Liebherr SBNES3210RH, SBNBS3210 User Manual

Download

Page 1

Operating instructions

Combined BioFresh-freezer

050614

7085674 - 01

BNes/SBNes ... 6

Page 2

Appliance at a glance

Contents

1 Appliance at a glance............................................ 2

1.1 Description of appliance and equipment.................. 2

1.2 Range of appliance use............................................ 2

1.3 Conformity................................................................ 3

1.4 External dimensions of the appliance....................... 3

1.5 Saving energy.......................................................... 3

1.6 HomeDialog............................................................. 3

2 General safety information................................... 3

3 Controls and displays........................................... 4

3.1 Operating and control elements............................... 4

3.2 Temperature display................................................. 5

4 Putting into operation............................................ 5

4.1 Transporting the appliance....................................... 5

4.2 Installing the appliance............................................. 5

4.3 Changing over the door hinges................................ 6

4.4 Water connection..................................................... 8

4.5 Insertion into a row of kitchen units........................... 9

4.6 Disposing of packaging............................................ 9

4.7 Connecting the appliance......................................... 9

4.8 Switching on the appliance....................................... 9

5 Control.................................................................... 10

5.1 Brightness of the temperature display...................... 10

5.2 Child proofing........................................................... 10

5.3 Door alarm................................................................ 10

5.4 Temperature alarm................................................... 10

5.5 BioFresh compartment............................................. 10

5.6 Freezer compartment............................................... 12

6 Maintenance........................................................... 14

6.1 Defrosting with NoFrost............................................ 14

6.2 Cleaning the appliance............................................. 14

6.3 Cleaning the IceMaker............................................. 14

6.4 Customer service..................................................... 15

7 Malfunction............................................................. 15

8 Decommissioning.................................................. 16

8.1 Switching off the appliance....................................... 16

8.2 Taking the appliance out of service.......................... 16

9 Disposing of the appliance................................... 16

The manufacturer works constantly on the further development of all the types and models. Therefore please understand that we have to reserve the right to make design, equipment and technical modifications.

To get to know all the benefits of your new appliance, please read the information contained in these instructions carefully.

The instructions apply to several models. Differences may occur. Text relating only to specific appliances is marked with an asterisk (*).

Instructions for action are marked with a , the results of action are marked with a

1 Appliance at a glance

1.1 Description of appliance and equipment

Note

Shelves, drawers and baskets are arranged for optimum

energy efficiency on delivery.

Fig. 1

(1) Transport grips at back (10) Drain hole (2) Operating and control

elements

(3) Interior light (12) Cold storage accumulator (4) Bottle shelf (13) VarioSpace (5) Shelf, sectioned (14) Information system (6) Shelf (15) Drawers (7) Storage zone with rela-

tively dry climate

(8) BioFresh controller (17) Adjustable feet, transport

(9) HydroSafe

(11) IceMaker

(16) Type plate

grips at front, transport castors at back

1.2 Range of appliance use

Intended use

The appliance is suitable solely for cooling food in a domestic environment or similar. This includes use in, for example

in staff kitchenettes, bed and breakfast establishments,

by guests in country cottages, hotels, motels and other accommodation,

for catering and similar services in the wholesale trade.

Use the appliance solely in a domestic type of environment. All other applications are inadmissible.

Foreseeable misuse

2 * Depending on model and options

Page 3

General safety information

The following applications are expressly prohibited:

Storage and cooling of medicines, blood plasma, laboratory compounds or similar materials and products subject to the Medical Devices Directive 2007/47/EC

Use in potentially explosive areas

Improper use of the appliance can lead to damage to or spoilage of the stored goods.

Climate rating definitions

The appliance is set to operate within specific ambient temperature limits according to its climate rating. The correct climate rating for your appliance is indicated on the type plate.

Note

Compliance with the ambient temperatures

indicated is required, otherwise the cooling performance is reduced.

Climate rating

SN 10 °C to 32 °C

N 16 °C to 32 °C

ST 16 °C to 38 °C

T 16 °C to 43 °C

for ambient temperatures of

1.3 Conformity

The refrigerant circuit is tested for leakage. The appliance complies with the relevant safety regulations and EC Directives 2006/95/EC, 2004/108/EC, 2009/125/EC and 2010/30/EU.

The BioFresh compartment satisfies the requirements of a chill compartment to EN ISO 15502.

Note for test institutions:

Tests are to be carried out according to the applicable standards and guidelines. Preparation and testing of the appliances must be carried out taking the manufacturer's loading plans and the

notes in the operating manual into account.

1.4 External dimensions of the appliance

Fig. 2

For appliances supplied with wall spacers, the measurement

increases by 35 mm (see 4.2) .

1.5 Saving energy

Always ensure good ventilation. Do not cover ventilation

openings or grille. Always keep fan louvres clear.

Do not place appliance in areas of direct sunlight or next to a

stove, heater or similar object. The energy consumption depends on the installation condi-

tions, e.g. the ambient temperature (see 1.2) . Keep the time the appliance is open to a minimum.

The lower the temperature setting, the higher the power

consumption. Store food logically. (see Appliance at a glance).

Ensure that all food is well packed and covered for storage.

This will prevent frost from forming. Remove food as needed in order that it does not warm too

much. First cool warm food to room temperature before storing it .

Accumulated dust increases the energy consumption:

Once a year, dust the refrigerating unit

together with the metal grille of the heat exchanger at the back of the appliance.

1.6 HomeDialog

Depending on model and options, the HomeDialog system can be used to network a number of Liebherr appliances (situated, for example, in the basement) with a main appliance (sited, for example, in the kitchen) and control them via the latter. You will find more information on the benefits, requirements and principle of operation on the internet at www. liebherr.com.

2 General safety information

Danger for the user:

This appliance can be used by children of 8 years old and over, and also by persons with restricted physical, sensory or mental

* Depending on model and options 3

Page 4

Controls and displays

capacity or lack of experience and knowledge, if they are supervised or have been instructed on safe use of the appliance and understand the resulting risks. Children must not be allowed to play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.

When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable.

In the event of a fault pull out the mains plug or deactivate the fuse.

Do not damage the mains power cable. Do not operate the appliance with a defective mains power cable.

Have any repairs to or intervention in the appliance, and any change of the mains power cable, carried out by the customer service only or by other specialised personnel trained for the purpose.

Only assemble, connect and dispose of the appliance according to the instructions.

