)Medium CuffUA-280
14.2" - 17.7" (36-45cm)Large CuffUA-281
NOTE: The LifeSource small cuff is not compatible with the UA-853 monitor.
Cuff Size Indicator On The Cuff
Our cuff has an indicator which tells you whether you are using the correct
cuff size or not. Place the cuff on your arm (see Page E-6 to learn how to put
the cuff on correctly) and if the Index Mark points within the Proper
Fit Range, you are using the correct cuff size. If the Index points outside of the
Proper Fit Range, contact A&D Medical at 1-888-726-9966 (in Canada, call
Auto Control Medical at 1-800-461-0991) for more information on where to
obtain a cuff replacement.
NOTE: If the cuff size indicator falls on a borderline between two size categories,
pick either one and make sure to use the same cuff size for each measurement.
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
E-5
!
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.