AQ11
User Guide
+
SECTION 1
SPEAKER
ANATOMY
AQ10 + AQ11 ANATOMY
Power Button
Long press to turn on and o
Short press to check battery level
Lock Switch
Flip to lock and unlock all buttons
AQ10 + AQ11 ANATOMY
3.5 mm Auxiliary Audio Jack
Stream by wire
Power In
Recharge your speaker
USB Charge Out
Plug in and charge up your device
AQ10 + AQ11 ANATOMY
Pair
Connect to Bluetooth devices
Back
Return to the previous track
Play
Press to get the party started
Forward
Advance to the next track
Source
Switch between audio sources
Volume Down
Hush your music
Volume Up
Amplify your music
AQ10 + AQ11 ANATOMY
Drybox
Watertight space to stash your stu
3.5 mm Auxiliary Audio Jack
Stream by wire
USB Charge Out
Press to get the party started
SECTION 2
GETTING
STARTED
AQ10 + AQ11 QUICK START
Make sure the Lock Switch is flipped to unlocked
Press the Power button until you hear chimes
AQ10 + AQ11 automatically go into pairing mode, and the Pair LED blinks
Go to your device’s Bluetooth settings, pick LIFEPROOF AQ10 or LIFEPROOF AQ11 and follow the
manufacturer’s pairing instructions
When you connect, the speaker chimes and the Pair LED slowly pulses
To connect a different device, press the Pair button until it blinks and chimes, and follow the
same steps
Pick a track and hit Play
Use the Volume Up, Volume Down, Back and Forward buttons to control the music
Press Play to pause the music — press it again to resume
Press and hold the Power button until you hear a chime to turn AQ10 + AQ11 off
SECTION 3
DRYBOX
AQ10 + AQ11 DRYBOX
To open the Drybox, slide the latch and pull up on the lid
Stash your stuff in the compartment — it’s watertight when fully closed
Use the 3.5 mm Auxiliary Audio Jack and USB ports to connect small, Wi-Fi devices and other audio
sources
To close, slide the latch, push down on the lid until seated and release the latch
SECTION 4
EXTERNAL
AUDIO SOURCES
Loading...