Please keep these instructions in a safe place and pass them on to any subsequent owners.

All repairs to and intervention in the IceMaker may be carried out only by service personnel or by other skilled personnel trained for the purpose.

The manufacturer is not liable for damage caused by a faulty fixed water connection.

Special-purpose lamps (incandescent lamps, LEDs, fluorescent tubes) in the appliance serve to illuminate the appliance interior and are not suited for room illumination.

Fire hazard:

The refrigerant R 600a is environmentally friendly but flammable. Escaping refrigerant may ignite.

•

Do not damage the refrigerant circuit pipes.

•

Do not allow naked flames or ignition sources to enter the appliance.

•

Do not use any electrical appliances in the interior (e.g. steam cleaners, heaters, ice cream maker etc.).

•

If refrigerant escapes: remove any naked flames or sources of ignition from the leakage area. Ventilate the room well. Notify the after-sales service.

Do not store explosives or sprays using combustible propellants such as butane, propane, pentane, etc. in the appliance. To identify these spray cans, look for the list of contents printed on the can, or a flame symbol. Gases possibly escaping may ignite due to electrical components.

Keep burning candles, lamps and other items with naked flames away from the appliance so that they do not set the appliance on fire.

Please be sure to store alcoholic drinks or other packaging containing alcohol in tightly closed containers. Any alcohol that leaks out may be ignited by electrical components.

Danger of tipping and falling:

Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particularly to children.

Danger of food poisoning:

Do not consume food which has been stored too long.

Danger of frostbite, numbness and pain:

Avoid lasting skin contact with cold surfaces or refrigerated/frozen food or take protective steps, e.g. wear gloves. Do not consume ice cream, water ice or ice cubes immediately and do not consume them too cold.

Danger of injury and damage:

Hot steam can lead to injury. Do not use electrical heating or steam cleaning equipment, open flames or defrosting sprays to defrost.

Do not use sharp implements to remove the ice.

Please observe the specific information in the other sections:

DANGER identifies a situation involving direct

danger which, if not obviated, may result in death or severe bodily injury.

WARNING identifies a dangerous situation

which, if not obviated, may result in death or severe bodily injury.

CAUTION identifies a dangerous situation

which, if not obviated, may result in minor or medium bodily injury.

NOTICE identifies a dangerous situation

which, if not obviated, may result in damage to property.

Note identifies useful information and tips.

3 Controls and displays

3.1 Operating and control elements

Fig. 3

(1) BioCool button (11) SuperFrost button

4 * Depending on model and options

Page 5

Putting into operation

(2) On/Off button, BioFresh

compartment

(3) Up setting button,

BioFresh compartment

(4) Down setting button,

BioFresh compartment

(5) BioCool symbol (15) Menu symbol (6) BioFresh compartment

temperature display

(7) IceMaker symbol (17) Freezer compartment

(8) Up setting button,

freezer compartment

(9) Down setting button,

freezer compartment

(10) On/Off button, freezer

compartment

(12) Alarm button

(13) Power failure symbol

(14) Child lock symbol

(16) HomeDialog symbol

temperature display

(18) Alarm symbol

(19) SuperFrost symbol

3.2 Temperature display

The following are displayed in normal operation:

the warmest freezing temperature

the average BioFresh temperature

The freezer compartment temperature display flashes:

the temperature setting is being changed

after switch-on the temperature is not yet cold enough

the temperature has risen several degrees

Dashes flash in the display:

the freezer temperature is above 0 °C.

The following displays indicate malfunction. Possible causes and corrective action (see Malfunction).

F0 to F9

The LED of the power failure symbol

flashes.

4 Putting into operation

4.1 Transporting the appliance

CAUTION

Risk of injury and danger of damage as a result of incorrect transport!

Transport the appliance in a packed condition.

Transport the appliance upright.

Do not transport the appliance without assistance.

4.2 Installing the appliance

WARNING

Risk of fire due to short circuit! If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains cable/ connector may be damaged by the appliance vibrations, leading to a short circuit.

Stand the appliance so that it is not touched by connectors

or main cables. Do not plug the appliance or any others into sockets located

near the rear of the appliance.

WARNING

Fire hazard due to refrigerant! The refrigerant R 600a is environmentally friendly but flammable. Escaping refrigerant may ignite.

Do not damage the piping of the refrigeration circuit.

WARNING

Fire hazard and danger of damage!

Do not place appliances emitting heat e.g. microwaves,

toasters etc. on the appliance!

NOTICE

Risk of damage due to condensate! If your appliance is not a Side-by-Side (SBS) appliance:

do not install the appliance directly alongside a further refrig-

erator/freezer.

In the event that the appliance is damaged, contact the

supplier immediately before connecting to the mains. The floor at the site must be flat and level.

Do not install the appliance in a location where it is exposed

to direct radiation of the sun, next to a cooker, heater and similar. Always stand the appliance backed directly to the wall using

the enclosed wall spacers (see below). The appliance may be moved only when it is empty.

Do not install the appliance without assistance.

The more R 600a refrigerant there is in the appliance, the

larger the room in which the appliance is standing needs to be. In rooms that are too small, a flammable mix of gas and air may be created if there is a leak. According to the EN 378 standard, every 11 g of R 600a refrigerant requires at least 1 m3 space in the room for the appliance. The amount of refrigerant in your appliance is on the type plate inside the appliance.

Detach the connecting cable from the rear of the appliance,

removing the cable holder at the same time because otherwise there will be vibratory noise! Remove the protective film from the outside of the appli-

ance.

NOTICE

WARNING

Fire hazard due to dampness! If live parts or the mains lead become damp this may cause short circuits.

The appliance is designed for use in enclosed areas. Do not

operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.

The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompanying care product.

Otherwise the surface coating will be affected.

Wipe the coated door surfaces using a soft, clean cloth

only. Apply a stainless steel cleaner only to the stainless steel

side walls evenly, wiping with the grain. Subsequent cleaning becomes easier as a result. Wipe side walls with a paint finish using a soft, clean

cloth only.

* Depending on model and options 5

Page 6

Putting into operation

Remove all transit supports.

The spacers supplied with some appliances must be used to achieve the stated energy consumption. These will extend the depth of the appliance by approx. 35 mm. The appliance is fully functional if the spacers are not used, but does have a slightly higher energy consumption.

