Page 1
High-Top Crane
20/4 0
1000 EC-H
Lifting capacity (max.): 50.0 t
Radius (max.): 81.4 m
Lifting capacity at the tip (max.): 11. 5 t
25/50
Powerful
and precise
Efficient transportation
Fast and safe erection
Powerful in use
Page 2
The new 1000 EC-H
Connect & Work
Fast and safe assembly from Liebherr
Connect & Work includes many simplified assembly features, combined with
more safety. Not only simplified mechanical features, even the electronic function
modules are modular. You only get this from Liebherr.
Safe electrical plug-in connections to drive systems and switchboards
Fast connections for jib and counter-jib
Assembly packages can be split easily to reduce the assembly weight
High level of working and assembly safety
1000 HC tower
in monoblock design
for rapid erection and
dismantling
Trolley travel gear
with integral rope
storage facility
Trolley travel tracks
with zinc dust coating
ensure a long service life
Jib
can be split into lengths of 40.0 m
to 80.0 m in steps of 5 m
Double trolley
with lifting beam for 4-fall
operation, 2-fall operation
is also possible
MICROMOVE
millimetric precision
with fine positioning
Practical assembly
technology
Fast, efficient erection using
the 1000 HC tower
The monoblock design of this tower system ensures
fast, easy erection and features high precision fits,
short erection time and a long service life.
Arrive safely
Slewing section can be completely containerised
Top part of the crane can be transported complete in 9 containers
Complete top part of the crane can be transported with just 8 trucks
Even more benefits
Simply well set-up
Connect & Work
Safety according to EN 14439
Low assembly weights
Can be assembled with small mobile cranes
Many safety features
Separable assembly packages
Working fast and safe – for sure
The latest generation of energy-efficient
Liebherr high performance drive units
Safety-based crane controls
Litronic version
LiDAT fleet management
Electronic function modules
- Electronic monitor system EMS
- Load-moment limiting system LMB
- Operating-range limiting system ABB
- Machine data recording system MDE
- Anti-collision system AKS (interface)
www.liebherr.com
www.facebook.com/LiebherrConstruction
Printed in Germany BK LBC-745-03.13_enGB
This information is supplied without liability. Subject to technical modifications.
1000 HC tower system
3.4 m x 3.4 m external dimensions
Climbing on the side of buildings
Durable taper pin connection entirely free from play
Suitable for high tower configuration heights
Simple, fast and safe erection
Mounted on undercarriage or foundation anchors
3.40 m
Powerful and precise
20/4 0
25/50
The largest EC-H crane in the Liebherr range is perfect for building
bridges, power stations and other plant and also for shipbuilding
yards and dams. The new 1000 EC-H has been improved to make
it easier to transport and erect and sets new standards in terms of
safety. High lifting capacities and the MICROMOVE fine positioning
system combine power and precision. The 1000 EC-H is available in
either a 20/40 t or 25/50 t version.
Counter-jib
can be transported using
one truck
Safe access
to all zones
Low maintenance high
performance hoist gears
of the latest generation
of SD.shift provide high
handling capacity
Slewing gears
for precise, smooth
slewing movements
- Load swing damping
- Wind force control
- Three adjustable
operating modes
Tower connection
Durable taper pin connection entirely free from play
Safe
non-slip cab access
Technical data
Version 20/40 25/50
Maximum lifting capacity
Maximum radius*
Maximum lifting capacity at the jib head
Maximum free-standing hook height
* Other r adii on re quest
40.0 t 50.0 t
81.4 m 81.4 m
11.5 t 11.0 t
88.4 m 85.5 m
Page 3
The new 1000 EC-H
Powerful and precise
The largest EC-H crane in the Liebherr range is perfect for building
bridges, power stations and other plant and also for shipbuilding
yards and dams. The new 1000 EC-H has been improved to make
it easier to transport and erect and sets new standards in terms of
safety. High lifting capacities and the MICROMOVE fine positioning
system combine power and precision. The 1000 EC-H is available in
either a 20/40 t or 25/50 t version.
Counter-jib
can be transported using
one truck
20/4 0
25/50
11.5 t lifting capacity
at the tip up to 81.4 m
radius
Jib
can be split into lengths of 40.0 m
to 80.0 m in steps of 5 m
The completely
Low maintenance high
performance hoist gears
of the latest generation
of SD.shift provide high
handling capacity
Safe access
to all zones
Slewing gears
for precise, smooth
slewing movements
- Load swing damping
- Wind force control
- Three adjustable
operating modes
Tower connection
Durable taper pin connection entirely free from play
Safe
non-slip cab access
Trolley travel gear
with integral rope
storage facility
1000 HC tower
in monoblock design
for rapid erection and
dismantling
Practical assembly
technology
Trolley travel tracks
with zinc dust coating
ensure a long service life
Double trolley
with lifting beam for 4-fall
operation, 2-fall operation
is also possible
MICROMOVE
millimetric precision
with fine positioning
Connect & Work
Fast and safe assembly from Liebherr
Connect & Work includes many simplified assembly features, combined with
more safety. Not only simplified mechanical features, even the electronic function
modules are modular. You only get this from Liebherr.
new EC-H slewing platform
The new slewing platform is designed for complete containerisation. Quick-release fastenings on
the cab and switchboard system ensure fast, easy erection. Small mobile cranes can be used for
this purpose. The slewing platform including the switchboard system and deluxe cab can be erected in a single hoist to reduce erection times.
High safety levels
using the latest
generation of controls
Fast erection
Just one hoist for
the complete head
Deluxe cab
Ergonomically designed
cab enables the driver
to work without fatigue
Technical data
Version 20/40 25/50
Maximum lifting capacity
Maximum radius*
Maximum lifting capacity at the jib head
Maximum free-standing hook height
* Other r adii on re quest
40.0 t 50.0 t
81.4 m 81.4 m
11. 5 t 11.0 t
88.4 m 85.5 m
Safe electrical plug-in connections to drive systems and switchboards
Fast connections for jib and counter-jib
Assembly packages can be split easily to reduce the assembly weight
High level of working and assembly safety
Quick-release
connections
for easy,
fast erection
Unbolting consoles
allow the machine to
be transported in full
in a container
Page 4
Arrive safely
Slewing section can be completely containerised
Top part of the crane can be transported complete in 9 containers
Complete top part of the crane can be transported with just 8 trucks
Even more benefits
Simply well set-up
Connect & Work
Safety according to EN 14439
Low assembly weights
Can be assembled with small mobile cranes
Many safety features
Separable assembly packages
Working fast and safe – for sure
The latest generation of energy-efficient
Liebherr high performance drive units
Safety-based crane controls
Litronic version
LiDAT fleet management
Electronic function modules
- Electronic monitor system EMS
- Load-moment limiting system LMB
- Operating-range limiting system ABB
- Machine data recording system MDE
- Anti-collision system AKS (interface)
www.liebherr.com
www.facebook.com/LiebherrConstruction
Printed in Germany BK LBC-745-03.13_enGB
This information is supplied without liability. Subject to technical modifications.
Loading...