Liberty AV 1401405012-I Specifications

E-DAT™ Shielded Cable Termination Components

TM

IP20 RJ45 Field Plug Product Description

E-DAT Industry™ IP20 RJ45 field plug component # 1401405012-I allows you to use an
Ethernet Class E / Cat.6 connection for 10 BaseT, 100 BaseTX, 1000 BaseT and 10000 BaseT
(10G) networks and is backwards compatible for any RJ45 Ethernet cabling system. Unique
design enables dramatically faster field termination of screened (ScTP and F/UTP) and fully
shielded (S/FTP) four-pair 100 (balanced) copper cable. Field termination requires no spe­cial tools. Finger force press of two mating parts results in secure connection via 8-pole insu­lation displacement connection (IDC) with integrated shield bonding at plug housing and sep­arate strain relief. With the patented E-DAT Industry IP20 RJ45 field plug you can connect
installation cables (26/1 – 22/1 AWG) and patchcords (26/7 – 22/7 AWG). Optional compo­nent # 1401400810-I field plug insert enables IP67 ingress protection with the SteadyTec™

application solution when an enhanced
MICE environmental rating is required. Wire
color identification on both components per TIA T68A and TIA 568B is standard.
Includes passive PC board for proprietary Digital Signal Processing (DSP) compen­sation (phase and other cable parameters). The E-DAT Industry IP20 RJ45 field plug
meets or exceeds all TIA/EIA-568-B-2.10 draft augmented Cat. 6, EN 50173-1:2002
for Class E, and ISO/IEC 60603-7-5 for Cat. 6 component standard requirements at
swept frequencies up to 625 MHz. Solid Zinc die-cast housing (Ni plated) provides
optimal protection from Alien crosstalk via captive 360° shield connectivity spring
and precision design of wire staging or lay area that enables minimal untwisting
(0.5 inch or less) of cable pairs. This provides potential balance of shield/screen/foil
for EMF/RFI protection and shield attenuation of the link, per ISO/IEC 11801:2002­09 and EN50173-1:2002, meeting requirements of EMI proof per EN 55022-B and
EMI emissions per EN 50082-1. These unique design features are what enable fast
data rates up to 10G BaseT and the related longer life-cycle expected from this

futuristic product when used with a ready for 10G cabling system. BTR test data for both UTP and STP cabling systems are available.

Mechanical Data according to IEC 60603-7-5

Effectiveness of connector coupling devices 50 N
Mechanical operations 750 plug-in cycles
Insertion and withdrawal forces 30 N
Contact interface dimensions and plug
dimensions at the mating area according to IEC 60603-7

General Guidelines for Field Cabling Specifiers

Cable outer diameter 5.5 - 8.5 mm (0.2- 0.3inch) optionally to 10.5 mm (0.42 inch)
Wire diameter to 1.6 mm (0.063 inch)
Solid wire 26/1 - 22/1 AWG, 0.40 - 0.64 mm (0.016 - 0.025 inch)
Stranded wire 26/7 - 22/7 AWG, 0.48 - 0.76 mm (0.019 - 0.030 inch)
Shield connection (plug/cable) 360° contact, spring loaded

Electrical Data according to IEC 60603-7-5

Nominal current at 50° C 1A
Nominal Voltage max. 50 V d.c.
Voltage proof 1000 V d.c. or at a.c. peak, contact - to - contact

1500 V d.c. or at a.c. peak, contact - to - screen
Contact resistance 20 m Ohm
Input to output d.c. resistance 200 m Ohm
Insulation resistance 500 M Ohm

© 2007 BTR NETCOM, Inc. All Rights Reserved.
While BTR makes every effort to ensure the accuracy of information presented in this document, BTR reserves the right to make changes without notice. BTR does not assume any
liability arising out of the application or use of any product described herein. Values and dimensions are not contractual.

Data Transmission Category / Class

RF Transmission parameter Cat.6/Class E according to ISO/IEC 11801:9-2002 and EN50173-1:2002
Transfer impedance / shield attenuation Cat.6/Class E according to ISO/IEC 11801:9-2002 and EN50173-1:2002

Environmental Classification according to ISO/IEC 24702

Mechanical

Bump (3 times) 25g (250 m/s2)
Shock 25g (250 m/s2)
Vibration sinusoidal 2 - 500 Hz 0.35 mm 5g according IEC 60512 Test No. 6d
Tensile strength Free connector to cable 50 N

Ingress Protection Category

Protection category IP20 (optional IP67)

Climatic Category 40/070/21 according to IEC 60603-7-5

Ambient temperature -40°C to 70°C
Damp heat cyclic 5% to 85% non-condensing

Electromagnetic

Shielding effectiveness 4kV Electrostatic discharge – contact

8kV Electrostatic discharge – air
RF ISO/IEC 24702
Voltage proof 500V EFT/B and 1000V surge
Residual magnetism ISO/IEC 24702

Materials of Construction

Housing GD-Zn (die-cast zinc)
Molding parts PA

Relevant Standards and UL Listing

Premise cabling ISO/IEC 11801:2002, EN50173-1:2003, ISO/IEC 24702
Connectors IEC 60603-7-5
Standard for Communications Accessories UL 1863

#1401405012I field plug

#1401400810-I field plug insert for IP67 rated

RJ45 (optional) according to

ISO/IEC 24702 ISO 61076-3-106, variant 1

Part number

1401405012-I E-DAT Industry IP20 RJ45 field plug black
1401400810-I E-DAT Industry IP67 RJ45 field plug insert (optional)

Accessories

1401009101-I Industry color coding ring field plug orange
1401009103-I Industry color coding ring field plug lightgrey
1401009104-I Industry color coding ring field plug white
1401009105-I Industry color coding ring field plug yellow
1401009106-I Industry color coding ring field plug blue
1401009107-I Industry color coding ring field plug green

140301-E Locking Plyer wrench 1 3/8"

Ask us about channel link performance solutions! Call now for a complete BTR E-DAT™ component catalog.

BTR NETCOM, Inc. • 200 Tornillo Way, Tinton Falls NJ 07712

ph(732)380-8145 • fx(732)380-8147 • www.btr-netcom.com • www.riaconnect.com/btr.asp