In the case of an appliance with

enclosed wall spacers, mount the wall spacers on the back of the appliance at the top left and right.

Dispose of packaging material (see 4.6) .

Align the appliance so that it

stands firmly and on a level by applying the accompanying spanner to the adjustableheight feet (A) and using a spirit level. Then support the door: Extend

the adjustable foot at the turn hinge (B) until it rests on the floor and then make a further 90° turn.

When a Side-by-Side appliance (S…) is fitted together with a second appliance (as a SBS combination): Proceed according to the Side-by-Side combined fridge-

freezer installation instructions. (Accessories bag of the SBS freezer/appliance with freezer compartment)

Note

Clean the appliance (see 6.2) .

4.3.1 Detaching the upper door

Fig. 4

Close the upper door.

Pull off the cover

Lift off the cover

CAUTION

Risk of injury if the door tips!

Take good hold of the door.

Set down the door carefully.

Unscrew the upper turn hinge

Fig. 4 (4)

Lift up the upper door and set it aside.

and lift it off.

Fig. 4 (1)

Fig. 4 (2)

forwards and upwards.

Fig. 4 (3)

4.3.2 Detaching the lower door

Close the lower door.

Draw the middle bearing pin

and lower door. Remove the plastic cap

Fig. 5 (11)

Fig. 5 (10)

(2x Torx® 25)

out of the turn hinge

If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance.

Always see to good ventilation at the installation site.

4.3 Changing over the door hinges

You can change over the door hinges if necessary.

NOTICE

Risk of damage to side-by-side appliances due to condensation! When a side-by-side appliance (S…) is fitted together with a second appliance (as a SBS combination), the door hinges must remain as delivered.

Do not change over the door hinges.

Ensure that the following tools are to hand:

Torx® 25

Torx® 15

Screwdriver

Cordless screwdriver, if necessary

Second person for fitting work, if needed

Accompanying Allen key size 2*

CAUTION

Risk of injury if the door tips!

Take good hold of the door.

Set down the door carefully.

Open the lower door.

Unscrew the middle turn hinge (2x Torx® 25).

Lift up the door and set it aside.

Fig. 5 (13)

4.3.3 Transferring the middle bearing elements

Fig. 5

Carefully detach the cover panel

Turn the middle turn hinge

Fig. 5 (14)

new hinge side (with 4 Nm).

through 180° and screw it firmly into place on the

Fig. 5 (12)

Fig. 5 (13)

with the washer

6 * Depending on model and options

Page 7

Putting into operation

Turn the cover panel

into place again on the new handle side.

Fig. 5 (12)

through 180° and snap it

4.3.4 Distinguishing between bearing elements

Some appliances are height-adjustable, as can be noted from the bearing pin in the lower turn hinge:

For appliances without

height adjustment, continue with item (see 4.3.5) .

For appliances with

height adjustment, continue with item (see 4.3.6) .

4.3.5 Transferring the lower bearing elements

For appliances without height adjustment

Using the accompanying Allen key, unscrew the threaded

Fig. 7 (40)

Turn and lift out the bearing pin

washer Lift out the stopper

Unscrew

Fully unscrew the threaded pin

the opposite side, at the turn hinge, until it is flush outside with the turn hinge. Unscrew

it to the opposite location hole of the turn hinge and screw it firmly into place. Re-insert the stopper

Carefully lift off the cover on the handle side

transfer it to the opposite side. Screw the turn hinge

hinge side, possibly using a cordless screwdriver (with 4 Nm).

Screw the bearing pin

with washer and adjustable-height foot. Tighten the threaded pin

by about 1 turn.

Fig. 7 (23)

Fig. 7 (26)

Fig. 7 (29)

and adjustable-height foot

Fig. 7 (22)

Fig. 7 (21)

the turn hinge

the bearing element

Fig. 7 (21)

Fig. 7 (25)

Fig. 7 (40)

Fig. 7 (22)

Fig. 7 (40)

Fig. 7 (25)

and screw it in on

Fig. 7 (28)

into the other hole.

firmly into place on the new

into place again, complete

together with the

Fig. 7 (24)

, transfer

Fig. 7 (27)

Fig. 7

and

Lift out the bearing pin

Fig. 6 (23)

Lift off the stopper

Unscrew

it to the opposite location hole of the turn hinge and screw it firmly into place. Carefully lift off the cover on the handle side

transfer it to the opposite side. Screw the turn hinge

hinge side, possibly using a cordless screwdriver (with 4 Nm).

Re-insert the stopper

Re-insert the bearing pin

and foot. In so doing, pay attention that the locating lug points backwards

and foot

Fig. 6 (26) Fig. 6 (29)

Fig. 6 (22)

Fig. 6 (24)

Fig. 6 (21)

the turn hinge

the bearing element

Fig. 6 (25)

Fig. 6 (21)

Fig. 6 (25)

firmly into place on the new

into the other hole.

Fig. 6 (22)

together with washer

Fig. 6 (28)

, transfer

Fig. 6 (27)

together with washer

4.3.6 Changing the bearing parts

For appliances with height adjustment

Fig. 6

and

4.3.7 Transferring the handles

On both the upper and lower door:

Transfer the spring clamp

Fig. 8 (31)

latch nose and pull the spring clamp off over it. Slide the spring clamp

into place on the new hinge side until it clicks into place.

Fig. 9

: Depress the

Fig. 8

* Depending on model and options 7

Page 8

Putting into operation

Lift the stopper

transfer it. Detach door handle

sure plates When fitting the pressure plates on the opposite side, make

sure they snap properly into place*

Fig. 9 (30)

Fig. 9 (32)

Fig. 9 (34)

out of the door bearing bush and

, stopper

and transfer to the opposite side.

Fig. 9 (33)

and pres-

4.3.8 Fitting the lower door

Place the lower door from above onto the lower bearing pin

Fig. 7 (22)

Close the door.

Place the plastic cap

hinge Place the middle bearing pin

the new hinge side, through the middle turn hinge

Fig. 5 (13)

Fig. 5 (10)

Fig. 5 (11)

back onto the middle turn

in the lower door, on

4.3.9 Fitting the upper door

Place the upper door on the middle bearing pin

Insert the upper turn hinge

hinge side. Screw the upper turn hinge firmly into place (with 4 Nm)

(2x Torx® 25) with a bradawl or use a cordless screwdriver. Apply the cover

site side from the outside and snap them into place.

