Tower Crane Solutions Wind turbines
Tower cranes for use on wind turbines
Tower cranes for wind turbines
The 1000 EC-B 125 Litronic
Liebherr has developed special tower cranes for assembling wind turbines. These cranes feature economical transport, low area requirement for erection and precision operation even in high wind speeds.
The new 1000 EC-B 125 Litronic Flat-Top crane can lift a maximum of 125 tonnes and has been completely designed for assembling wind turbines.
Technical data
Max. lifting capacity |
125.0 |
t |
up to radius |
9.0 |
m |
Max. radius |
36.5 |
m |
Max. lifting capacity at the tip |
19.35 |
t |
Max. hook height (4-fall) |
195.0 |
m |
|
|
|
Guying
Despite the enormous height the cranes only have to be guyed once to the tower depending on the job in hand.
Bespoke solutions
Together we can develop the best foundation solution for your project.
High up
The tower crane climbs into the air all by itself. The 1000 EC-B 125 Litronic Flat-Top crane climbs up to twice as fast as conventional tower cranes using its completely new climbing equipment.
High wind speeds
As a result of their design, tower cranes can operate precisely even in high wind speeds.
Precise and safe
Even very heavy loads can be positioned precisely using MICROMOVE fine positioning mode.
Loading...