HAMMER STRENGTH EQUIPMENT
PLSHC - Plate Loaded Super Horizontal Calf
Exploded View
Seat Adjustment
Weldment
Front Fr ame
Pads
Top Cross-Member
Movement Ar
Seat Frame
1 of 7
HAMMER STRENGTH EQUIPMENT
PLSHC – Exploded Assembly
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 PLSHC-BX - 0 Bottom Cross-Fr am e we ldment
2 2 PLSHC-SF-0 Side-Frame Weldment
3 24 H-BACK-WASH Backing Washer
4 18 HHB.5X3 1/2 X 3 Bolt
5 34 WASH.5STAR 1/2" Internal Lock Washer
6 24 N UT.5LOCK 1/2" Thick Lock Nu t
7 1 PLSHC-FX - 0 Front Cr oss-Frame Weldmen t
8 4 H-PEND3 1 1/2 X 3 End Cap
9 1 PLSHC-CHX-0 e45t
10 6 HHB.5X2.5 1/2 X 2 1/2 Bolt
11 8 N UT.5JAM LOCK 1/2" Th in Lock Nut
12 2 H-B EAR-SML Small Bearing
13 1 PLSHC- C MX - 0 Middle Cross Membe r Assy
14 1 PLSHC- CMAL- 0 Movement Arm Assy - Left
ITEM NO.QTY.PART NO. DESCRIPTION
15 1 PLSHC-CMAR-0 e45t
16 1 PLSHC-TX-0 T op Cross-Member Weldment
17 1 PLSHC-CST-0 Seat Frame Assy
18 1 PLSHC-SX-0 Support Weldment
19 6 HHB.5X4.5 1/2 X 4 1/2 Bolt
20 1 PLSHC-CAJ_ST-0Adj Seat Assy
21 2 SHC-19-0
22 1 UPLLP-BP
23 1 U13-5 Standar d 13" Pad
24 6 WASH.37 5 SAE 3/8" SAE Flat Washer
25 6 HHB.375X2.5 3/8 X 2 1/2 Bolt
26 2 HHB.5X2 1/2 X 2 Bolt
27 4 H-NONSKID1 1 1/4 X 9 Nonskid
2 of 7
HAMMER STRENGTH EQUIPMENT
PLSHC – Front Frame
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 PLSHC-MX-0 Front Frame
2 4 H-NONSKID 3 2 5/8 X 9 Nonskid
3 3 STAY CLEAR Stay Clear Decal
4 1 SEATED CALF Product Decal
5 4 H-PEND3 1 1/2 X 3 End Cap
6 4 H-HPLUG Hole Plug
3 of 7