Fig. 4 (4)

Fig. 4 (1)

Fig. 4 (3)

. Possibly make preliminary holes

and cover

in the door on the new

Fig. 4 (2)

Fig. 5 (11)

to the oppo-

4.3.10 Aligning the doors

If necessary, align the doors to the appliance housing by

way of the two oblong holes in the bottom turn hinge

Fig. 7 (25)

unscrew the middle screw in the bottom turn hinge

Fig. 7 (25)

and middle turn hinge

Fig. 5 (13)

. To do so,

Fig. 10

- The water pressure has to be between 0.15 MPa and

0.6 MPa (1.5 bar - 6 bar).

- The water supply to the appliance must be via a cold water pipe which withstands the operating pressure and complies with the hygiene regulations. Use the accompanying stainless steel hose (1.5 m). Do not reuse old hoses. A 3 m hose is available from the customer service department and has to be fitted by an expert. In the hose connecting piece is a sieve with seal.

- Between the hose and the domestic water connection there has to be a stopcock to interrupt the water supply in case of need.

- All the fixtures and fittings used for water supply have to comply with the applicable regulations of the respective country.

- Do not damage or kink the water inlet pipe when installing the appliance.

WARNING

Risk of injury due to the door dropping out! If the bearing parts are not screwed into place firmly enough, the door may drop out. This may lead to severe injuries. What is more, the door may not close and therefore the appliance may fail to cool properly.

Screw the turn hinges firmly into place with 4 Nm.

Check all of the screws and retighten if necessary.

4.4 Water connection

WARNING

Danger of electric shock!

Disconnect the appliance by unplugging it before you

connect it to the water line. Shut off the water supply before you connect the water feed

lines of the IceMaker. The connection to the drinking water system may be carried

out only by a qualified gas fitter and plumber.

WARNING

Risk of poisoning!

The water quality has to comply with the drinking water ordi-

nance of the respective country (e.g. 98/8 Connect to the drinking water supply only.

The IceMaker serves exclusively for making ice cubes in

household quantities and has to be operated with water suitable for the purpose.

Fig. 11

Connect the straight part of the accompanying stainless

steel hose to the stopcock.

The solenoid valve is at the bottom back of the appliance. It has a metric R3/4 connecting thread.

Connect the angled part of the stainless steel hose to the

solenoid valve. Open the stopcock of the water supply and

check that the entire water system is leakproof. Before initial use: Have the water pipe bled of air by the proper

expert.

8 * Depending on model and options

Page 9

Putting into operation

4.5 Insertion into a row of kitchen units

Fig. 12

(1) Stack cabinet (3) Kitchen cabinet (2) Appliance (4) Wall

For appliances supplied with wall spacers, the measurement

increases by 35 mm (see 4.2) . The appliance can be inserted into a row of kitchen units. To

match the appliance a suitable stack cabinet appliance.

When installing with kitchen units (max. depth 580 mm), the appliance can be positioned directly next to the kitchen cabinet

Fig. 12 (3)

and 50 mmx in the centre of the appliance in relation to the kitchen cabinet front.

Ventilation requirements:

At the back of the stack cabinet there has to be a ventilation

duct of at least 50 mm depth throughout the width of the stack cabinet. The ventilation space under the ceiling has to be at least

300 cm2. the larger the ventilation space, the more energy-saving the

appliance is in operation.

If the appliance is installed with the hinges next to a wall

Fig. 12 (4)

at least 40 mm. This corresponds to the projection of the handle when the door is open.

. The appliance will project by 34 mmx at the sides

, the distance between appliance and wall has to be

Fig. 12 (2)

Fig. 12 (1)

to the height of the row of units,

can be fitted above the

4.6 Disposing of packaging

The packaging is made of recyclable materials:

corrugated board/cardboard

expanded polystyrene parts

polythene bags and sheets

polypropylene straps

nailed wooden frame with polyethylene panel*

Take the packaging material to an official collecting point.

4.7 Connecting the appliance

NOTICE

Risk of damage to the electronic control system!

Do not use stand-alone inverters (conversion of d.c. to a.c./

three-phase) or energy saving plugs.

WARNING

Fire and overheating hazard!

Do not use extension cables or multiple socket outlets.

The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see Appliance at a glance).

The socket must be properly earthed and fused. The tripping current for the fuse must be between 10 A and 16 A.

The socket must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. It must be outside the area of the rear of the appliance.

Check the electrical connection.

Plug in the power plug.

4.8 Switching on the appliance

Note

To switch on the entire appliance it is necessary only to

switch on the freezer compartment.

Switch on the appliance approx. 2 hours before adding frozen food for the first time.

Do not load food to be frozen before the temperature display reads -18 °C.

4.8.1 Switching on the freezer compartment

Press On/Off button, freezer compartment

The temperature display of the BioFresh compartment indi-

cates the current temperature inside. The temperature display of the freezer compartment and the

alarm symbol flash until the temperature is sufficiently low. If the temperature is above 0 °C, dashes flash. If it is below, the current temperature flashes. If “DEMO” is displayed, demo mode is activated. Please

contact the after sales service.

4.8.2 Switching on the BioFresh compartment

Press the On/Off button, BioFresh compartment

The temperature display shines.

The interior light is on when the door is open.

Fig. 3 (10)

Fig. 3 (2)

WARNING

Danger of suffocation due to packing material and plastic film!

Do not allow children to play with packing material.

* Depending on model and options 9

Page 10

Control

5 Control

5.1 Brightness of the temperature display

You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed.

5.1.1 Adjusting the brightness

The brightness is adjustable between h0 (no illumination) and

h5 (maximum luminosity).

To activate the setting mode: press the SuperFrost button

Fig. 3 (11)

The display indicates c. The menu symbol

Using the Up setting button, freezer compartment

or Down setting button, freezer compartment select h. To confirm: briefly press the SuperFrost button

To make the display brighter: press Up button,

freezer compartment To make the display darker: press Down button,

freezer compartment To confirm: press SuperFrost button

The brightness is adjusted to the new value.

To deactivate the set-up mode: press On/Off button, freezer

compartment

-or-

Wait for 5 minutes.

The temperature is indicated again in the temperature

display.

5.2 Child proofing

The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children.

5.2.1 Setting the child lock function

To activate the setting mode: press SuperFrost button

Fig. 3 (11)

c flashes on the display.

The menu symbol

Briefly press the SuperFrost button

When c1 is indicated in the display: Tto activate the child lock, briefly press the

SuperFrost button

for about 5 s.

Fig. 3 (15)

Fig. 3 (8)

Fig. 3 (9)

Fig. 3 (10)

for about 5 s.

Fig. 3 (15)

Fig. 3 (11)

shines.

Fig. 3 (11)

Fig. 3 (8)

Fig. 3 (9)

Fig. 3 (11)

.to confirm.

If the door is open for longer than 60 seconds, the audible warning will sound.

The audible alarm is automatically silenced when the door is closed.

5.3.1 Muting the door alarm

The audible alarm can be muted when the door is open. The sound switch-off function is active as long as the door is left open.

Press alarm button

The door alarm is silenced.

Fig. 3 (12)

5.4 Temperature alarm

The audible alarm sounds if the freezer temperature is not cold enough.

At the same time, the temperature display and LED

of the alarm symbol

The cause of the temperature being too high may be:

warm fresh food was placed inside

too much warm ambient air flowed in when rearranging and

removing food power failure for some time

the appliance is faulty

The audible alarm is automatically silenced, the alarm symbol

Fig. 3 (18)

when the temperature is sufficiently cold again. If the alarm status persists: (see Malfunction).

Note

Food may be spoilt if the temperature is not cold enough.

goes out and the temperature display stops flashing

Check the quality of the food. Do not consume spoiled food.

Fig. 3 (18)

flashes.

5.4.1 Muting the temperature alarm

The audible alarm can be muted. When the temperature is sufficiently cold again, the alarm function is active again.

Press alarm button

The audible alarm is silenced.

Fig. 3 (12)

5.5 BioFresh compartment

The BioFresh compartment allows some types of fresh food to be stored up to three times longer than in conventional refrigerators, without compromising quality.

For food with an indicated best before date, the date specified on the packaging always applies.

The LED of the child lock symbol flashes in the display. When c0 is indicated in the display: to deactivate the child lock, briefly press the SuperFrost

button

Fig. 3 (11)

The LED of the child lock symbol flashes in the display.

To deactivate the set-up mode: press On/Off button, freezer

compartment

-or-

Wait for 5 minutes.

The temperature is indicated again in the temperature

display.

Fig. 3 (10)

Fig. 3 (14)

shines. c

goes out. c

5.5.1 HydroSafe

The HydroSafe at the moist setting is suited for storing unwrapped salad, vegetables and fruit with high inherent moisture. When the drawer is well filled, a dewy climate with up to 90% humidity is established. The humidity in the compartment depends on the moisture content of the food stored and on the opening frequency. You can set the humidity yourself.

5.5.2 Storing food

Note

Vegetables sensitive to cold, such as cucumbers, auber-

gines, semi-ripe tomatoes, zucchinis and all tropical fruits sensitive to cold, do not belong in the BioFresh compartment.

5.3 Door alarm

For refrigerator / BioFresh compartment and freezer compartment

10 * Depending on model and options

Page 11

To prevent food spoilage due to transfer of germs: Store

unwrapped animal and vegetable products separate from one another in the drawers. This also applies to different sorts of meat. If food has to be stored together due to lack of space: wrap the food.

5.5.3 Storage times

Standard values for storage time at low humidity

Butter up to 90 days

Hard cheese up to 110 days

Milk up to 12 days

Sausage, cold meat up to 9 days

Poultry up to 6 days

Pork up to 7 days

Beef up to 7 days

Game up to 7 days

Control

Standard values for storage time at high humidity

Strawberries up to 7 days

Figs up to 7 days

Blueberries up to 9 days

Raspberries up to 3 days

Currants up to 7 days

Sweet cherries up to 14 days

Kiwis up to 80 days

Peaches up to 13 days

Plums up to 20 days

Cranberries up to 60 days

Rhubarb up to 13 days

Gooseberries up to 13 days

Grapes up to 29 days

Note

Please note that protein-rich food deteriorates faster, i.e.

shellfish and crustaceans deteriorate faster than fish, fish faster than meat.

Standard values for storage time at high humidity

Vegetables, salad

Artichokes up to 14 days

Celery up to 28 days

Cauliflower up to 21 days

Broccoli up to 13 days

Chicory up to 27 days

Lamb's lettuce up to 19 days

Peas up to 14 days

Kale up to 14 days

Carrots up to 80 days

Garlic up to 160 days

Kohlrabi up to 55 days

Lettuce up to 13 days

Herbs up to 13 days

Leek up to 29 days

Mushrooms up to 7 days

Radishes up to 10 days

Brussels sprouts up to 20 days

Asparagus up to 18 days

Spinach up to 13 days

Savoy cabbage up to 20 days

Fruit

Apricots up to 13 days

Apples up to 80 days

Pears up to 55 days

Blackberries up to 3 days

Dates up to 180 days

5.5.4 Setting the temperature

The temperature in the BioFresh compartmentis automatically regulated to just above 0 °C.

You can adjust the temperature slightly colder or warmer. The temperature can be adjusted from b1 (coldest temperature) to

b9 (warmest temperature). The presetting is b5. At the b1 to b4

settings the temperature may drop below 0 ° C and therefore the food may freeze slightly.

For a warmer temperature adjustment: press Up setting

button, BioFresh compartment For a colder temperature adjustment: press Down setting

button, BioFresh compartment When pressed the first time, the BioFresh temperature

display indicates the value so far. To change the temperature in steps: briefly press the button.

-or-

To change the temperature continuously: hold down the

button.

During the adjustment, b1 to b9 are displayed. The actual temperature is displayed about 5 s after the last

press of a button. The temperature slowly adjusts to the new value.

Fig. 3 (3)

Fig. 3 (4)

5.5.5 BioCool

With BioCool you switch to top cooling performance. Use BioCool to rapidly cool large quantities of food.

BioCool has a slightly higher energy consumption.

Switching on BioCool

Briefly press the BioCool button

The LED of the BioCool symbol

Switching off BioCool

Briefly press the BioCool button

The LED of the BioCool symbol

Fig. 3 (1)

Fig. 3 (5)

Fig. 3 (1)

Fig. 3 (5)

. shines.

. goes out.

5.5.6 Setting the humidity in the HydroSafe

Low humidity: move the regulator to

the left.

High humidity: move the regu-

lator to the right.

* Depending on model and options 11

Page 12

Control

5.5.7 Drawers

Fig. 13

Pull out the drawer, lift it at the back and draw it forwards for

removal. Push the rails in again!

Fig. 14

Pull out the rails.

Attach the drawer to the rails and push it in until it engages

audibly at the back.

5.5.8 Humidity control plate

Food once thawed should be re-frozen only in exceptional

cases.

5.6.3 Setting the temperature in the freezer

compartment

The appliance is pre-set for normal operation. The temperature can be set between -16 °C and -26 °C, the

recommended temperature is -18 °C.

To set the temperature higher: press Up button, freezer

compartment To set the temperature lower: press Down button, freezer

compartment When the button is pressed the first time, the previous value

is indicated in the temperature display of the freezer compartment. To change the temperature in 1 °C steps: briefly press the

button.

-or-

To change the temperature continuously: hold down the

button.

The value is displayed flashing during the setting operation.

The actual temperature is displayed approx. 5 seconds after

the button is last pressed. The temperature gradually adjusts to the new value.

Fig. 3 (8)

Fig. 3 (9)

Fig. 15

To remove the humidity control plate: Having removed the

drawers, carefully draw the plate forwards and lower it for removal. To insert the humidity control plate: Insert the cover mould-

ings of the plate into the rear holder neath and engage them in the holder

Fig. 15 (1)

Fig. 15 (2)

from under-

at the front.

5.6 Freezer compartment

You can store frozen food, make ice cubes and freeze fresh food in the freezer compartment.

5.6.1 Freezing food

The rating plate indicates the maximum quantity of fresh food you can freeze within 24 hours (see Appliance at a glance) under “Freezing capacity ... kg/24h”.

The maximum load of frozen food for the drawers is 25 kg each and for the shelves 35 kg each.

CAUTION

Risk of injury due to broken glass! Bottles and cans containing drinks may burst when being frozen. This applies particularly to sparkling drinks.

Do not freeze bottles and cans containing drinks!

In order that the food is rapidly frozen through to the core, do not exceed the following quantities per pack:

- Fruit, vegetables up to 1 kg

- Meat up to 2.5 kg Pack the food in portions in freezer bags, reusable plastic,

metal or aluminium containers.

5.6.2 Thawing food

- in the refrigerator compartment

- in a microwave oven

- in a conventional or fan oven

- at room temperature

5.6.4 SuperFrost

With this function you can freeze fresh food quickly through to the core. The appliance operates with maximum refrigeration. The noise of the refrigeration unit may be temporarily louder as a result.

The maximum amount of fresh food which can be frozen in 24 h is indicated on the type plate under “freezing capacity ... kg/ 24h”. This amount varies according to the model and climate rating.

You have to activate SuperFrost in good time, depending on how much fresh food is to be frozen: about 6 hours before placing the food inside in case of small amounts and about 24 hours in advance in case of the maximum amount of food to be frozen.

Wrap produce and spread it out as far as possible. Do not allow produce to be frozen to touch produce that is already frozen to prevent the latter thawing.

You do not have to activate SuperFrost in the following cases:

when placing frozen food in the freezer

when freezing up to approx. 2 kg fresh food daily

Freezing with SuperFrost

Briefly press the SuperFrost button

The LED of the SuperFrost symbol

The freezing temperature drops, the appliance operates with

the maximum cooling capacity. For a smaller quantity of produce to be frozen: wait approx. 6 h.

Place wrapped produce in the top drawers.

For the maximum quantity of produce to be frozen: wait approx. 24 h.

SuperFrost is automatically deactivated. Depending on the

quantity placed inside, after 30 h at the earliest, 65 h at the latest. The LED on the SuperFrost symbol

once freezing is completed. The appliance continues to operate in the energy-saving,

normal mode.

Fig. 3 (11)

Fig. 3 (19)

once.

shines.

extinguishes

12 * Depending on model and options

Page 13

Control

5.6.5 Drawers

Note

The energy consumption increases and the cooling performance decreases if there is insufficient ventilation. For appliances with NoFrost:

Leave the bottom drawer in the appliance!

Always keep the air slits of the fan free at the rear wall!

To store frozen food directly on the shelves: pull the drawer

forwards and lift it out.

5.6.6 Shelves

To remove the shelf: lift up at the front

and pull out. To put the shelf back: simply push in as

far as it will go.

Using cold storage accumulators

Place the cold storage accumula-

tors in the top freezer compartment to save space. Place the frozen cold storage

accumulators on the frozen food in the upper front area of the freezer compartment.

5.6.10 IceMaker

The IceMaker is in the top drawer of the freezer compartment. The drawer is marked “IceMaker”.

Make certain that the following conditions are met:

The appliance is level.

The appliance is connected.

The freezer compartment is switched on.

The IceMaker is connected to the water supply.

Switching on the IceMaker

5.6.7 VarioSpace

Apart from being able to remove the drawers, you can also remove the shelves, creating space for large items of frozen food. Poultry, meat, large pieces of game and high bakery products can be frozen in one piece and prepared.

The maximum load of frozen

food for the drawers is 25 kg each and for the shelves 35 kg each.

5.6.8 Information system

Fig. 16

(1) Ready-made meals, ice

cream

(2) Pork, fish (5) Game, mushrooms (3) Fruit, vegetables (6) Poultry, beef/veal

The figures indicate the storage time in months for several types of frozen food in each case. Storage times given are guide times.

(4) Sausages, bread

5.6.9 Cold storage accumulators

The cold storage accumulators prevent the temperature from rising too fast in the event of power failure.

Fig. 17

Pull out the drawer.

Press the On/Off button

Fig. 17 (2)

Push in the drawer.

The LED of the IceMaker symbol

Note

The IceMaker produces ice cubes only if the drawer is fully

closed.

Producing ice cubes

The production capacity depends on the freezer temperature. The lower the temperature, the more ice cubes can be produced in a specific period.

The ice cubes drop from the IceMaker into the drawer. When a certain filling level has been reached, no further ice cubes are produced. The IceMaker does not fill the drawer right up to the brim.

If large quantities of ice cubes are needed, the complete IceMaker drawer can be exchanged for the adjacent drawer. When the drawer is closed, the IceMaker automatically recommences production.

Once the IceMaker has been switched on for the first time, it may take up to 24 hours until the first ice cubes are produced.

Note

When the appliance is used for the first time and if it has been out of use for a long time, particles may collect in the IceMaker and/or water conduit.

Therefore do not use or consume the ice cubes made in the

first 24 hours.

Setting the water intake time

The opening time of the IceMaker valve can be set if, for example, the water pressure in the pipe is too low or too high.

The water intake time can be set in stages from E1 (short intake time) to E8 (long intake time). The intake is preset at E3.

To activate the setting mode: press the SuperFrost button

Fig. 3 (11)

The display indicates c. Themenu symbol

shines.

for about 5 s.

Fig. 3 (15)

Fig. 17 (1)

Fig. 3 (7)

shines.

so that the LED

shines.

* Depending on model and options 13

Page 14

Maintenance

Using the Up setting button, freezer compartment

and Down setting button, freezer compartment select E. To confirm: briefly press the SuperFrost button

To increase the water intake time: press the Up

setting button, freezer compartment To reduce the water intake time: press the Down

setting button, freezer compartment To confirm: press the SuperFrost button

To deactivate the setting mode: press the On/Off button,

freezer compartment

-or-

Wait for 5 minutes.

Switching off the IceMaker

If no ice cubes are needed, the IceMaker can be switched off independently of the freezer compartment.

When the IceMaker is switched off, the IceMaker drawer can also be used for freezing and storing food.

Press the On/Off button for about 1 second until the LED

goes out. The LED of the IceMaker symbol

Clean the IceMaker.

This ensures that no water or ice remains in the IceMaker.

Fig. 3 (10)

Fig. 3 (8)

Fig. 3 (9)

Fig. 3 (7)

Fig. 3 (11)

goes out.

Fig. 3 (8)

Fig. 3 (9)

Fig. 3 (11)

6 Maintenance

6.1 Defrosting with NoFrost

Clean plastic outer and inner surfaces with lukewarm

water and a little washing-up liquid.

Do not apply stainless steel cleaning agent to glass or plastic surfaces to prevent them from being scratched. Darker areas at the beginning and quite an intensive colour of the stainless steel surface are normal.

NOTICE

The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompanying care product.

Otherwise the surface coating will be affected.

Wipe the coated door surfaces using a soft, clean cloth

only. In case of stubborn dirt, use a little water or a neutral cleaning agent. A microfibre cloth can be optionally used. If the stainless steel side walls are dirty, clean them using

a commercially available stainless steel cleaning agent. Then evenly apply the accompanying stainless steel care product, making strokes in the direction of the grain. Wipe side walls with a paint finish using a soft, clean

cloth only. In case of stubborn dirt, use a little water or a neutral cleaning agent. A microfibre cloth can be optionally used.

Clean drain hole: Remove deposits

with a narrow instrument, e.g. a cotton bud.

The NoFrost system automatically defrosts the appliance.

BioFresh compartment:

The defrost water evaporates due to the compressor heat.

Regularly clean the drain opening to allow the water to flow

away (see 6.2) .

Freezer compartment:

The moisture condenses on the evaporator, is periodically defrosted and evaporates.

The appliance does not have to be manually defrosted.

6.2 Cleaning the appliance

WARNING

Risk of injury and damage as a result of hot steam! Hot steam can lead to burns and can damage the surfaces.

Do not use any steam cleaners!

NOTICE

Incorrect cleaning damages the appliance!

Do not use cleaning agents in concentrated form.

Do not use any scouring or abrasive sponges or steel wool.

Please do not use any aggressive, scouring, sand-,

chloride-, chemical- or acid-based cleaning agents. Do not use chemical solvents.

Do not damage or remove the type plate on the inside of the

appliance. It is important for the customer service. Do not pull off, bend or damage cables or other compo-

nents. Do not allow any cleaning water to enter the drain channel,

ventilation grille or electrical parts. Please use soft cleaning cloths and a universal pH-neutral

cleaning agent. Please use cleaning and care products suitable for contact

with foodstuffs in the appliance interior.

Empty appliance.

Pull out the power plug.

Clean items of equipment by hand with lukewarm water

and a little washing-up liquid. Only use a damp cloth to clean the telescopic rails. The

grease in the runners is for lubrication purposes and must not be removed.

After cleaning:

Wipe dry the appliance and items of equipment.

Connect the appliance and switch it on again.

Switch on SuperFrost (see 5.6.4) .

When the temperature is sufficiently cold: Put the food back inside.

6.3 Cleaning the IceMaker

The drawer of the IceMaker has to be emptied and slid in.

To activate the setting mode: press the SuperFrost button

Fig. 3 (11)

The display indicates c. The menu symbol

Using the Up setting button, freezer compartment

Down setting button, freezer compartment To confirm: press the SuperFrost button

Using the Up setting button, freezer compartment

Fig. 3 (8)

ment To confirm: press the SuperFrost button

Fig. 3 (11)

The IceMaker moves into the cleaning position and switches

off. To deactivate the setting mode: press the On/Off button,

freezer compartment

-or-

Wait for 2 minutes.

The temperature is indicated again in the temperature

display. Remove the drawer.

Clean the ice cube tray and drawer with warm water. If

necessary, use mild washing-up liquid. Then rinse.

for about 5 s.

Fig. 3 (15)

/ Down setting button, freezer compart-

Fig. 3 (9)

select Ic.

Fig. 3 (10)

shines.

Fig. 3 (9)

Fig. 3 (11)

Fig. 3 (8)

select I.

14 * Depending on model and options

Page 15

Malfunction

Slide in the drawer again.

If washing-up liquid was used: throw away the first three loads of ice cubes to get rid of any

remaining washing-up liquid.

Either leave the IceMaker switched off in this position or switch the IceMaker on again (see 5.6.10) .

6.4 Customer service

First check whether you can correct the fault yourself by reference to the list (see Malfunction). If this is not the case, please contact the customer service whose address is given in the enclosed customer service list.

WARNING

Risk of injury if repair work is not carried out professionally!

Have any repairs and action - not expressly specified - on

the appliance and mains cable carried out by service personnel only. (see Maintenance)

Read the appliance

designation

Fig. 18 (1)

No.

Fig. 18 (2)

serial No. off the type plate located inside the appliance on the lefthand side.

, service

and

Fig. 18 (3)

Fig. 18

Notify the customer service, specifying the fault, appliance

designation

Fig. 18 (3)

This will help us to provide you with a faster and more accu-

rate service. Keep the appliance closed until the customer service

arrives. The food will stay cool longer.

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

Fig. 18 (1)

, service No.

Fig. 18 (2)

and serial No.

7 Malfunction

Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction nonetheless occurs during operation, check whether it is due to a handling error. In this case you will have to be charged for the costs incurred, even during the warranty period. You may be able to rectify the following faults yourself:

Appliance does not work.

The appliance is not switched on.

→

Switch on the appliance.

The power plug is not properly inserted in the wall socket.

→

Check power plug.

The fuse of the wall socket is not in order.

→

Check fuse.

The compressor runs for a long time.

The compressor switches to a low speed when little cold is

→

needed. Although the running time is increased as a result, energy is saved. This is normal in energy-saving models.

SuperFrost is activated.

→

The compressor runs for longer in order to rapidly cool the

food. This is normal. BioCool is activated.

→

The compressor runs for longer in order to rapidly cool the

food. This is normal.

A LED on the bottom rear of the appliance (at the compressor) flashes regularly every 15 seconds*.

The inverter is equipped with a diagnostic LED.

→

The flashing is normal.

Excessive noise.

Due to the various speed steps, speed-regulated*

→

compressors can generate different running noises. The sound is normal.

A bubbling and gurgling noise.

This noise comes from the refrigerant flowing in the refriger-

→

ation circuit. The sound is normal.

A quiet clicking noise.

The noise is produced whenever the refrigeration unit

→

(motor) automatically switches on or off. The sound is normal.

A hum. It is briefly a little louder when the refrigeration unit (the motor) switches on.

The refrigeration increases automatically when the

→

SuperFrost, function is activated, fresh food has just been placed in the appliance or the door has been left open for a while. The sound is normal.

The refrigeration increases automatically when the BioCool

→

function is activated, fresh food has just been placed in the appliance or the door has been left open for a while. The sound is normal.

The ambient temperature is too high.

→

Solution: (see 1.2)

Vibratory noise.

The appliance is not fixed to the ground. The running of the

→

cooling unit therefore makes objects and adjacent furniture vibrate.

Adjust appliance via the height-adjustable feet.

Move bottles and containers apart.

The temperature display indicates: F0 to F9

There is a fault.

→

Please contact the after-sales service (see Maintenance).

The temperature display reads:FE

There is a fault.

→

Please contact the after-sales service (see Maintenance).

Power failure flashes in the temperature display highest temperature reached during power failure is indicated in the temperature display.

The freezer temperature rose too high over the last hours or

→

days due to a power failure or power interruption. When the power interruption is over, the appliance will continue to operate in the last temperature setting.

To cancel the display of the warmest temperature: press

alarm button Check the quality of the food. Do not consume spoiled food.

Do not re-freeze thawed food.

DEMO shines in the temperature display.

The demo mode is activated.

→

Please contact the after-sales service (see Maintenance).

The outer surfaces of the appliance are warm*.

The heat of the refrigeration circuit is used to prevent

→

condensate from forming. This is normal.

The IceMaker cannot be switched on.

The appliance and therefore the IceMaker are not

→

connected. Connect the appliance to the mains (see Putting into opera-

tion).

Fig. 3 (12)

. The

* Depending on model and options 15

Page 16

Decommissioning

The IceMaker does not make any ice cubes.

The IceMaker is not switched on.

→

Switch on the IceMaker.

The drawer of the IceMaker is not properly closed.

→

Close the drawer properly.

The water connection is not open.

→

Open the water connection.

The water intake to the IceMaker has been interrupted.

→

Check the water connection (see Putting into operation).

Check the hosing (see Putting into operation).

The screen located in the end piece of the water intake

→

hose or the screen located in the connecting piece on the appliance is blocked. Clean the screens.

The temperature is not cold enough.

The door of the appliance is not properly closed.

→

Close the door of the appliance.

Insufficient ventilation.

→

Clear ventilation grilles.

The ambient temperature is too high.

→

Solution: (see 1.2) .

The appliance was opened too frequently or for too long.

→

Wait to see whether the appliance reaches the required

temperature by itself. If not, please contact the after sales service (see Maintenance). Too much fresh food was placed inside without SuperFrost.

→

Solution: (see 5.6.4)

The temperature is incorrectly set.

→

Set the temperature to a colder setting and check after 24

hours. The appliance is too close to a source of heat (stove, heater

→

etc). Change the position of the appliance or the source of heat.

The interior light is not on.

The appliance is not switched on.

→

Switch on the appliance.

The door was open longer than 15 min.

→

The interior light automatically switches off if the door has

been open for about 15 min. The LED illumination is defective or the cover is damaged:

→

WARNING

Risk of injury due to electric shock! Live parts are located under the cover.

Have the LED interior light changed or repaired only by the

customer service or by specialized personnel trained for the purpose.

8 Decommissioning

8.1 Switching off the appliance

Note

To switch off the entire appliance it is necessary only to

switch off the freezer compartment.

8.1.1 Switching off the freezer compartment

Press the freezer compartment On/Off button

Fig. 3 (10)

The temperature displays are dark. The appli-

ance is switched off.

for approx. 2 seconds.

8.1.2 Switching off the BioFresh compartment

Press BioFresh compartment On/Off button

approx. 2 seconds. The temperature display of the BioFresh compartment

Fig. 3 (6)

is dark. The BioFresh compartment is switched off.

Fig. 3 (2)

for

8.2 Taking the appliance out of service

Empty the appliance.

Put the IceMaker in the cleaning position (see Mainte-

nance). Pull out the power plug.

Clean the appliance (see 6.2) .

Leave the door open to prevent odour.

9 Disposing of the appliance

The appliance contains some reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws.

When disposing of the appliance, ensure that the refrigeration circuit is not damaged to prevent uncontrolled escape of the refrigerant it contains (data on type plate) and oil.

Disable the appliance.

Pull out the plug.

Cut through the connecting cable.

WARNING

Danger of injury by LED lamp! The light intensity of the LED illumination corresponds to laser class 1/1M. If the cover is defective:

Do not look into the illumination with optical lenses from the

immediate proximity. This can cause injury to the eyes.

16 * Depending on model and options

Page 17

Disposing of the appliance

* Depending on model and options 17

Page 18

Liebherr Hausgeräte Ochsenhausen GmbH * Memminger Strasse 77-79 * D-88416 Ochsenhausen * * www.liebherr.com